qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 2/3] vus: Introduce vhost-user-scsi host device


From: Felipe Franciosi
Subject: [Qemu-devel] [PATCH v3 2/3] vus: Introduce vhost-user-scsi host device
Date: Wed, 21 Dec 2016 14:17:38 -0800

This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.

To use it, one must configure Qemu with --enable-vhost-user-scsi and
start Qemu with a command line equivalent to:

qemu-system-x86_64 \
       -chardev socket,id=vus0,path=/tmp/vus.sock \
       -device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...

A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.

Signed-off-by: Felipe Franciosi <address@hidden>
---
 configure                           |  10 ++
 hw/scsi/Makefile.objs               |   1 +
 hw/scsi/vhost-user-scsi.c           | 215 ++++++++++++++++++++++++++++++++++++
 hw/virtio/virtio-pci.c              |  58 ++++++++++
 hw/virtio/virtio-pci.h              |  15 +++
 include/hw/virtio/vhost-user-scsi.h |  35 ++++++
 include/hw/virtio/virtio-scsi.h     |   5 +
 7 files changed, 339 insertions(+)
 create mode 100644 hw/scsi/vhost-user-scsi.c
 create mode 100644 include/hw/virtio/vhost-user-scsi.h

diff --git a/configure b/configure
index 3770d7c..dc73e5f 100755
--- a/configure
+++ b/configure
@@ -228,6 +228,7 @@ xfs=""
 
