[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v10 3/7] block: add block layer APIs resembling Linux ZonedBl
From: |
Sam Li |
Subject: |
Re: [PATCH v10 3/7] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls |
Date: |
Sat, 8 Oct 2022 11:42:17 +0800 |
Damien Le Moal <damien.lemoal@opensource.wdc.com> 于2022年10月4日周二 07:23写道:
>
> On 2022/10/04 2:47, Stefan Hajnoczi wrote:
> > On Thu, Sep 29, 2022 at 04:36:27PM +0800, Sam Li wrote:
> >> Add a new zoned_host_device BlockDriver. The zoned_host_device option
> >> accepts only zoned host block devices. By adding zone management
> >> operations in this new BlockDriver, users can use the new block
> >> layer APIs including Report Zone and four zone management operations
> >> (open, close, finish, reset).
> >>
> >> Qemu-io uses the new APIs to perform zoned storage commands of the device:
> >> zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
> >> zone_finish(zf).
> >>
> >> For example, to test zone_report, use following command:
> >> $ ./build/qemu-io --image-opts -n driver=zoned_host_device,
> >> filename=/dev/nullb0
> >> -c "zrp offset nr_zones"
> >>
> >> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> >> Reviewed-by: Hannes Reinecke <hare@suse.de>
> >> ---
> >> block/block-backend.c | 146 +++++++++++++
> >> block/file-posix.c | 340 +++++++++++++++++++++++++++++-
> >> block/io.c | 41 ++++
> >> include/block/block-common.h | 4 +
> >> include/block/block-io.h | 7 +
> >> include/block/block_int-common.h | 24 +++
> >> include/block/raw-aio.h | 6 +-
> >> include/sysemu/block-backend-io.h | 17 ++
> >> meson.build | 4 +
> >> qapi/block-core.json | 8 +-
> >> qemu-io-cmds.c | 148 +++++++++++++
> >> 11 files changed, 741 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/block/block-backend.c b/block/block-backend.c
> >> index d4a5df2ac2..f7f7acd6f4 100644
> >> --- a/block/block-backend.c
> >> +++ b/block/block-backend.c
> >> @@ -1431,6 +1431,15 @@ typedef struct BlkRwCo {
> >> void *iobuf;
> >> int ret;
> >> BdrvRequestFlags flags;
> >> + union {
> >> + struct {
> >> + unsigned int *nr_zones;
> >> + BlockZoneDescriptor *zones;
> >> + } zone_report;
> >> + struct {
> >> + BlockZoneOp op;
> >> + } zone_mgmt;
> >> + };
> >> } BlkRwCo;
> >>
> >> int blk_make_zero(BlockBackend *blk, BdrvRequestFlags flags)
> >> @@ -1775,6 +1784,143 @@ int coroutine_fn blk_co_flush(BlockBackend *blk)
> >> return ret;
> >> }
> >>
> >> +static void blk_aio_zone_report_entry(void *opaque) {
> >
> >
> > The coroutine_fn annotation is missing:
> >
> > static void coroutine_fn blk_aio_zone_report_entry(void *opaque) {
> >
> >> + BlkAioEmAIOCB *acb = opaque;
> >> + BlkRwCo *rwco = &acb->rwco;
> >> +
> >> + rwco->ret = blk_co_zone_report(rwco->blk, rwco->offset,
> >> + rwco->zone_report.nr_zones,
> >> + rwco->zone_report.zones);
> >> + blk_aio_complete(acb);
> >> +}
> >> +
> >> +BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones,
> >> + BlockCompletionFunc *cb, void *opaque)
> >> +{
> >> + BlkAioEmAIOCB *acb;
> >> + Coroutine *co;
> >> + IO_CODE();
> >> +
> >> + blk_inc_in_flight(blk);
> >> + acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
> >> + acb->rwco = (BlkRwCo) {
> >> + .blk = blk,
> >> + .offset = offset,
> >> + .ret = NOT_DONE,
> >> + .zone_report = {
> >> + .zones = zones,
> >> + .nr_zones = nr_zones,
> >> + },
> >> + };
> >> + acb->has_returned = false;
> >> +
> >> + co = qemu_coroutine_create(blk_aio_zone_report_entry, acb);
> >> + bdrv_coroutine_enter(blk_bs(blk), co);
> >> +
> >> + acb->has_returned = true;
> >> + if (acb->rwco.ret != NOT_DONE) {
> >> + replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
> >> + blk_aio_complete_bh, acb);
> >> + }
> >> +
> >> + return &acb->common;
> >> +}
> >> +
> >> +static void blk_aio_zone_mgmt_entry(void *opaque) {
> >
> > coroutine_fn is missing here.
> >
> >> + BlkAioEmAIOCB *acb = opaque;
> >> + BlkRwCo *rwco = &acb->rwco;
> >> +
> >> + rwco->ret = blk_co_zone_mgmt(rwco->blk, rwco->zone_mgmt.op,
> >> + rwco->offset, acb->bytes);
> >> + blk_aio_complete(acb);
> >> +}
> >> +
> >> +BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> >> + int64_t offset, int64_t len,
> >> + BlockCompletionFunc *cb, void *opaque) {
> >> + BlkAioEmAIOCB *acb;
> >> + Coroutine *co;
> >> + IO_CODE();
> >> +
> >> + blk_inc_in_flight(blk);
> >> + acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
> >> + acb->rwco = (BlkRwCo) {
> >> + .blk = blk,
> >> + .offset = offset,
> >> + .ret = NOT_DONE,
> >> + .zone_mgmt = {
> >> + .op = op,
> >> + },
> >> + };
> >> + acb->bytes = len;
> >> + acb->has_returned = false;
> >> +
> >> + co = qemu_coroutine_create(blk_aio_zone_mgmt_entry, acb);
> >> + bdrv_coroutine_enter(blk_bs(blk), co);
> >> +
> >> + acb->has_returned = true;
> >> + if (acb->rwco.ret != NOT_DONE) {
> >> + replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
> >> + blk_aio_complete_bh, acb);
> >> + }
> >> +
> >> + return &acb->common;
> >> +}
> >> +
> >> +/*
> >> + * Send a zone_report command.
