Re: [Paparazzi-devel] Classix BOM help

[Alexis Lussier Desbiens]

Hope this help, you might want to double check as I remember that some
part were missing from the first order we did! You might not need all
the parts, or need more, depending on your configuration... Everything
work on my board so far...

If you go through it, make an order, and get everything you need the
first time you might want to put that on the wiki...

    Alexis

On 11/17/07, David Conger <address@hidden> wrote:
> Need assistance: Classix BOM conversion to Digikey/Mouser/? part numbers
> Problem: The Wiki says:
>   "The materials list can be produced from the Eagle CAD files on the
> downloads page."
> Simple enough, that creates something like:
> (Below is a partial output):
> Qty Value        Device            Parts
> 2                CPOL-EUA/3216-18R C7, C18
> 1                D-SOD-80          D1
> 4                LEDCHIP-LED0805   LED1, LED2, LED3, LED4
> 1                SJ2W              SJ1
> 4   1K           R-EU_R0603        R23, R24, R25, R26
> 1   1nF          C-EUC0603         C26
> 1   330uF        C-EUC0603         C23
> 1   4.7K         R-EU_R0603        R8
> 16  100nF        C-EUC0603         C1, C2, C3, C4, C5, C6, C9, C10,
> C11, C12, C14, C17, C19, C20, C21, C22
> 1   100pF        C-EUC0603         C24
> 1   CRYSTAL_CTS  CRYSTAL_CTS       U$20
> 2   REG1117      REG1117           IC1, IC2
>
> Now if I had manufacturers part numbers I can do the search as all
> suppliers have that. My request is for someone to put the
> manufacturers part numbers or some suppliers part number onto the
> Wiki or a link to a BOM for Classix, GPS13 and other Eagle Files for
> Paparazzi. Is this possible?
> Regards,
> David
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>


-- 
http://mecano.gme.usherb.ca/~alussierdesbiens
"De' remi facemmo ali"

classixbomtest.xls
Description: MS-Excel spreadsheet