 vhost_net="no"
 vhost_scsi="no"
+vhost_user_scsi="no"
 vhost_vsock="no"
 kvm="no"
 colo="yes"
@@ -680,6 +681,7 @@ Haiku)
   kvm="yes"
   vhost_net="yes"
   vhost_scsi="yes"
+  vhost_user_scsi="yes"
   vhost_vsock="yes"
   QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers 
$QEMU_INCLUDES"
 ;;
@@ -1026,6 +1028,10 @@ for opt do
   ;;
   --enable-vhost-scsi) vhost_scsi="yes"
   ;;
+  --disable-vhost-user-scsi) vhost_user_scsi="no"
+  ;;
+  --enable-vhost-user-scsi) vhost_user_scsi="yes"
+  ;;
   --disable-vhost-vsock) vhost_vsock="no"
   ;;
   --enable-vhost-vsock) vhost_vsock="yes"
@@ -5061,6 +5067,7 @@ echo "posix_madvise     $posix_madvise"
 echo "libcap-ng support $cap_ng"
 echo "vhost-net support $vhost_net"
 echo "vhost-scsi support $vhost_scsi"
+echo "vhost-user-scsi support $vhost_user_scsi"
 echo "vhost-vsock support $vhost_vsock"
 echo "Trace backends    $trace_backends"
 if have_backend "simple"; then
@@ -5446,6 +5453,9 @@ fi
 if test "$vhost_scsi" = "yes" ; then
   echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
 fi
+if test "$vhost_user_scsi" = "yes" ; then
+  echo "CONFIG_VHOST_USER_SCSI=y" >> $config_host_mak
+fi
 if test "$vhost_net" = "yes" ; then
   echo "CONFIG_VHOST_NET_USED=y" >> $config_host_mak
 fi
diff --git a/hw/scsi/Makefile.objs b/hw/scsi/Makefile.objs
index 54d8754..b188f72 100644
--- a/hw/scsi/Makefile.objs
+++ b/hw/scsi/Makefile.objs
@@ -11,4 +11,5 @@ obj-$(CONFIG_PSERIES) += spapr_vscsi.o
 ifeq ($(CONFIG_VIRTIO),y)
 obj-y += virtio-scsi.o virtio-scsi-dataplane.o
 obj-$(CONFIG_VHOST_SCSI) += vhost-scsi-common.o vhost-scsi.o
+obj-$(CONFIG_VHOST_USER_SCSI) += vhost-scsi-common.o vhost-user-scsi.o
 endif
diff --git a/hw/scsi/vhost-user-scsi.c b/hw/scsi/vhost-user-scsi.c
new file mode 100644
index 0000000..ff81626
--- /dev/null
+++ b/hw/scsi/vhost-user-scsi.c
@@ -0,0 +1,215 @@
+/*
+ * vhost-user-scsi host device
+ *
+ * Copyright (c) 2016 Nutanix Inc. All rights reserved.
+ *
+ * Author:
+ *  Felipe Franciosi <address@hidden>
+ *
+ * This work is largely based on the "vhost-scsi" implementation by:
+ *  Stefan Hajnoczi    <address@hidden>
+ *  Nicholas Bellinger <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/typedefs.h"
+#include "qom/object.h"
+#include "hw/fw-path-provider.h"
+#include "hw/qdev-core.h"
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/vhost-backend.h"
+#include "hw/virtio/vhost-user-scsi.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-access.h"
+#include "sysemu/char.h"
+
+/* Features supported by the host application */
+static const int user_feature_bits[] = {
+    VIRTIO_F_NOTIFY_ON_EMPTY,
+    VIRTIO_RING_F_INDIRECT_DESC,
+    VIRTIO_RING_F_EVENT_IDX,
+    VIRTIO_SCSI_F_HOTPLUG,
+    VHOST_INVALID_FEATURE_BIT
+};
+
+static void vhost_user_scsi_set_status(VirtIODevice *vdev, uint8_t status)
+{
+    VHostUserSCSI *s = (VHostUserSCSI *)vdev;
+    VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    bool start = (status & VIRTIO_CONFIG_S_DRIVER_OK) && vdev->vm_running;
+
+    if (vsc->dev.started == start) {
+        return;
+    }
+
+    if (start) {
+        int ret;
+
+        ret = vhost_scsi_common_start(vsc);
+        if (ret < 0) {
+            error_report("unable to start vhost-user-scsi: %s", 
strerror(-ret));
+            exit(1);
+        }
+    } else {
+        vhost_scsi_common_stop(vsc);
+    }
+}
+
+static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
+{
+}
+
+static void vhost_user_scsi_save(QEMUFile *f, void *opaque)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(opaque);
+    virtio_save(vdev, f);
+}
+
+static int vhost_user_scsi_load(QEMUFile *f, void *opaque, int version_id)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(opaque);
+    return virtio_load(vdev, f, version_id);
+}
+
+static void vhost_user_scsi_realize(DeviceState *dev, Error **errp)
+{
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev);
+    VHostUserSCSI *s = VHOST_USER_SCSI(dev);
+    VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+    static int vhost_user_scsi_id;
+    Error *err = NULL;
+    int ret;
+
+    if (!vs->conf.chardev.chr) {
+        error_setg(errp, "vhost-user-scsi: missing chardev");
+        return;
+    }
+
+    virtio_scsi_common_realize(dev, &err, vhost_dummy_handle_output,
+                               vhost_dummy_handle_output,
+                               vhost_dummy_handle_output);
+    if (err != NULL) {
+        error_propagate(errp, err);
+        return;
+    }
+
+    vsc->dev.nvqs = 2 + vs->conf.num_queues;
+    vsc->dev.vqs = g_new(struct vhost_virtqueue, vsc->dev.nvqs);
+    vsc->dev.vq_index = 0;
+    vsc->dev.backend_features = 0;
+
+    ret = vhost_dev_init(&vsc->dev, (void *)&vs->conf.chardev,
+                         VHOST_BACKEND_TYPE_USER, 0);
+    if (ret < 0) {
+        error_setg(errp, "vhost-user-scsi: vhost initialization failed: %s",
+                   strerror(-ret));
+        return;
+    }
+
+    /* Channel and lun both are 0 for bootable vhost-user-scsi disk */
+    vsc->channel = 0;
+    vsc->lun = 0;
+    vsc->target = vs->conf.boot_tpgt;
+
+    register_savevm(dev, "vhost-user-scsi", vhost_user_scsi_id++, 1,
+                    vhost_user_scsi_save, vhost_user_scsi_load, s);
+}
+
+static void vhost_user_scsi_unrealize(DeviceState *dev, Error **errp)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+    VHostUserSCSI *s = VHOST_USER_SCSI(dev);
+    VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s);
+
+    /* This will stop the vhost backend. */
+    vhost_user_scsi_set_status(vdev, 0);
+
+    vhost_dev_cleanup(&vsc->dev);
+    g_free(vsc->dev.vqs);
+
+    virtio_scsi_common_unrealize(dev, errp);
+}
+
+static uint64_t vhost_user_scsi_get_features(VirtIODevice *vdev,
+                                             uint64_t features, Error **errp)
+{
+    VHostUserSCSI *s = VHOST_USER_SCSI(vdev);
+
+    // Turn on predefined features supported by this device
+    features |= s->host_features;
+
+    return vhost_scsi_common_get_features(vdev, features, errp);
+}
+
+static Property vhost_user_scsi_properties[] = {
+    DEFINE_PROP_CHR("chardev", VirtIOSCSICommon, conf.chardev),
+    DEFINE_PROP_UINT32("boot_tpgt", VirtIOSCSICommon, conf.boot_tpgt, 0),
+    DEFINE_PROP_UINT32("num_queues", VirtIOSCSICommon, conf.num_queues, 1),
+    DEFINE_PROP_UINT32("max_sectors", VirtIOSCSICommon, conf.max_sectors,
+                       0xFFFF),
+    DEFINE_PROP_UINT32("cmd_per_lun", VirtIOSCSICommon, conf.cmd_per_lun, 128),
+    DEFINE_PROP_BIT64("hotplug", VHostUserSCSI, host_features,
+                                                VIRTIO_SCSI_F_HOTPLUG,
+                                                true),
+    DEFINE_PROP_BIT64("param_change", VHostUserSCSI, host_features,
+                                                     VIRTIO_SCSI_F_CHANGE,
+                                                     true),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vhost_user_scsi_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+    FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass);
+
+    dc->props = vhost_user_scsi_properties;
+    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+    vdc->realize = vhost_user_scsi_realize;
+    vdc->unrealize = vhost_user_scsi_unrealize;
+    vdc->get_features = vhost_user_scsi_get_features;
+    vdc->set_config = vhost_scsi_common_set_config;
+    vdc->set_status = vhost_user_scsi_set_status;
+    fwc->get_dev_path = vhost_scsi_common_get_fw_dev_path;
+}
+
+static void vhost_user_scsi_instance_init(Object *obj)
+{
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(obj);
+    VHostSCSICommon *vsc = VHOST_SCSI_COMMON(obj);
+
+    vsc->feature_bits = user_feature_bits;
+
+    // Add the bootindex property for this object
+    device_add_bootindex_property(obj, &vsc->bootindex, "bootindex", NULL,
+                                  DEVICE(vsc), NULL);
+
+    // Set boot index according the the device config
+    object_property_set_int(obj, vs->conf.bootindex, "bootindex", NULL);
+}
+
+static const TypeInfo vhost_user_scsi_info = {
+    .name = TYPE_VHOST_USER_SCSI,
+    .parent = TYPE_VHOST_SCSI_COMMON,
+    .instance_size = sizeof(VHostUserSCSI),
+    .class_init = vhost_user_scsi_class_init,
+    .instance_init = vhost_user_scsi_instance_init,
+    .interfaces = (InterfaceInfo[]) {
+        { TYPE_FW_PATH_PROVIDER },
+        { }
+    },
+};
+
+static void virtio_register_types(void)
+{
+    type_register_static(&vhost_user_scsi_info);
+}
+
+type_init(virtio_register_types)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 21c2b9d..8efafed 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -2077,6 +2077,61 @@ static const TypeInfo vhost_scsi_pci_info = {
 };
 #endif
 
