paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Using 2 RC receivers on board


From: Chris
Subject: Re: [Paparazzi-devel] Using 2 RC receivers on board
Date: Thu, 08 May 2014 23:16:51 +0300
User-agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.5.0

You don't need two, use the Frsky ACCST system (actually developed by ACT Germany) and fly happily
without problems.
If you insist i think paparazzi autopilots can use two spectrum receivers which personally i don't trust at all.
Have a look in the wiki under Hardware -> autopilots
Chris


On 05/08/2014 07:55 PM, GalapagosUAV wrote:
Dear all,


I would like to know if anyone has ever used 2 RC receivers on board for 
redundancy purposes? If yes, how can I do this? What I would like to do is 
while having one receiver connected to the autopilot via de PPM encoder, have 
another one that is not connected to autopilot but goes directly to the servos 
in case of autopilot failure.

Best Regards,
Jorge
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]