> >> + * offset is a byte offset from the start of the device. No alignment
> >> + * required for offset.
> >> + * nr_zones represents IN maximum and OUT actual.
> >> + */
> >> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones)
> >> +{
> >> + int ret;
> >> + IO_CODE();
> >> +
> >> + blk_inc_in_flight(blk); /* increase before waiting */
> >> + blk_wait_while_drained(blk);
> >> + if (!blk_is_available(blk)) {
> >> + blk_dec_in_flight(blk);
> >> + return -ENOMEDIUM;
> >> + }
> >> + ret = bdrv_co_zone_report(blk_bs(blk), offset, nr_zones, zones);
> >> + blk_dec_in_flight(blk);
> >> + return ret;
> >> +}
> >> +
> >> +/*
> >> + * Send a zone_management command.
> >> + * op is the zone operation;
> >> + * offset is the byte offset from the start of the zoned device;
> >> + * len is the maximum number of bytes the command should operate on. It
> >> + * should be aligned with the device zone size.
> >> + */
> >> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> >> + int64_t offset, int64_t len)
> >> +{
> >> + int ret;
> >> + IO_CODE();
> >> +
> >> +
> >> + blk_inc_in_flight(blk);
> >> + blk_wait_while_drained(blk);
> >> +
> >> + ret = blk_check_byte_request(blk, offset, len);
> >> + if (ret < 0) {
> >> + blk_dec_in_flight(blk);
> >> + return ret;
> >> + }
> >> +
> >> + ret = bdrv_co_zone_mgmt(blk_bs(blk), op, offset, len);
> >> + blk_dec_in_flight(blk);
> >> + return ret;
> >> +}
> >> +
> >> void blk_drain(BlockBackend *blk)
> >> {
> >> BlockDriverState *bs = blk_bs(blk);
> >> diff --git a/block/file-posix.c b/block/file-posix.c
> >> index 0a8b4b426e..0a6c781201 100644
> >> --- a/block/file-posix.c
> >> +++ b/block/file-posix.c
> >> @@ -67,6 +67,9 @@
> >> #include <sys/param.h>
> >> #include <sys/syscall.h>
> >> #include <sys/vfs.h>
> >> +#if defined(CONFIG_BLKZONED)
> >> +#include <linux/blkzoned.h>
> >> +#endif
> >> #include <linux/cdrom.h>
> >> #include <linux/fd.h>
> >> #include <linux/fs.h>
> >> @@ -216,6 +219,15 @@ typedef struct RawPosixAIOData {
> >> PreallocMode prealloc;
> >> Error **errp;
> >> } truncate;
> >> + struct {
> >> + unsigned int *nr_zones;
> >> + BlockZoneDescriptor *zones;
> >> + } zone_report;
> >> + struct {
> >> + unsigned long zone_op;
> >> + const char *zone_op_name;
> >> + bool all;
> >
> > Please remove this field if it is unused.
> >
> >> + } zone_mgmt;
> >> };
> >> } RawPosixAIOData;
> >>
> >> @@ -1339,7 +1351,7 @@ static void raw_refresh_limits(BlockDriverState *bs,
> >> Error **errp)
> >> #endif
> >>
> >> if (bs->sg || S_ISBLK(st.st_mode)) {
> >> - int ret = hdev_get_max_hw_transfer(s->fd, &st);
> >> + ret = hdev_get_max_hw_transfer(s->fd, &st);
> >>
> >> if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
> >> bs->bl.max_hw_transfer = ret;
> >> @@ -1356,6 +1368,41 @@ static void raw_refresh_limits(BlockDriverState
> >> *bs, Error **errp)
> >> zoned = BLK_Z_NONE;
> >> }
> >> bs->bl.zoned = zoned;
> >> + if (zoned != BLK_Z_NONE) {
> >> + ret = get_sysfs_long_val(&st, "chunk_sectors");
> >> + if (ret <= 0) {
> >> + error_report("Invalid zone size %" PRId32 " sectors ", ret);
> >> + bs->bl.zoned = BLK_Z_NONE;
> >> + return;
> >> + }
> >> + bs->bl.zone_size = ret * 512;
> >> +
> >> + ret = get_sysfs_long_val(&st, "zone_append_max_bytes");
> >> + if (ret > 0) {
> >> + bs->bl.max_append_sectors = ret / 512;
> >> + }
> >> +
> >> + ret = get_sysfs_long_val(&st, "max_open_zones");
> >> + if (ret >= 0) {
> >> + bs->bl.max_open_zones = ret;
> >> + }
> >> +
> >> + ret = get_sysfs_long_val(&st, "max_active_zones");
> >> + if (ret >= 0) {
> >> + bs->bl.max_active_zones = ret;
> >> + }
> >> +
> >> + ret = get_sysfs_long_val(&st, "nr_zones");
> >> + if (ret >= 0) {
> >> + bs->bl.nr_zones = ret;
> >> + }
> >> +
> >> + ret = ioctl(s->fd, BLKGETSIZE64, &bs->bl.capacity);
> >> + if (ret != 0) {
> >> + error_report("Invalid device capacity %" PRId64 " bytes ",
> >> bs->bl.capacity);
> >> + return;
> >> + }
> >
> > The QEMU block layer already knows the capacity of the device. Can
> > bdrv_getlength() be used instead of introducing a new
> > BlockLimits.capacity field?