+/* vhost-user-scsi-pci */
+#ifdef CONFIG_VHOST_USER_SCSI
+static Property vhost_user_scsi_pci_properties[] = {
+    DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
+                       DEV_NVECTORS_UNSPECIFIED),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vhost_user_scsi_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
+{
+    VHostUserSCSIPCI *dev = VHOST_USER_SCSI_PCI(vpci_dev);
+    DeviceState *vdev = DEVICE(&dev->vdev);
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
+
+    if (vpci_dev->nvectors == DEV_NVECTORS_UNSPECIFIED) {
+        vpci_dev->nvectors = vs->conf.num_queues + 3;
+    }
+
+    qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
+    object_property_set_bool(OBJECT(vdev), true, "realized", errp);
+}
+
+static void vhost_user_scsi_pci_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
+    PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+    k->realize = vhost_user_scsi_pci_realize;
+    set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
+    dc->props = vhost_user_scsi_pci_properties;
+    pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
+    pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI;
+    pcidev_k->revision = 0x00;
+    pcidev_k->class_id = PCI_CLASS_STORAGE_SCSI;
+}
+
+static void vhost_user_scsi_pci_instance_init(Object *obj)
+{
+    VHostUserSCSIPCI *dev = VHOST_USER_SCSI_PCI(obj);
+
+    virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
+                                TYPE_VHOST_USER_SCSI);
+    object_property_add_alias(obj, "bootindex", OBJECT(&dev->vdev),
+                              "bootindex", &error_abort);
+}
+
+static const TypeInfo vhost_user_scsi_pci_info = {
+    .name          = TYPE_VHOST_USER_SCSI_PCI,
+    .parent        = TYPE_VIRTIO_PCI,
+    .instance_size = sizeof(VHostUserSCSIPCI),
+    .instance_init = vhost_user_scsi_pci_instance_init,
+    .class_init    = vhost_user_scsi_pci_class_init,
+};
+#endif /* CONFIG_VHOST_USER_SCSI */
+
 /* vhost-vsock-pci */
 
