qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [kvm-unit-tests PATCH v13 3/4] arm: pmu: Check cycle count


From: Wei Huang
Subject: [Qemu-devel] [kvm-unit-tests PATCH v13 3/4] arm: pmu: Check cycle count increases
Date: Wed, 30 Nov 2016 23:16:41 -0600

From: Christopher Covington <address@hidden>

Ensure that reads of the PMCCNTR_EL0 are monotonically increasing,
even for the smallest delta of two subsequent reads.

Signed-off-by: Christopher Covington <address@hidden>
Signed-off-by: Wei Huang <address@hidden>
Reviewed-by: Andrew Jones <address@hidden>
---
 arm/pmu.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arm/pmu.c b/arm/pmu.c
index 1fe2b1a..3566a27 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -16,6 +16,9 @@
 #include "asm/barrier.h"
 #include "asm/processor.h"
 
+#define PMU_PMCR_E         (1 << 0)
+#define PMU_PMCR_C         (1 << 2)
+#define PMU_PMCR_LC        (1 << 6)
 #define PMU_PMCR_N_SHIFT   11
 #define PMU_PMCR_N_MASK    0x1f
 #define PMU_PMCR_ID_SHIFT  16
@@ -23,10 +26,57 @@
 #define PMU_PMCR_IMP_SHIFT 24
 #define PMU_PMCR_IMP_MASK  0xff
 
+#define ID_DFR0_PERFMON_SHIFT 24
+#define ID_DFR0_PERFMON_MASK  0xf
+
+#define PMU_CYCLE_IDX         31
+
+#define NR_SAMPLES 10
+
+static unsigned int pmu_version;
 #if defined(__arm__)
 DEFINE_GET_SYSREG32(pmcr, 0, c9, c12, 0)
+DEFINE_SET_SYSREG32(pmcr, 0, c9, c12, 0)
+DEFINE_GET_SYSREG32(id_dfr0, 0, c0, c1, 2)
+DEFINE_SET_SYSREG32(pmselr, 0, c9, c12, 5)
+DEFINE_SET_SYSREG32(pmxevtyper, 0, c9, c13, 1)
+DEFINE_GET_SYSREG32(pmccntr32, 0, c9, c13, 0)
+DEFINE_SET_SYSREG32(pmccntr32, 0, c9, c13, 0)
+DEFINE_GET_SYSREG64(pmccntr64, 0, c9)
+DEFINE_SET_SYSREG64(pmccntr64, 0, c9)
+DEFINE_SET_SYSREG32(pmcntenset, 0, c9, c12, 1)
+
+static inline uint64_t get_pmccntr(void)
+{
+       if (pmu_version == 0x3)
+               return get_pmccntr64();
+       else
+               return get_pmccntr32();
+}
+
+static inline void set_pmccntr(uint64_t value)
+{
+       if (pmu_version == 0x3)
+               set_pmccntr64(value);
+       else
+               set_pmccntr32(value & 0xffffffff);
+}
+
+/* PMCCFILTR is an obsolete name for PMXEVTYPER31 in ARMv7 */
+static inline void set_pmccfiltr(uint32_t value)
+{
+       set_pmselr(PMU_CYCLE_IDX);
+       set_pmxevtyper(value);
+       isb();
+}
 #elif defined(__aarch64__)
 DEFINE_GET_SYSREG32(pmcr, el0)
+DEFINE_SET_SYSREG32(pmcr, el0)
+DEFINE_GET_SYSREG32(id_dfr0, el1)
+DEFINE_GET_SYSREG64(pmccntr, el0);
+DEFINE_SET_SYSREG64(pmccntr, el0);
+DEFINE_SET_SYSREG32(pmcntenset, el0);
+DEFINE_SET_SYSREG32(pmccfiltr, el0);
 #endif
 
 /*
@@ -52,11 +102,55 @@ static bool check_pmcr(void)
        return ((pmcr >> PMU_PMCR_IMP_SHIFT) & PMU_PMCR_IMP_MASK) != 0;
 }
 
+/*
+ * Ensure that the cycle counter progresses between back-to-back reads.
+ */
+static bool check_cycles_increase(void)
+{
+       bool success = true;
+
+       /* init before event access, this test only cares about cycle count */
+       set_pmcntenset(1 << PMU_CYCLE_IDX);
+       set_pmccfiltr(0); /* count cycles in EL0, EL1, but not EL2 */
+       set_pmccntr(0);
+
+       set_pmcr(get_pmcr() | PMU_PMCR_LC | PMU_PMCR_C | PMU_PMCR_E);
+
+       for (int i = 0; i < NR_SAMPLES; i++) {
+               uint64_t a, b;
+
+               a = get_pmccntr();
+               b = get_pmccntr();
+
+               if (a >= b) {
+                       printf("Read %"PRId64" then %"PRId64".\n", a, b);
+                       success = false;
+                       break;
+               }
+       }
+
+       set_pmcr(get_pmcr() & ~PMU_PMCR_E);
+
+       return success;
+}
+
+void pmu_init(void)
+{
+       uint32_t dfr0;
+
+       /* probe pmu version */
+       dfr0 = get_id_dfr0();
+       pmu_version = (dfr0 >> ID_DFR0_PERFMON_SHIFT) & ID_DFR0_PERFMON_MASK;
+       report_info("PMU version: %d", pmu_version);
+}
+
 int main(void)
 {
        report_prefix_push("pmu");
 
+       pmu_init();
        report("Control register", check_pmcr());
+       report("Monotonically increasing cycle count", check_cycles_increase());
 
        return report_summary();
 }
-- 
1.8.3.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]