> >
> >> + }
> >> }
> >>
> >> static int check_for_dasd(int fd)
> >> @@ -1850,6 +1897,147 @@ static off_t copy_file_range(int in_fd, off_t
> >> *in_off, int out_fd,
> >> }
> >> #endif
> >>
> >> +/*
> >> + * parse_zone - Fill a zone descriptor
> >> + */
> >> +#if defined(CONFIG_BLKZONED)
> >> +static inline void parse_zone(struct BlockZoneDescriptor *zone,
> >> + const struct blk_zone *blkz,
> >> + const struct blk_zone_report *rep) {
> >> + zone->start = blkz->start << BDRV_SECTOR_BITS;
> >> + zone->length = blkz->len << BDRV_SECTOR_BITS;
> >> + zone->wp = blkz->wp << BDRV_SECTOR_BITS;
> >> +
> >> + if (rep->flags & BLK_ZONE_REP_CAPACITY) {
> >> + zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
> >
> > #ifdef HAVE_BLK_ZONE_REP_CAPACITY is needed since the rep->flags and
> > blkz->capacity fields are missing and would cause a compilation error
> > when HAVE_BLK_ZONE_REP_CAPACITY is not defined:
> >
> > zone->cap = blkz->len << BDRV_SECTOR_BITS;
> > #ifdef HAVE_BLK_ZONE_REP_CAPACITY
> > /* Replace with the dedicated field on newer kernels */
> > if (rep->flags & BLK_ZONE_REP_CAPACITY) {
> > zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
> > }
> > #endif
>
> It would be a lot cleaner to do something like this:
>
> in the block common header file, add:
>
> #ifdef HAVE_BLK_ZONE_REP_CAPACITY
>
> #define BLK_ZONE_REP_CAPACITY (1 << 0)
>
> struct blk_zone_v2 {
> __u64 start; /* Zone start sector */
> __u64 len; /* Zone length in number of sectors */
> __u64 wp; /* Zone write pointer position */
> __u8 type; /* Zone type */
> __u8 cond; /* Zone condition */
> __u8 non_seq; /* Non-sequential write resources active */
> __u8 reset; /* Reset write pointer recommended */
> __u8 resv[4];
> __u64 capacity; /* Zone capacity in number of sectors */
> __u8 reserved[24];
> };
> #define blk_zone blk_zone_v2
>
> struct blk_zone_report_v2 {
> __u64 sector;
> __u32 nr_zones;
> __u32 flags;
> struct blk_zone zones[0];
> };
> #define blk_zone_report blk_zone_report_v2
>
> #endif
>
> Then the above code becomes:
>
> if (rep->flags & BLK_ZONE_REP_CAPACITY) {
> zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
> } else {
> zone->cap = blkz->len << BDRV_SECTOR_BITS;
> }
>
> No #ifdef in the C code, only in the header and that compiles and works for
> all
> host kernel versions.
This approach has a name contradiction. The struct blk_zone_report
name is also the block layer API blk_zone_report() name. Besides, why
not only use HAVE_BLK_ZONE_REP_CAPACITY? As it can indicate if struct
blk_zone has the capacity field, then we can just drop blk-common
header changes and use this in parse_zone:
zone->cap = blkz->len << BDRV_SECTOR_BITS;
#ifdef HAVE_BLK_ZONE_REP_CAPACITY
zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
#endif
Linux capacity field changes:
https://lists.infradead.org/pipermail/linux-nvme/2020-June/017889.html
>
>
> >
> >> + } else {
> >> + zone->cap = blkz->len << BDRV_SECTOR_BITS;
> >> + }
> >> +
> >> + switch (blkz->type) {
> >> + case BLK_ZONE_TYPE_SEQWRITE_REQ:
> >> + zone->type = BLK_ZT_SWR;
> >> + break;
> >> + case BLK_ZONE_TYPE_SEQWRITE_PREF:
> >> + zone->type = BLK_ZT_SWP;
> >> + break;
> >> + case BLK_ZONE_TYPE_CONVENTIONAL:
> >> + zone->type = BLK_ZT_CONV;
> >> + break;
> >> + default:
> >> + g_assert_not_reached();
> >> + }
> >> +
> >> + switch (blkz->cond) {
> >> + case BLK_ZONE_COND_NOT_WP:
> >> + zone->cond = BLK_ZS_NOT_WP;
> >> + break;
> >> + case BLK_ZONE_COND_EMPTY:
> >> + zone->cond = BLK_ZS_EMPTY;
> >> + break;
> >> + case BLK_ZONE_COND_IMP_OPEN:
> >> + zone->cond = BLK_ZS_IOPEN;
> >> + break;
> >> + case BLK_ZONE_COND_EXP_OPEN:
> >> + zone->cond = BLK_ZS_EOPEN;
> >> + break;
> >> + case BLK_ZONE_COND_CLOSED:
> >> + zone->cond = BLK_ZS_CLOSED;
> >> + break;
> >> + case BLK_ZONE_COND_READONLY:
> >> + zone->cond = BLK_ZS_RDONLY;
> >> + break;
> >> + case BLK_ZONE_COND_FULL:
> >> + zone->cond = BLK_ZS_FULL;
> >> + break;
> >> + case BLK_ZONE_COND_OFFLINE:
> >> + zone->cond = BLK_ZS_OFFLINE;
> >> + break;
> >> + default:
> >> + g_assert_not_reached();
> >> + }
> >> +}
> >> +#endif
> >> +
> >> +static int handle_aiocb_zone_report(void *opaque) {
> >> +#if defined(CONFIG_BLKZONED)
> >> + RawPosixAIOData *aiocb = opaque;
> >> + int fd = aiocb->aio_fildes;
> >> + unsigned int *nr_zones = aiocb->zone_report.nr_zones;
> >> + BlockZoneDescriptor *zones = aiocb->zone_report.zones;
> >> + /* zoned block devices use 512-byte sectors */
> >> + int64_t sector = aiocb->aio_offset / 512;
> >> +
> >> + struct blk_zone *blkz;
> >> + int64_t rep_size;
> >> + unsigned int nrz;
