[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC v4 2/9] qemu-io: add zoned block device operations.
From: |
Damien Le Moal |
Subject: |
Re: [RFC v4 2/9] qemu-io: add zoned block device operations. |
Date: |
Tue, 12 Jul 2022 16:44:12 +0900 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.11.0 |
On 7/12/22 11:13, Sam Li wrote:
> Add zoned storage commands of the device: zone_open(zo), zone_close(zc),
> zone_reset(zs), zone_report(zp), zone_finish(zf).
>
> For example, it can be called by:
> ./build/qemu-io --image-opts driver=zoned_host_device, filename=/dev/nullb0
> -c "zone_report 0 0 1"
I would move this patch and also patch 5 last in the series, so that the
tests are added once all the code is in place.
>
> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> ---
> block/io.c | 57 ++++++++++++++++
> include/block/block-io.h | 13 ++++
> qemu-io-cmds.c | 143 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 213 insertions(+)
>
> diff --git a/block/io.c b/block/io.c
> index 1e9bf09a49..a760be0131 100644
> --- a/block/io.c
> +++ b/block/io.c
> @@ -3243,6 +3243,63 @@ out:
> return co.ret;
> }
>
> +int bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> + int64_t *nr_zones,
> + BlockZoneDescriptor *zones)
> +{
> + BlockDriver *drv = bs->drv;
> + CoroutineIOCompletion co = {
> + .coroutine = qemu_coroutine_self(),
> + };
> + IO_CODE();
> +
> + bdrv_inc_in_flight(bs);
> + if (!drv || (!drv->bdrv_co_zone_report)) {
> + co.ret = -ENOTSUP;
> + goto out;
> + }
> +
> + if (drv->bdrv_co_zone_report) {
> + co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
> + } else {
> + co.ret = -ENOTSUP;
> + goto out;
> + qemu_coroutine_yield();
> + }
> +
> +out:
> + bdrv_dec_in_flight(bs);
> + return co.ret;
> +}
> +
> +int bdrv_co_zone_mgmt(BlockDriverState *bs, enum zone_op op,
> + int64_t offset, int64_t len)
> +{
> + BlockDriver *drv = bs->drv;
> + CoroutineIOCompletion co = {
> + .coroutine = qemu_coroutine_self(),
> + };
> + IO_CODE();
> +
> + bdrv_inc_in_flight(bs);
> + if (!drv || (!drv->bdrv_co_zone_mgmt)) {
> + co.ret = -ENOTSUP;
> + goto out;
> + }
> +
> + if (drv->bdrv_co_zone_mgmt) {
> + co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
> + } else {
> + co.ret = -ENOTSUP;
> + goto out;
> + qemu_coroutine_yield();
> + }
> +
> +out:
> + bdrv_dec_in_flight(bs);
> + return co.ret;
> +}
> +
> void *qemu_blockalign(BlockDriverState *bs, size_t size)
> {
> IO_CODE();
> diff --git a/include/block/block-io.h b/include/block/block-io.h
> index 053a27141a..a0ae140452 100644
> --- a/include/block/block-io.h
> +++ b/include/block/block-io.h
> @@ -80,6 +80,13 @@ int bdrv_co_ioctl(BlockDriverState *bs, int req, void
> *buf);
> /* Ensure contents are flushed to disk. */
> int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
>
> +/* Report zone information of zone block device. */
> +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> + int64_t *nr_zones,
> + BlockZoneDescriptor *zones);
> +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, zone_op op,
> + int64_t offset, int64_t len);
> +
> int bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int64_t bytes);
> bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
> int bdrv_block_status(BlockDriverState *bs, int64_t offset,
> @@ -289,6 +296,12 @@ bdrv_readv_vmstate(BlockDriverState *bs, QEMUIOVector
> *qiov, int64_t pos);
> int generated_co_wrapper
> bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
>
> +int generated_co_wrapper
> +blk_zone_report(BlockBackend *blk, int64_t offset, int64_t *nr_zones,
> + BlockZoneDescriptor *zones);
> +int generated_co_wrapper
> +blk_zone_mgmt(BlockBackend *blk, enum zone_op op, int64_t offset, int64_t
> len);
> +
> /**
> * bdrv_parent_drained_begin_single:
> *
> diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
> index 2f0d8ac25a..a88fa322d2 100644
> --- a/qemu-io-cmds.c
