[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 04/19] cpu: call cpu_synchronize_post_init() fro
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH 04/19] cpu: call cpu_synchronize_post_init() from CPUClass.realize() if hotplugged |
Date: |
Fri, 12 Apr 2013 13:34:09 +0200 |
On Thu, 11 Apr 2013 15:33:01 -0300
Eduardo Habkost <address@hidden> wrote:
> On Thu, Apr 11, 2013 at 04:51:43PM +0200, Igor Mammedov wrote:
> > ... to synchronize CPU state to KVM
> >
> > Signed-off-by: Igor Mammedov <address@hidden>
> > ---
> > v2:
> > * linking kvm-stub.o to *-user target moved in separate patch
> > ---
> > include/sysemu/kvm.h | 18 ++++++++++--------
> > kvm-all.c | 1 +
> > kvm-stub.c | 1 +
> > qom/cpu.c | 4 ++++
> > vl.c | 1 -
> > 5 files changed, 16 insertions(+), 9 deletions(-)
> >
> > diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
> > index 93cef28..8fb2489 100644
> > --- a/include/sysemu/kvm.h
> > +++ b/include/sysemu/kvm.h
> > @@ -250,8 +250,6 @@ int kvm_check_extension(KVMState *s, unsigned int
> > extension);
> > uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
> > uint32_t index, int reg);
> > void kvm_cpu_synchronize_state(CPUArchState *env);
> > -void kvm_cpu_synchronize_post_reset(CPUState *cpu);
> > -void kvm_cpu_synchronize_post_init(CPUState *cpu);
> >
> > /* generic hooks - to be moved/refactored once there are more users */
> >
> > @@ -262,6 +260,16 @@ static inline void cpu_synchronize_state(CPUArchState
> > *env)
> > }
> > }
> >
> > +#if !defined(CONFIG_USER_ONLY)
> > +int kvm_physical_memory_addr_from_host(KVMState *s, void *ram_addr,
> > + hwaddr *phys_addr);
> > +#endif
> > +
> > +#endif /* NEED_CPU_H */
> > +
> > +void kvm_cpu_synchronize_post_reset(CPUState *cpu);
> > +void kvm_cpu_synchronize_post_init(CPUState *cpu);
> > +
> > static inline void cpu_synchronize_post_reset(CPUState *cpu)
> > {
> > if (kvm_enabled()) {
> > @@ -277,12 +285,6 @@ static inline void cpu_synchronize_post_init(CPUState
> > *cpu)
> > }
> >
> >
> > -#if !defined(CONFIG_USER_ONLY)
> > -int kvm_physical_memory_addr_from_host(KVMState *s, void *ram_addr,
> > - hwaddr *phys_addr);
> > -#endif
> > -
> > -#endif
> > int kvm_set_ioeventfd_mmio(int fd, uint32_t adr, uint32_t val, bool assign,
> > uint32_t size);
> >
> > diff --git a/kvm-all.c b/kvm-all.c
> > index fc4e17c..1d17128 100644
> > --- a/kvm-all.c
> > +++ b/kvm-all.c
> > @@ -109,6 +109,7 @@ bool kvm_async_interrupts_allowed;
> > bool kvm_irqfds_allowed;
> > bool kvm_msi_via_irqfd_allowed;
> > bool kvm_gsi_routing_allowed;
> > +bool kvm_allowed;
> >
> > static const KVMCapabilityInfo kvm_required_capabilites[] = {
> > KVM_CAP_INFO(USER_MEMORY),
> > diff --git a/kvm-stub.c b/kvm-stub.c
> > index b34064a..8cb81c4 100644
> > --- a/kvm-stub.c
> > +++ b/kvm-stub.c
> > @@ -23,6 +23,7 @@ bool kvm_async_interrupts_allowed;
> > bool kvm_irqfds_allowed;
> > bool kvm_msi_via_irqfd_allowed;
> > bool kvm_gsi_routing_allowed;
> > +bool kvm_allowed;
> >
> > int kvm_init_vcpu(CPUState *cpu)
> > {
> > diff --git a/qom/cpu.c b/qom/cpu.c
> > index e242dcb..0c76712 100644
> > --- a/qom/cpu.c
> > +++ b/qom/cpu.c
> > @@ -20,6 +20,7 @@
> >
> > #include "qom/cpu.h"
> > #include "qemu-common.h"
> > +#include "sysemu/kvm.h"
> >
> > void cpu_reset_interrupt(CPUState *cpu, int mask)
> > {
> > @@ -57,6 +58,9 @@ static ObjectClass *cpu_common_class_by_name(const char
> > *cpu_model)
> >
> > static void cpu_common_realizefn(DeviceState *dev, Error **errp)
> > {
> > + if (dev->hotplugged) {
> > + cpu_synchronize_post_init(CPU(dev));
> > + }
>
> For reference: non-hotplugged CPUs have cpu_synchronize_post_init()
> called from cpu_synchronize_all_post_init(), that is called from main(),
> just after the machine->init() call.
>
> That said, have you considered changing the code so that's possible to
> call cpu_synchronize_post_init() for all CPUs, so we could kill the
> cpu_synchronize_all_post_init() call entirely?
>
> Maybe the solution for this is to realize non-hotplugged CPUs later,
> instead of realizing them very early inside the machine init function.
> If doing is not possible or not enough, we could use VM state notifiers
> to watch for the right moment to call cpu_synchronize_post_init().
I have not considered it, since question is out of scope CPU hot-plug.
It might be feasible to do so later in separate patch and remove
"if (dev->hotplugged)" condition tough.
I think it will be more appropriate when machine will QOM-ified, then
to make machine.realize() work it had to be done, but now I don't see
any gain doing so (providing all the trouble it might cause).
>
> > }
> >
> > static void cpu_class_init(ObjectClass *klass, void *data)
> > diff --git a/vl.c b/vl.c
> > index d694a90..21952c3 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -267,7 +267,6 @@ static NotifierList machine_init_done_notifiers =
> > NOTIFIER_LIST_INITIALIZER(machine_init_done_notifiers);
> >
> > static bool tcg_allowed = true;
> > -bool kvm_allowed;
> > bool xen_allowed;
> > uint32_t xen_domid;
> > enum xen_mode xen_mode = XEN_EMULATE;
> > --
> > 1.8.2
> >
>
> --
> Eduardo
--
Regards,
Igor
- Re: [Qemu-devel] [PATCH 11/19] target-i386: introduce apic-id property, (continued)
[Qemu-devel] [PATCH 17/19] qdev: set device's parent before calling realize() down inheritance chain., Igor Mammedov, 2013/04/11
[Qemu-devel] [PATCH 14/19] target-i386: replace MSI_SPACE_SIZE with APIC_SPACE_SIZE, Igor Mammedov, 2013/04/11
[Qemu-devel] [PATCH 04/19] cpu: call cpu_synchronize_post_init() from CPUClass.realize() if hotplugged, Igor Mammedov, 2013/04/11
Re: [Qemu-devel] [PATCH 04/19] cpu: call cpu_synchronize_post_init() from CPUClass.realize() if hotplugged, Eduardo Habkost, 2013/04/15
[Qemu-devel] [PATCH 15/19] target-i386: move APIC to ICC bus, Igor Mammedov, 2013/04/11
[Qemu-devel] [PATCH 13/19] target-i386: cpu: attach ICC bus to CPU on its creation, Igor Mammedov, 2013/04/11
[Qemu-devel] [PATCH 05/19] cpu: resume CPU from CPUClass.cpu_common_realizefn() when it is hot-plugged, Igor Mammedov, 2013/04/11