> >> + int ret, n = 0, i = 0;
> >> +
> >> + nrz = *nr_zones;
> >> + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct
> >> blk_zone);
> >> + g_autofree struct blk_zone_report *rep = NULL;
> >> + rep = g_malloc(rep_size);
> >> +
> >> + blkz = (struct blk_zone *)(rep + 1);
> >> + while (n < nrz) {
> >> + memset(rep, 0, rep_size);
> >> + rep->sector = sector;
> >> + rep->nr_zones = nrz - n;
> >> +
> >> + do {
> >> + ret = ioctl(fd, BLKREPORTZONE, rep);
> >> + } while (ret != 0 && errno == EINTR);
> >> + if (ret != 0) {
> >> + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed
> >> %d",
> >> + fd, sector, errno);
> >> + return -errno;
> >
> > Using errno after calling error_report() is risky because functions
> > called by error_report() may overwrite errno. It's safer to preserve
> > the value:
> >
> > if (ret != 0) {
> > ret = -errno;
> > error_report(...);
> > return ret;
> > }
> >
> >> + }
> >> +
> >> + if (!rep->nr_zones) {
> >> + break;
> >> + }
> >> +
> >> + for (i = 0; i < rep->nr_zones; i++, n++) {
> >> + parse_zone(&zones[n], &blkz[i], rep);
> >> + /* The next report should start after the last zone reported
> >> */
> >> + sector = blkz[i].start + blkz[i].len;
> >> + }
> >> + }
> >> +
> >> + *nr_zones = n;
> >> + return 0;
> >> +#else
> >> + return -ENOTSUP;
> >> +#endif
> >> +}
> >> +
> >> +static int handle_aiocb_zone_mgmt(void *opaque) {
> >> +#if defined(CONFIG_BLKZONED)
> >> + RawPosixAIOData *aiocb = opaque;
> >> + int fd = aiocb->aio_fildes;
> >> + int64_t sector = aiocb->aio_offset / 512;
> >> + int64_t nr_sectors = aiocb->aio_nbytes / 512;
> >> + struct blk_zone_range range;
> >> + int ret;
> >> +
> >> + /* Execute the operation */
> >> + range.sector = sector;
> >> + range.nr_sectors = nr_sectors;
> >> + do {
> >> + ret = ioctl(fd, aiocb->zone_mgmt.zone_op, &range);
> >> + } while (ret != 0 && errno == EINTR);
> >> +
> >> + if (ret != 0) {
> >> + error_report("ioctl %s failed %d", aiocb->zone_mgmt.zone_op_name,
> >> + errno);
> >> + return -errno;
> >
> > Same errno value preservation thing here.
> >
> >> + }
> >> + return ret;
> >> +#else
> >> + return -ENOTSUP;
> >> +#endif
> >> +}
> >> +
> >> static int handle_aiocb_copy_range(void *opaque)
> >> {
> >> RawPosixAIOData *aiocb = opaque;
> >> @@ -3022,6 +3210,105 @@ static void raw_account_discard(BDRVRawState *s,
> >> uint64_t nbytes, int ret)
> >> }
> >> }
> >>
> >> +/*
> >> + * zone report - Get a zone block device's information in the form
> >> + * of an array of zone descriptors.
> >> + * zones is an array of zone descriptors to hold zone information on
> >> reply;
> >> + * offset can be any byte within the entire size of the device;
> >> + * nr_zones is the maxium number of sectors the command should operate on.
> >> + */
> >> +static int coroutine_fn raw_co_zone_report(BlockDriverState *bs, int64_t
> >> offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones) {
> >> +#if defined(CONFIG_BLKZONED)
> >> + BDRVRawState *s = bs->opaque;
> >> + RawPosixAIOData acb;
> >> +
> >> + acb = (RawPosixAIOData) {
> >> + .bs = bs,
> >> + .aio_fildes = s->fd,
> >> + .aio_type = QEMU_AIO_ZONE_REPORT,
> >> + .aio_offset = offset,
> >> + .zone_report = {
> >> + .nr_zones = nr_zones,
> >> + .zones = zones,
> >> + },
> >> + };
> >> +
> >> + return raw_thread_pool_submit(bs, handle_aiocb_zone_report, &acb);
> >> +#else
> >> + return -ENOTSUP;
> >> +#endif
> >> +}
> >> +
> >> +/*
> >> + * zone management operations - Execute an operation on a zone
> >> + */
> >> +static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs,
> >> BlockZoneOp op,
> >> + int64_t offset, int64_t len) {
> >> +#if defined(CONFIG_BLKZONED)
> >> + BDRVRawState *s = bs->opaque;
> >> + RawPosixAIOData acb;
> >> + int64_t zone_size, zone_size_mask;
> >> + const char *zone_op_name;
> >> + unsigned long zone_op;
> >> + bool is_all = false;
> >> +
> >> + zone_size = bs->bl.zone_size;
> >> + zone_size_mask = zone_size - 1;
> >> + if (offset & zone_size_mask) {
> >> + error_report("sector offset %" PRId64 " is not aligned to zone
> >> size "
> >> + "%" PRId64 "", offset / 512, zone_size / 512);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (((offset + len) < bs->bl.capacity && len & zone_size_mask) ||
> >> + offset + len > bs->bl.capacity) {
> >> + error_report("number of sectors %" PRId64 " is not aligned to
> >> zone size"
> >> + " %" PRId64 "", len / 512, zone_size / 512);
> >> + return -EINVAL;
> >> + }
> >> +
> >> + switch (op) {
> >> + case BLK_ZO_OPEN:
> >> + zone_op_name = "BLKOPENZONE";
> >> + zone_op = BLKOPENZONE;
> >> + break;
> >> + case BLK_ZO_CLOSE:
> >> + zone_op_name = "BLKCLOSEZONE";
> >> + zone_op = BLKCLOSEZONE;
> >> + break;
> >> + case BLK_ZO_FINISH:
> >> + zone_op_name = "BLKFINISHZONE";
> >> + zone_op = BLKFINISHZONE;
> >> + break;
> >> + case BLK_ZO_RESET:
> >> + zone_op_name = "BLKRESETZONE";
> >> + zone_op = BLKRESETZONE;
> >> + break;
> >> + default:
> >> + g_assert_not_reached();
> >> + }
> >> +
> >> + acb = (RawPosixAIOData) {
> >> + .bs = bs,
> >> + .aio_fildes = s->fd,
> >> + .aio_type = QEMU_AIO_ZONE_MGMT,
> >> + .aio_offset = offset,
> >> + .aio_nbytes = len,
> >> + .zone_mgmt = {
> >> + .zone_op = zone_op,
> >> + .zone_op_name = zone_op_name,
> >> + .all = is_all,
> >> + },
> >> + };
> >> +
> >> + return raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb);
> >> +#else
> >> + return -ENOTSUP;
> >> +#endif
> >> +}
> >> +
> >> static coroutine_fn int
> >> raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes,
> >> bool blkdev)
> >> @@ -3752,6 +4039,54 @@ static BlockDriver bdrv_host_device = {
> >> #endif
> >> };
> >>
> >> +#if defined(CONFIG_BLKZONED)
> >
> > Have you tried building without CONFIG_BLKZONED? There might be "unused
> > function" compiler warnings because raw_co_zone_mgmt() won't be
> > referenced by anything if BlockDriver bdrv_zoned_host_device isn't
> > compiled in.
> >
> > It may be necessary to completely #ifdef out raw_co_zone_mgmt() and
> > related functions instead of #else return -ENOTSUP.
> >
> >> +static BlockDriver bdrv_zoned_host_device = {
> >> + .format_name = "zoned_host_device",
> >> + .protocol_name = "zoned_host_device",
> >> + .instance_size = sizeof(BDRVRawState),
> >> + .bdrv_needs_filename = true,
> >> + .bdrv_probe_device = hdev_probe_device,
> >> + .bdrv_file_open = hdev_open,
> >> + .bdrv_close = raw_close,
> >> + .bdrv_reopen_prepare = raw_reopen_prepare,
> >> + .bdrv_reopen_commit = raw_reopen_commit,
> >> + .bdrv_reopen_abort = raw_reopen_abort,
> >> + .bdrv_co_create_opts = bdrv_co_create_opts_simple,
> >> + .create_opts = &bdrv_create_opts_simple,
> >> + .mutable_opts = mutable_opts,
> >> + .bdrv_co_invalidate_cache = raw_co_invalidate_cache,
> >> + .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
> >> +
> >> + .bdrv_co_preadv = raw_co_preadv,
> >> + .bdrv_co_pwritev = raw_co_pwritev,
> >> + .bdrv_co_flush_to_disk = raw_co_flush_to_disk,
> >> + .bdrv_co_pdiscard = hdev_co_pdiscard,
> >> + .bdrv_co_copy_range_from = raw_co_copy_range_from,
> >> + .bdrv_co_copy_range_to = raw_co_copy_range_to,
> >> + .bdrv_refresh_limits = raw_refresh_limits,
> >> + .bdrv_io_plug = raw_aio_plug,
> >> + .bdrv_io_unplug = raw_aio_unplug,
> >> + .bdrv_attach_aio_context = raw_aio_attach_aio_context,
> >> +
> >> + .bdrv_co_truncate = raw_co_truncate,
> >> + .bdrv_getlength = raw_getlength,
> >> + .bdrv_get_info = raw_get_info,
> >> + .bdrv_get_allocated_file_size
> >> + = raw_get_allocated_file_size,
> >> + .bdrv_get_specific_stats = hdev_get_specific_stats,
> >> + .bdrv_check_perm = raw_check_perm,
> >> + .bdrv_set_perm = raw_set_perm,
> >> + .bdrv_abort_perm_update = raw_abort_perm_update,
> >> + .bdrv_probe_blocksizes = hdev_probe_blocksizes,
> >> + .bdrv_probe_geometry = hdev_probe_geometry,
> >> + .bdrv_co_ioctl = hdev_co_ioctl,
> >> +
> >> + /* zone management operations */
> >> + .bdrv_co_zone_report = raw_co_zone_report,
> >> + .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
> >> +};
> >> +#endif
> >> +
> >> #if defined(__linux__) || defined(__FreeBSD__) ||
> >> defined(__FreeBSD_kernel__)
> >> static void cdrom_parse_filename(const char *filename, QDict *options,
> >> Error **errp)
> >> @@ -4012,6 +4347,9 @@ static void bdrv_file_init(void)
> >> bdrv_register(&bdrv_file);
> >> #if defined(HAVE_HOST_BLOCK_DEVICE)
> >> bdrv_register(&bdrv_host_device);
> >> +#if defined(CONFIG_BLKZONED)
> >> + bdrv_register(&bdrv_zoned_host_device);
> >> +#endif
> >> #ifdef __linux__
> >> bdrv_register(&bdrv_host_cdrom);
> >> #endif
> >> diff --git a/block/io.c b/block/io.c
> >> index 0a8cbefe86..5ab2d169c8 100644
> >> --- a/block/io.c
> >> +++ b/block/io.c
> >> @@ -3198,6 +3198,47 @@ out:
> >> return co.ret;
> >> }
> >>
> >> +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones)
> >> +{
> >> + BlockDriver *drv = bs->drv;
> >> + CoroutineIOCompletion co = {
> >> + .coroutine = qemu_coroutine_self(),
> >> + };
> >> + IO_CODE();
> >> +
> >> + bdrv_inc_in_flight(bs);
> >> + if (!drv || !drv->bdrv_co_zone_report) {
> >> + co.ret = -ENOTSUP;
> >> + goto out;
> >> + }
> >> + co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
> >> +out:
> >> + bdrv_dec_in_flight(bs);
> >> + return co.ret;
