[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] RC-link status indicator in gcs do not work as exp
From: |
gtoonstra |
Subject: |
Re: [Paparazzi-devel] RC-link status indicator in gcs do not work as expected |
Date: |
Mon, 17 Sep 2012 12:23:45 -0300 |
Another trick is to increase the throw to 125%, throttle to zero, set failsafe
and set throw back to 100%.
Rgds,
Gerard
On 17/09/2012, at 12:20, Gareth Roberts <address@hidden> wrote:
> Your receiver probably has failsafe built in, so it sets the controls to a
> predetermined position when it loses signal. You may be able to disable this
> behaviour in your transmitter or receiver.
>
> Failing that, I vaguely remember some method involving setting the failsafe
> of a spare channel you don't use to something other than what it is when the
> TX is on, then using this 'switch' to let the autopilot know the RC link is
> lost.
> Try searching through the mailing list archives or see if such a module
> exists.
>
> Cheers,
> Gareth
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel