paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Could not find STM32 device


From: John Voegeli
Subject: Re: [Paparazzi-devel] Could not find STM32 device
Date: Fri, 25 Jul 2014 20:48:56 +0000

So something like:

ATTR{manufacturer}==“1 BIT SQUARED", ATTR{product}=="Lisa/M V2.1
(Upgrade)*", GROUP="plugdev"


On 7/25/14, 4:46 PM, "Piotr Esden-Tempski" <address@hidden> wrote:

>Yes "1 BIT SQUARED" should be added to the udev script too.
>
>On Jul 25, 2014, at 13:39, John Voegeli <address@hidden> wrote:
>
>> Piotr that is what I get as well. The udev rule looks like this (default
>> from vanilla version of Paparazzi):
>> 
>> ATTR{manufacturer}=="Transition Robotics Inc.", ATTR{product}=="Lisa/M
>> (Upgrade)*", GROUP=³plugdev"
>> 
>> Should it be different to match? I am not very good with udev rules.
>> 
>> 
>> 
>> On 7/25/14, 4:25 PM, "Piotr Esden-Tempski" <address@hidden> wrote:
>> 
>>> Just to make sure this is the output I am getting connecting a Lisa/M:
>>> 
>>> $ sudo lsusb -v
>>> [snip]
>>> Bus 003 Device 002: ID 1d50:600f OpenMoko, Inc.
>>> Device Descriptor:
>>> bLength 18
>>> bDescriptorType 1
>>> bcdUSB 2.00
>>> bDeviceClass 0 (Defined at Interface level)
>>> bDeviceSubClass 0
>>> bDeviceProtocol 0
>>> bMaxPacketSize0 64
>>> idVendor 0x1d50 OpenMoko, Inc.
>>> idProduct 0x600f
>>> bcdDevice 1.00
>>> iManufacturer 1 1 BIT SQUARED
>>> iProduct 2 Lisa/M V2.1 (Upgrade) V1.1
>>> iSerial 3 LM21005 35FFDC053256383336622143
>>> bNumConfigurations 1
>>> Configuration Descriptor:
>>> bLength 9
>>> bDescriptorType 2
>>> wTotalLength 27
>>> bNumInterfaces 1
>>> bConfigurationValue 1
>>> iConfiguration 0
>>> bmAttributes 0xc0
>>> Self Powered
>>> MaxPower 100mA
>>> Interface Descriptor:
>>> bLength 9
>>> bDescriptorType 4
>>> bInterfaceNumber 0
>>> bAlternateSetting 0
>>> bNumEndpoints 0
>>> bInterfaceClass 254 Application Specific Interface
>>> bInterfaceSubClass 1 Device Firmware Update
>>> bInterfaceProtocol 2
>>> iInterface 4 @Internal Flash /0x08000000/4*002Ka,124*002Kg
>>> Device Firmware Upgrade Interface Descriptor:
>>> bLength 9
>>> bDescriptorType 33
>>> bmAttributes 9
>>> Will Detach
>>> Manifestation Intolerant
>>> Upload Unsupported
>>> Download Supported
>>> wDetachTimeout 255 milliseconds
>>> wTransferSize 2048 bytes
>>> bcdDFUVersion 1.1a
>>> Device Status: 0x0000
>>> (Bus Powered)
>>> [snip]
>>> 
>>> OpenMoko is correct. We are using the free device IDs generously
>>> provided by OpenMoko.
>>> 
>>> Cheers,
>>> Piotr
>>> 
>>> On 07/25/2014 12:47 PM, John Voegeli wrote:
>>>> Yes Felix I sure do. I originally has a bad cable causing it not to
>>>> power correctly, but since then it does the cylon flashing pattern
>>>> when plugged in USB.
>>>> 
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>> On Jul 25, 2014, at 15:42, "Felix Ruess" <address@hidden
>>>> <mailto:address@hidden>> wrote:
>>>> 
>>>>> Hi,
>>>>> 
>>>>> the board does not seem to be in bootloader mode, it should show up
>>>>> as Lisa/M
>>>>> Do you see the LEDs flashing like this
>>>>> https://wiki.paparazziuav.org/wiki/Lisa/M_v2.0#Using_luftboot ?
>>>>> 
>>>>> Cheers, Felix
>>>>> 
>>>>> 
>>>>> On Fri, Jul 25, 2014 at 5:52 PM, John Voegeli <address@hidden
>>>>> <mailto:address@hidden>> wrote:
>>>>> 
>>>>>    Does not work with sudo either. Tried that last night I thought
>>>>>    maybe a permissions issues as well. It just says it cannot find
>>>>>it.
>>>>> 
>>>>>    From: AFISH <address@hidden
>>>>>    <mailto:address@hidden>>
>>>>>    Reply-To: Paparazzi UAV devel list <address@hidden
>>>>>    <mailto:address@hidden>>
>>>>>    Date: Friday, July 25, 2014 at 11:47 AM
>>>>>    To: Paparazzi UAV devel list <address@hidden
>>>>>    <mailto:address@hidden>>
>>>>>    Cc: Paparazzi UAV devel list <address@hidden
>>>>>    <mailto:address@hidden>>
>>>>> 
>>>>>    Subject: Re: [Paparazzi-devel] Could not find STM32 device
>>>>> 
>>>>>    Try to run sudo ./paparazzi, if you get link established, it will
>>>>>    shows you need add to some group
>>>>>    ‹
>>>>>    Sent from Mailbox <https://www.dropbox.com/mailbox> for iPhone
>>>>> 
>>>>> 
>>>>>    On Fri, Jul 25, 2014 at 10:16 AM, John Voegeli
>>>>>    <address@hidden <mailto:address@hidden>> wrote:
>>>>> 
>>>>>        Yes I have permission I followed those steps... Here is the