> >> +}
> >> +
> >> +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> >> + int64_t offset, int64_t len)
> >> +{
> >> + BlockDriver *drv = bs->drv;
> >> + CoroutineIOCompletion co = {
> >> + .coroutine = qemu_coroutine_self(),
> >> + };
> >> + IO_CODE();
> >> +
> >> + bdrv_inc_in_flight(bs);
> >> + if (!drv || !drv->bdrv_co_zone_mgmt) {
> >> + co.ret = -ENOTSUP;
> >> + goto out;
> >> + }
> >> + co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
> >> +out:
> >> + bdrv_dec_in_flight(bs);
> >> + return co.ret;
> >> +}
> >> +
> >> void *qemu_blockalign(BlockDriverState *bs, size_t size)
> >> {
> >> IO_CODE();
> >> diff --git a/include/block/block-common.h b/include/block/block-common.h
> >> index 36bd0e480e..8efb6b0c43 100644
> >> --- a/include/block/block-common.h
> >> +++ b/include/block/block-common.h
> >> @@ -49,6 +49,10 @@ typedef struct BlockDriver BlockDriver;
> >> typedef struct BdrvChild BdrvChild;
> >> typedef struct BdrvChildClass BdrvChildClass;
> >>
> >> +#ifndef HAVE_BLK_ZONE_REP_CAPACITY
> >> +#define BLK_ZONE_REP_CAPACITY (1 << 0)
> >> +#endif
> >
> > This constant is defined in <linux/blkzoned.h> and shouldn't be
> > redefined by QEMU. I think this was necessary because of the #ifdefs.
> > Please see my comment above about HAVE_BLK_ZONE_REP_CAPACITY.
> >
> >> +
> >> typedef enum BlockZoneOp {
> >> BLK_ZO_OPEN,
> >> BLK_ZO_CLOSE,
> >> diff --git a/include/block/block-io.h b/include/block/block-io.h
> >> index fd25ffa9be..65463b88d9 100644
> >> --- a/include/block/block-io.h
> >> +++ b/include/block/block-io.h
> >> @@ -88,6 +88,13 @@ int bdrv_co_ioctl(BlockDriverState *bs, int req, void
> >> *buf);
> >> /* Ensure contents are flushed to disk. */
> >> int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
> >>
> >> +/* Report zone information of zone block device. */
> >> +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones);
> >> +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> >> + int64_t offset, int64_t len);
> >> +
> >> int bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int64_t bytes);
> >> bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
> >> int bdrv_block_status(BlockDriverState *bs, int64_t offset,
> >> diff --git a/include/block/block_int-common.h
> >> b/include/block/block_int-common.h
> >> index 7f7863cc9e..cdc06e77a6 100644
> >> --- a/include/block/block_int-common.h
> >> +++ b/include/block/block_int-common.h
> >> @@ -691,6 +691,12 @@ struct BlockDriver {
> >> QEMUIOVector *qiov,
> >> int64_t pos);
> >>
> >> + int coroutine_fn (*bdrv_co_zone_report)(BlockDriverState *bs,
> >> + int64_t offset, unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones);
> >> + int coroutine_fn (*bdrv_co_zone_mgmt)(BlockDriverState *bs,
> >> BlockZoneOp op,
> >> + int64_t offset, int64_t len);
> >> +
> >> /* removable device specific */
> >> bool (*bdrv_is_inserted)(BlockDriverState *bs);
> >> void (*bdrv_eject)(BlockDriverState *bs, bool eject_flag);
> >> @@ -828,6 +834,24 @@ typedef struct BlockLimits {
> >>
> >> /* device zone model */
> >> BlockZoneModel zoned;
> >> +
> >> + /* zone size expressed in bytes */
> >> + uint32_t zone_size;
> >> +
> >> + /* total number of zones */
> >> + unsigned int nr_zones;
> >> +
> >> + /* maximum sectors of a zone append write operation */
> >> + int64_t max_append_sectors;
> >> +
> >> + /* maximum number of open zones */
> >> + int64_t max_open_zones;
> >> +
> >> + /* maximum number of active zones */
> >> + int64_t max_active_zones;
> >> +
> >> + /* device capacity expressed in bytes */
> >> + int64_t capacity;
> >> } BlockLimits;
> >>
> >> typedef struct BdrvOpBlocker BdrvOpBlocker;
> >> diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
> >> index 21fc10c4c9..3d26929cdd 100644
> >> --- a/include/block/raw-aio.h
> >> +++ b/include/block/raw-aio.h
> >> @@ -29,6 +29,8 @@
> >> #define QEMU_AIO_WRITE_ZEROES 0x0020
> >> #define QEMU_AIO_COPY_RANGE 0x0040
> >> #define QEMU_AIO_TRUNCATE 0x0080
> >> +#define QEMU_AIO_ZONE_REPORT 0x0100
> >> +#define QEMU_AIO_ZONE_MGMT 0x0200
> >> #define QEMU_AIO_TYPE_MASK \
> >> (QEMU_AIO_READ | \
> >> QEMU_AIO_WRITE | \
> >> @@ -37,7 +39,9 @@
> >> QEMU_AIO_DISCARD | \
> >> QEMU_AIO_WRITE_ZEROES | \
> >> QEMU_AIO_COPY_RANGE | \
> >> - QEMU_AIO_TRUNCATE)
> >> + QEMU_AIO_TRUNCATE | \
> >> + QEMU_AIO_ZONE_REPORT | \
> >> + QEMU_AIO_ZONE_MGMT)
> >>
> >> /* AIO flags */
> >> #define QEMU_AIO_MISALIGNED 0x1000
> >> diff --git a/include/sysemu/block-backend-io.h
> >> b/include/sysemu/block-backend-io.h
> >> index 50f5aa2e07..6835525582 100644
> >> --- a/include/sysemu/block-backend-io.h
