[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Apogee board availability
From: |
Jan Čapek |
Subject: |
Re: [Paparazzi-devel] Apogee board availability |
Date: |
Tue, 14 Jul 2015 09:00:31 +0200 |
Hi,
first of all, thanks everybody for valuable input. We are considering
manufacturing a batch of the boards as we also find the board very
sophisticated and useful. I will let you know how it goes. In this
case, the boards would be available from the center of Europe ;-)
Cheers,
Jan
Dne Tue, 14 Jul 2015 07:11:59 +0200
Andreas Philipp <address@hidden> napsal(a):
> Yes, they send from HongKong. I used HongKong Speed Post which was
> always OK, allows tracking and always took less than a week from
> HongKong to Germany! The last one even took only three days. However
> it takes some time (~2-3 weeks) until the board is produced ...
>
> Cheers,
> Andreas
>
>
> Am 14.07.2015 01:16, schrieb Michal Podhradsky:
> > Just FYI the Droneasy.com is located in Hong Kong, that will help
> > you to estimate the shipping time.
> > M
> >
> > On Mon, Jul 13, 2015 at 3:53 PM, Stephen L Hulme
> > <address@hidden <mailto:address@hidden>> wrote:
> >
> > Hi Gautier
> >
> > A cut and past of a reply to an order I placed with Droneasy on
> > or around Sept 2013 -
> >
> > Stephen,
> > Thank you for your order. There are 9 DOF and 6 DOF IMU version.
> > Which version do you need?
> > 6 or 9 DOF IMU
> > Apogee v1.00 PCB offer two Invensense IMU chip options:
> > MPU-6050 : 6 DOF, 3 axis Accelerometer + 3 axis Gyroscope
> > MPU-9150 : 9 DOF, 3 axis Accelerometer + 3 axis Gyroscope + 3
> > axis Magnetometer
> > Regards
> > Ralph Wu
> > Droneasy Inc.
> > M: +852 91315364 <tel:%2B852%2091315364> E:
> > address@hidden <mailto:address@hidden> W:
> > www.droneasy.com <http://www.droneasy.com>
> >
> > I chose 9 DOF option and bench tested using ENAC's airframe with
> > external Mag.
> > Seemed OK - but it has yet to fly.
> >
> > Regards
> >
> > Stephen
> >
> >
> > On Tuesday, July 14, 2015 10:12 AM Gautier Hattenberger wrote:
> > Hello,
> >
> > As Andreas said, the Apogee board is not obsolete at all and we
> > are using it in all our airframes at Enac. Unfortunately, since
> > PPZUAV stopped his business for an undefined period, it is a bit
> > difficult to find suppliers.
> > I'm glad to see someone is manufacturing them again. We are
> > also looking for some other suppliers to make it more easily
> > available. Andreas, do you know from which country droneasy is ?
> > Are they shipping worldwide ?
> >
> > Regards
> >
> > Gautier
> >
> > Le 13/07/2015 19:29, Andreas Philipp a écrit :
> >
> > Hi,
> >
> > since the source from http://ppzuav.com/ (where I order
> > one) is dry now,
> > due to the absence of David, I ordered several boards from
> >
> > http://www.droneasy.com/index.php/electronics/flight-controllers-2/paparazzi-apogee.html.
> >
> > I order the boards even if they are on backorder (I guess
> > they are just
> > produced when there is an order) but it takes only around 4
> > weeks from
> > the order placement until it has arrived to Europe
> > (including some visits at the customs). The quality seems good (in
> > contrast to some former discussions). I just had one out of 6
> > boards which did not work
> > properly, but it was no problem to send it back and get a
> > replacement
> > (paid one shipping direction).
> >
> > In my opinion this board is by far not obsolete but
> > extremely useful (at
> > least for meteorological measurements) since it brings the
> > sd-card and
> > logging function onboard (easy to write, easy to read). You
> > just have to
> > decide between 9dof and 6dof imu. I unfortunately used to
> > order the former ones (9dof), but now cannot use the barometer
> > since the I2C adress changed (something Gautier fixed already but I
> > got it to work only for multicopters not for fixedwing airframes
> > and it is not yet included in the master branch). Thus, if you want
> > to use the barometer
> > easily order the 6dof imu (Gautier also said the
> > magnetometer is not very precise, if I remember correctly). But all
> > in all I'm very happy
> > with this board!
> >
> > Hope that helps,
> > Andreas
> >
> > On 13.07.2015 15:37, Jan Čapek wrote:
> >
> > Hi,
> >
> > I am interested in getting one/few of the Apogee boards
> > for testing. I
> > have researched all the relevant links from the wiki,
> > none of the listed
> > companies have this board in stock. Everything is on
> > backorder. Is the
> > board already considered obsolete? If so, why?
> > Is there possible somebody in the list devel list who
> > can sell one of his assembled boards, please let me
> > know.
> >
> > Best regards,
> >
> > Jan Capek
> >
> >
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > <mailto:address@hidden>
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden <mailto:address@hidden>
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden <mailto:address@hidden>
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
--
Braiins Systems
tel: +420 604 566 382
email: address@hidden