>>>>>        output for the device that shows up when plugging in the Lisa
>>>>>        M to USB.
>>>>> 
>>>>>        Bus 002 Device 003: ID 1d50:600f OpenMoko, Inc.
>>>>>        Couldn't open device, some information will be missing
>>>>>        Device Descriptor:
>>>>>        bLength 18
>>>>>        bDescriptorType 1
>>>>>        bcdUSB 2.00
>>>>>        bDeviceClass 0 (Defined at Interface level)
>>>>>        bDeviceSubClass 0
>>>>>        bDeviceProtocol 0
>>>>>        bMaxPacketSize0 64
>>>>>        idVendor 0x1d50 OpenMoko, Inc.
>>>>>        idProduct 0x600f
>>>>>        bcdDevice 1.00
>>>>>        iManufacturer 1
>>>>>        iProduct 2
>>>>>        iSerial 3
>>>>>        bNumConfigurations 1
>>>>>        Configuration Descriptor:
>>>>>        bLength 9
>>>>>        bDescriptorType 2
>>>>>        wTotalLength 27
>>>>>        bNumInterfaces 1
>>>>>        bConfigurationValue 1
>>>>>        iConfiguration 0
>>>>>        bmAttributes 0xc0
>>>>>        Self Powered
>>>>>        MaxPower 100mA
>>>>>        Interface Descriptor:
>>>>>        bLength 9
>>>>>        bDescriptorType 4
>>>>>        bInterfaceNumber 0
>>>>>        bAlternateSetting 0
>>>>>        bNumEndpoints 0
>>>>>        bInterfaceClass 254 Application Specific Interface
>>>>>        bInterfaceSubClass 1 Device Firmware Update
>>>>>        bInterfaceProtocol 2
>>>>>        iInterface 4
>>>>>        Device Firmware Upgrade Interface Descriptor:
>>>>>        bLength 9
>>>>>        bDescriptorType 33
>>>>>        bmAttributes 9
>>>>>        Will Detach
>>>>>        Manifestation Intolerant
>>>>>        Upload Unsupported
>>>>>        Download Supported
>>>>>        wDetachTimeout 255 milliseconds
>>>>>        wTransferSize 2048 bytes
>>>>>        bcdDFUVersion 1.1a
>>>>> 
>>>>> 
>>>>>        ________________________________________
>>>>>        From:
>>>>>        address@hidden
>>>>> 
>>>>> <mailto:address@hidden>
>>>>>        <address@hidden
>>>>> 
>>>>> <mailto:address@hidden>>
>>>>>        on behalf of Piotr Esden-Tempski <address@hidden
>>>>>        <mailto:address@hidden>>
>>>>>        Sent: Friday, July 25, 2014 3:18 AM
>>>>>        To: Paparazzi UAV devel list
>>>>>        Subject: Re: [Paparazzi-devel] Could not find STM32 device
>>>>> 
>>>>>        Hi John,
>>>>> 
>>>>>        Do you have permissions to access the DFU device?
>>>>> 
>>>>>        
>>>>>http://wiki.paparazziuav.org/wiki/Installation/Linux#Udev_rules
>>>>> 
>>>>>        If you run lsusb -v is the Lisa/M listed?
>>>>> 
>>>>>        Cheers,
>>>>>        Piotr
>>>>> 
>>>>>        On Jul 24, 2014, at 20:57, John Voegeli
>>>>>        <address@hidden <mailto:address@hidden>>
>>>>>wrote:
>>>>> 
>>>>>> Hey all,
>>>>>> 
>>>>>> Sorry if this has been answered before. I googled and
>>>>>        searched all over the site and could not find anything. I
>>>>>        have the new Lisa M 2.1 and I am trying to flash it however I
>>>>>        keep getting Could not find STM32 (autopilot) device Failed
>>>>>        messages. I have tried everything and am at a loss. Any
>>>>>        suggestions?
>>>>>> _______________________________________________
>>>>>> Paparazzi-devel mailing list
>>>>>> address@hidden
>>>>> <mailto:address@hidden>
>>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>> 
>>>>> 
>>>>>        _______________________________________________
>>>>>        Paparazzi-devel mailing list
>>>>>        address@hidden <mailto:address@hidden>
>>>>>        https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>> 
>>>>>        _______________________________________________
>>>>>        Paparazzi-devel mailing list
>>>>>        address@hidden <mailto:address@hidden>
>>>>>        https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>> 
>>>>> 
>>>>> 
>>>>>    _______________________________________________
>>>>>    Paparazzi-devel mailing list
>>>>>    address@hidden <mailto:address@hidden>
>>>>>    https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Paparazzi-devel mailing list
>>>>> address@hidden <mailto:address@hidden>
>>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>_______________________________________________
>Paparazzi-devel mailing list
>address@hidden
>https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]