> >> +++ b/include/sysemu/block-backend-io.h
> >> @@ -45,6 +45,12 @@ BlockAIOCB *blk_aio_pwritev(BlockBackend *blk, int64_t
> >> offset,
> >> BlockCompletionFunc *cb, void *opaque);
> >> BlockAIOCB *blk_aio_flush(BlockBackend *blk,
> >> BlockCompletionFunc *cb, void *opaque);
> >> +BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
> >> + unsigned int *nr_zones,
> >> BlockZoneDescriptor *zones,
> >> + BlockCompletionFunc *cb, void *opaque);
> >> +BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> >> + int64_t offset, int64_t len,
> >> + BlockCompletionFunc *cb, void *opaque);
> >> BlockAIOCB *blk_aio_pdiscard(BlockBackend *blk, int64_t offset, int64_t
> >> bytes,
> >> BlockCompletionFunc *cb, void *opaque);
> >> void blk_aio_cancel_async(BlockAIOCB *acb);
> >> @@ -156,6 +162,17 @@ int generated_co_wrapper
> >> blk_pwrite_zeroes(BlockBackend *blk, int64_t offset,
> >> int coroutine_fn blk_co_pwrite_zeroes(BlockBackend *blk, int64_t offset,
> >> int64_t bytes, BdrvRequestFlags
> >> flags);
> >>
> >> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones);
> >> +int generated_co_wrapper blk_zone_report(BlockBackend *blk, int64_t
> >> offset,
> >> + unsigned int *nr_zones,
> >> + BlockZoneDescriptor *zones);
> >> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> >> + int64_t offset, int64_t len);
> >> +int generated_co_wrapper blk_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> >> + int64_t offset, int64_t len);
> >> +
> >> int generated_co_wrapper blk_pdiscard(BlockBackend *blk, int64_t offset,
> >> int64_t bytes);
> >> int coroutine_fn blk_co_pdiscard(BlockBackend *blk, int64_t offset,
> >> diff --git a/meson.build b/meson.build
> >> index 63cfb844cf..9a797388ad 100644
> >> --- a/meson.build
> >> +++ b/meson.build
> >> @@ -1882,6 +1882,7 @@ config_host_data.set('CONFIG_REPLICATION',
> >> get_option('replication').allowed())
> >> # has_header
> >> config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
> >> config_host_data.set('CONFIG_LINUX_MAGIC_H',
> >> cc.has_header('linux/magic.h'))
> >> +config_host_data.set('CONFIG_BLKZONED', cc.has_header('linux/blkzoned.h'))
> >> config_host_data.set('CONFIG_VALGRIND_H',
> >> cc.has_header('valgrind/valgrind.h'))
> >> config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))
> >> config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h'))
> >> @@ -1975,6 +1976,9 @@ config_host_data.set('HAVE_SIGEV_NOTIFY_THREAD_ID',
> >> config_host_data.set('HAVE_STRUCT_STAT_ST_ATIM',
> >> cc.has_member('struct stat', 'st_atim',
> >> prefix: '#include <sys/stat.h>'))
> >> +config_host_data.set('HAVE_BLK_ZONE_REP_CAPACITY',
> >> + cc.has_member('struct blk_zone', 'capacity',
> >> + prefix: '#include <linux/blkzoned.h>'))
> >>
> >> # has_type
> >> config_host_data.set('CONFIG_IOVEC',
> >> diff --git a/qapi/block-core.json b/qapi/block-core.json
> >> index f21fa235f2..ee87c1df8a 100644
> >> --- a/qapi/block-core.json
> >> +++ b/qapi/block-core.json
> >> @@ -2942,6 +2942,7 @@
> >> # @compress: Since 5.0
> >> # @copy-before-write: Since 6.2
> >> # @snapshot-access: Since 7.0
> >> +# @zoned_host_device: Since 7.2
> >> #
> >> # Since: 2.9
> >> ##
> >> @@ -2955,7 +2956,8 @@
> >> 'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme',
> >> 'parallels',
> >> 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
> >> { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
> >> - 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
> >> + 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat',
> >> + { 'name': 'zoned_host_device', 'if': 'CONFIG_BLKZONED' } ] }
> >>
> >> ##
> >> # @BlockdevOptionsFile:
> >> @@ -4329,7 +4331,9 @@
> >> 'vhdx': 'BlockdevOptionsGenericFormat',
> >> 'vmdk': 'BlockdevOptionsGenericCOWFormat',
> >> 'vpc': 'BlockdevOptionsGenericFormat',
> >> - 'vvfat': 'BlockdevOptionsVVFAT'
> >> + 'vvfat': 'BlockdevOptionsVVFAT',
> >> + 'zoned_host_device': { 'type': 'BlockdevOptionsFile',
> >> + 'if': 'CONFIG_BLKZONED' }
> >> } }
> >>
> >> ##
> >> diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
> >> index 952dc940f1..e56c8d1c30 100644
> >> --- a/qemu-io-cmds.c
> >> +++ b/qemu-io-cmds.c
> >> @@ -1712,6 +1712,149 @@ static const cmdinfo_t flush_cmd = {
> >> .oneline = "flush all in-core file state to disk",
> >> };
> >>
> >> +static inline int64_t tosector(int64_t bytes) {
> >> + return bytes >> BDRV_SECTOR_BITS;
> >> +}
> >> +
> >> +static int zone_report_f(BlockBackend *blk, int argc, char **argv)
> >> +{
> >> + int ret;
> >> + int64_t offset;
> >> + unsigned int nr_zones;
> >> +
> >> + ++optind;
> >> + offset = cvtnum(argv[optind]);