 #ifdef CONFIG_VHOST_VSOCK
@@ -2553,6 +2608,9 @@ static void virtio_pci_register_types(void)
 #ifdef CONFIG_VHOST_SCSI
     type_register_static(&vhost_scsi_pci_info);
 #endif
+#ifdef CONFIG_VHOST_USER_SCSI
+    type_register_static(&vhost_user_scsi_pci_info);
+#endif
 #ifdef CONFIG_VHOST_VSOCK
     type_register_static(&vhost_vsock_pci_info);
 #endif
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index 5e07886..a31761e 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -33,6 +33,9 @@
 #ifdef CONFIG_VHOST_SCSI
 #include "hw/virtio/vhost-scsi.h"
 #endif
+#ifdef CONFIG_VHOST_USER_SCSI
+#include "hw/virtio/vhost-user-scsi.h"
+#endif
 #ifdef CONFIG_VHOST_VSOCK
 #include "hw/virtio/vhost-vsock.h"
 #endif
@@ -44,6 +47,7 @@ typedef struct VirtIOBalloonPCI VirtIOBalloonPCI;
 typedef struct VirtIOSerialPCI VirtIOSerialPCI;
 typedef struct VirtIONetPCI VirtIONetPCI;
 typedef struct VHostSCSIPCI VHostSCSIPCI;
+typedef struct VHostUserSCSIPCI VHostUserSCSIPCI;
 typedef struct VirtIORngPCI VirtIORngPCI;
 typedef struct VirtIOInputPCI VirtIOInputPCI;
 typedef struct VirtIOInputHIDPCI VirtIOInputHIDPCI;
@@ -214,6 +218,17 @@ struct VHostSCSIPCI {
 };
 #endif
 
+#ifdef CONFIG_VHOST_USER_SCSI
+#define TYPE_VHOST_USER_SCSI_PCI "vhost-user-scsi-pci"
+#define VHOST_USER_SCSI_PCI(obj) \
+        OBJECT_CHECK(VHostUserSCSIPCI, (obj), TYPE_VHOST_USER_SCSI_PCI)
+
+struct VHostUserSCSIPCI {
+    VirtIOPCIProxy parent_obj;
+    VHostUserSCSI vdev;
+};
+#endif
+
 /*
  * virtio-blk-pci: This extends VirtioPCIProxy.
  */
diff --git a/include/hw/virtio/vhost-user-scsi.h 
b/include/hw/virtio/vhost-user-scsi.h
new file mode 100644
index 0000000..01861f7
--- /dev/null
+++ b/include/hw/virtio/vhost-user-scsi.h
@@ -0,0 +1,35 @@
+/*
+ * vhost-user-scsi host device
+ *
+ * Copyright (c) 2016 Nutanix Inc. All rights reserved.
+ *
+ * Author:
+ *  Felipe Franciosi <address@hidden>
+ *
+ * This file is largely based on "vhost-scsi.h" by:
+ *  Stefan Hajnoczi   <address@hidden>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ *
+ */
+
+#ifndef VHOST_USER_SCSI_H
+#define VHOST_USER_SCSI_H
+
+#include "qemu-common.h"
+#include "hw/qdev.h"
+#include "hw/virtio/virtio-scsi.h"
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/vhost-scsi-common.h"
+
+#define TYPE_VHOST_USER_SCSI "vhost-user-scsi"
+#define VHOST_USER_SCSI(obj) \
+        OBJECT_CHECK(VHostUserSCSI, (obj), TYPE_VHOST_USER_SCSI)
+
+typedef struct VHostUserSCSI {
+    VHostSCSICommon parent_obj;
+    uint64_t host_features;
+} VHostUserSCSI;
+
+#endif /* VHOST_USER_SCSI_H */
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 39d2177..d52e10c 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -21,6 +21,7 @@
 #include "hw/virtio/virtio.h"
 #include "hw/pci/pci.h"
 #include "hw/scsi/scsi.h"
+#include "sysemu/char.h"
 #include "sysemu/iothread.h"
 
 #define TYPE_VIRTIO_SCSI_COMMON "virtio-scsi-common"
@@ -53,6 +54,10 @@ struct VirtIOSCSIConf {
     char *vhostfd;
     char *wwpn;
 #endif
+#ifdef CONFIG_VHOST_USER_SCSI
+    CharBackend chardev;
+    int32_t bootindex;
+#endif
     uint32_t boot_tpgt;
     IOThread *iothread;
 };
-- 
1.9.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]