paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Apogee/v1.00


From: Michel GORRAZ
Subject: Re: [Paparazzi-devel] Apogee/v1.00
Date: Wed, 24 Jul 2013 11:42:28 +0200

Hi,
Looks like there is no way to invert Rx signal of an UART inside the STM32 MCU, so you need an external inverter.
Have a look at the Apogee schematics on the wiki page (releasing it right now :) ) ...

Michel


2013/7/24 Miguel Torres <address@hidden>
I noticed the adition of Futaba SBUS support with this board. I was planning to upgrade to a futaba sbus receiver so this is a great feature! Anyway I was wondering if Lisa/M is capable of running the sbus code without any hardware modification, since sbus needs signal inversion.

Best regards and great job!


El 23/07/13 21:25, Eduardo lavratti escribió:
YEap, very nice board but has only 6 servo output.
My plane use 8 servos only to control surfaces and motor.
I need more 2 for the gimbal

So ... this board is useless to me unless i add a i2c servo controller.
Its very good to very small planes.

Date: Tue, 23 Jul 2013 16:16:33 -0400
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] Apogee/v1.00

hi to all...i view in the wiki the apogee new board...this new board look  very nice and small...what store sold the new board?
Luis Carlos

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


Miquel Ángel Torres Gil

Instituto Tecnológico y de Energías Renovables, S.A. (ITER, S.A.)

Polígono Industrial de Granadilla, s/n 38600 - Granadilla de Abona
Santa Cruz de Tenerife - España (Spain)

TEL: + 34 922-747-700;   FAX: +34 922-747-701

www.iter.es

Antes de imprimir este e-mail piense bien si es necesario hacerlo. El medioambiente es cosa de todos.

Please consider your environmental responsibility. Before printing this e-mail, ask yourself whether you really need a hard copy.

ADVERTENCIA:

   La información incluida en este e-mail es CONFIDENCIAL, siendo para uso exclusivo del destinatario arriba mencionado. Si Usted lee este mensaje y no es el destinatario indicado, le informamos que está totalmente prohibida cualquier utilización, divulgación, distribución y/o reproducción de esta comunicación sin autorización expresa en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos nos lo notifique inmediatamente por esta misma vía a GRUPO ITER, S.A. y proceda a su eliminación.

DISCLAIMER:

   This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail to GRUPO ITER, S.A. and delete it.



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]