> >> + ++optind;
> >> + nr_zones = cvtnum(argv[optind]);
> >> +
> >> + g_autofree BlockZoneDescriptor *zones = NULL;
> >> + zones = g_new(BlockZoneDescriptor, nr_zones);
> >> + ret = blk_zone_report(blk, offset, &nr_zones, zones);
> >> + if (ret < 0) {
> >> + printf("zone report failed: %s\n", strerror(-ret));
> >> + } else {
> >> + for (int i = 0; i < nr_zones; ++i) {
> >> + printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
> >> + "cap"" 0x%" PRIx64 ", wptr 0x%" PRIx64 ", "
> >> + "zcond:%u, [type: %u]\n",
> >> + tosector(zones[i].start), tosector(zones[i].length),
> >> + tosector(zones[i].cap), tosector(zones[i].wp),
> >> + zones[i].cond, zones[i].type);
> >> + }
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static const cmdinfo_t zone_report_cmd = {
> >> + .name = "zone_report",
> >> + .altname = "zrp",
> >> + .cfunc = zone_report_f,
> >> + .argmin = 2,
> >> + .argmax = 2,
> >> + .args = "offset number",
> >> + .oneline = "report zone information",
> >> +};
> >> +
> >> +static int zone_open_f(BlockBackend *blk, int argc, char **argv)
> >> +{
> >> + int ret;
> >> + int64_t offset, len;
> >> + ++optind;
> >> + offset = cvtnum(argv[optind]);
> >> + ++optind;
> >> + len = cvtnum(argv[optind]);
> >> + ret = blk_zone_mgmt(blk, BLK_ZO_OPEN, offset, len);
> >> + if (ret < 0) {
> >> + printf("zone open failed: %s\n", strerror(-ret));
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static const cmdinfo_t zone_open_cmd = {
> >> + .name = "zone_open",
> >> + .altname = "zo",
> >> + .cfunc = zone_open_f,
> >> + .argmin = 2,
> >> + .argmax = 2,
> >> + .args = "offset len",
> >> + .oneline = "explicit open a range of zones in zone block device",
> >> +};
> >> +
> >> +static int zone_close_f(BlockBackend *blk, int argc, char **argv)
> >> +{
> >> + int ret;
> >> + int64_t offset, len;
> >> + ++optind;
> >> + offset = cvtnum(argv[optind]);
> >> + ++optind;
> >> + len = cvtnum(argv[optind]);
> >> + ret = blk_zone_mgmt(blk, BLK_ZO_CLOSE, offset, len);
> >> + if (ret < 0) {
> >> + printf("zone close failed: %s\n", strerror(-ret));
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static const cmdinfo_t zone_close_cmd = {
> >> + .name = "zone_close",
> >> + .altname = "zc",
> >> + .cfunc = zone_close_f,
> >> + .argmin = 2,
> >> + .argmax = 2,
> >> + .args = "offset len",
> >> + .oneline = "close a range of zones in zone block device",
> >> +};
> >> +
> >> +static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
> >> +{
> >> + int ret;
> >> + int64_t offset, len;
> >> + ++optind;
> >> + offset = cvtnum(argv[optind]);
> >> + ++optind;
> >> + len = cvtnum(argv[optind]);
> >> + ret = blk_zone_mgmt(blk, BLK_ZO_FINISH, offset, len);
> >> + if (ret < 0) {
> >> + printf("zone finish failed: %s\n", strerror(-ret));
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static const cmdinfo_t zone_finish_cmd = {
> >> + .name = "zone_finish",
> >> + .altname = "zf",
> >> + .cfunc = zone_finish_f,
> >> + .argmin = 2,
> >> + .argmax = 2,
> >> + .args = "offset len",
> >> + .oneline = "finish a range of zones in zone block device",
> >> +};
> >> +
> >> +static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
> >> +{
> >> + int ret;
> >> + int64_t offset, len;
> >> + ++optind;
> >> + offset = cvtnum(argv[optind]);
> >> + ++optind;
> >> + len = cvtnum(argv[optind]);
> >> + ret = blk_zone_mgmt(blk, BLK_ZO_RESET, offset, len);
> >> + if (ret < 0) {
> >> + printf("zone reset failed: %s\n", strerror(-ret));
> >> + }
> >> + return ret;
> >> +}
> >> +
> >> +static const cmdinfo_t zone_reset_cmd = {
> >> + .name = "zone_reset",
> >> + .altname = "zrs",
> >> + .cfunc = zone_reset_f,
> >> + .argmin = 2,
> >> + .argmax = 2,
> >> + .args = "offset len",
> >> + .oneline = "reset a zone write pointer in zone block device",
> >> +};
> >> +
> >> static int truncate_f(BlockBackend *blk, int argc, char **argv);
> >> static const cmdinfo_t truncate_cmd = {
> >> .name = "truncate",
> >> @@ -2504,6 +2647,11 @@ static void __attribute((constructor))
> >> init_qemuio_commands(void)
> >> qemuio_add_command(&aio_write_cmd);
> >> qemuio_add_command(&aio_flush_cmd);
> >> qemuio_add_command(&flush_cmd);
> >> + qemuio_add_command(&zone_report_cmd);
> >> + qemuio_add_command(&zone_open_cmd);
> >> + qemuio_add_command(&zone_close_cmd);
> >> + qemuio_add_command(&zone_finish_cmd);
> >> + qemuio_add_command(&zone_reset_cmd);
> >> qemuio_add_command(&truncate_cmd);
> >> qemuio_add_command(&length_cmd);
> >> qemuio_add_command(&info_cmd);
> >> --
> >> 2.37.3
> >>
>
> --
> Damien Le Moal
> Western Digital Research
>
>