> +++ b/qemu-io-cmds.c
> @@ -1706,6 +1706,144 @@ static const cmdinfo_t flush_cmd = {
> .oneline = "flush all in-core file state to disk",
> };
>
> +static int zone_report_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, nr_zones;
> +
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + nr_zones = cvtnum(argv[optind]);
> +
> + g_autofree BlockZoneDescriptor *zones = NULL;
> + zones = g_new(BlockZoneDescriptor, nr_zones);
> + ret = blk_zone_report(blk, offset, &nr_zones, zones);
> + if (ret < 0) {
> + printf("zone report failed: %s\n", strerror(-ret));
> + } else {
> + for (int i = 0; i < nr_zones; ++i) {
> + printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
> + "cap"" 0x%" PRIx64 ",wptr 0x%" PRIx64 ", "
> + "zcond:%u, [type: %u]\n",
> + zones[i].start, zones[i].length, zones[i].cap,
> zones[i].wp,
> + zones[i].cond, zones[i].type);
> + }
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_report_cmd = {
> + .name = "zone_report",
> + .altname = "zp",
> + .cfunc = zone_report_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset number",
> + .oneline = "report zone information",
> +};
> +
> +static int zone_open_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, zone_open, offset, len);
> + if (ret < 0) {
> + printf("zone open failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_open_cmd = {
> + .name = "zone_open",
> + .altname = "zo",
> + .cfunc = zone_open_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "explicit open a range of zones in zone block device",
> +};
> +
> +static int zone_close_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, zone_close, offset, len);
> + if (ret < 0) {
> + printf("zone close failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_close_cmd = {
> + .name = "zone_close",
> + .altname = "zc",
> + .cfunc = zone_close_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "close a range of zones in zone block device",
> +};
> +
> +static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, zone_finish, offset, len);
> + if (ret < 0) {
> + printf("zone finish failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_finish_cmd = {
> + .name = "zone_finish",
> + .altname = "zf",
> + .cfunc = zone_finish_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "finish a range of zones in zone block device",
> +};
> +
> +static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, zone_reset, offset, len);
> + if (ret < 0) {
> + printf("zone reset failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_reset_cmd = {
> + .name = "zone_reset",
> + .altname = "zrs",
> + .cfunc = zone_reset_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "reset a zone write pointer in zone block device",
> +};
> +
> +
> static int truncate_f(BlockBackend *blk, int argc, char **argv);
> static const cmdinfo_t truncate_cmd = {
> .name = "truncate",
> @@ -2498,6 +2636,11 @@ static void __attribute((constructor))
> init_qemuio_commands(void)
> qemuio_add_command(&aio_write_cmd);
> qemuio_add_command(&aio_flush_cmd);
> qemuio_add_command(&flush_cmd);
> + qemuio_add_command(&zone_report_cmd);
> + qemuio_add_command(&zone_open_cmd);
> + qemuio_add_command(&zone_close_cmd);
> + qemuio_add_command(&zone_finish_cmd);
> + qemuio_add_command(&zone_reset_cmd);
> qemuio_add_command(&truncate_cmd);
> qemuio_add_command(&length_cmd);
> qemuio_add_command(&info_cmd);
--
Damien Le Moal
Western Digital Research
- Re: [RFC v4 1/9] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls., (continued)
[RFC v4 3/9] file-posix: introduce get_sysfs_long_val for a block queue of sysfs attribute, Sam Li, 2022/07/11
[RFC v4 2/9] qemu-io: add zoned block device operations., Sam Li, 2022/07/11
[RFC v4 4/9] file-posix: introduce get_sysfs_str_val for device zoned model., Sam Li, 2022/07/11
[RFC v4 5/9] qemu-iotests: test new zone operations., Sam Li, 2022/07/11