qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1653063] [NEW] qemu-system-arm hangs with -icount and


From: Hansni Bu
Subject: [Qemu-devel] [Bug 1653063] [NEW] qemu-system-arm hangs with -icount and -nodefaults
Date: Thu, 29 Dec 2016 08:02:16 -0000

Public bug reported:

I tested with the latest git repo, (commit:
dbe2b65566e76d3c3a0c3358285c0336ac61e757).

My configure options when building QEMU:
'../configure' '--prefix=$HOME/local/qemu.git' 
'--target-list=aarch64-softmmu,arm-softmmu' '--cpu=x86_64' '--cc=gcc' 
'--disable-user' '--disable-sdl' '--disable-stack-protector' '--disable-attr' 
'--disable-pie' '--disable-linux-aio' '--disable-tpm' '--without-system-pixman' 
'--disable-docs' '--disable-guest-agent' '--disable-guest-agent-msi' 
'--disable-modules' '--disable-sparse' '--disable-gnutls' '--disable-nettle' 
'--disable-gcrypt' '--disable-gtk' '--disable-vte' '--disable-curses' 
'--disable-vnc' '--disable-cocoa' '--disable-virtfs' '--disable-xen' 
'--disable-brlapi' '--disable-curl' '--disable-bluez' '--disable-rdma' 
'--disable-uuid' '--disable-vde' '--disable-netmap' '--disable-cap-ng' 
'--disable-attr' '--disable-vhost-net' '--disable-spice' '--disable-rbd' 
'--disable-libiscsi' '--disable-libnfs' '--disable-smartcard' 
'--disable-libusb' '--disable-usb-redir' '--disable-lzo' '--disable-snappy' 
'--disable-bzip2' '--disable-seccomp' '--disable-glusterfs' 
'--disable-archipelago' '--disable-libssh2' '--disable-vhdx' '--disable-numa' 
'--disable-werror' '--disable-blobs' '--disable-vhost-scsi' '--enable-debug' 
'--disable-strip' '--enable-debug-tcg' '--enable-debug-info' 
'--extra-cflags=-fPIC'

My host OS is Redhat RHEL-6.5. uname command gives:
Linux rslpc1 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 
x86_64 x86_64 GNU/Linux

The test image is downloaded from http://wiki.qemu.org/download/arm-
test-0.2.tar.gz

The command to re-produce the problem:
qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -icount 1 -nodefaults -chardev 
stdio,mux=on,id=char0 -serial chardev:char0 --append "console=ttyAMA0"

After console prints the message below:
"Uncompressing 
Linux.......................................................................... 
done, booting the kernel."
there's no further action noticed.

If "-icount" is not set, namely run as:
qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -nodefaults -chardev stdio,mux=on,id=char0 
-serial chardev:char0 --append "console=ttyAMA0"

or if "-nodefaults" is not set, namely run as:
qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -icount 1 --append "console=ttyAMA0"

The Linux boot procedure can finish successfully.

Thanks.
Hansni

** Affects: qemu
     Importance: Undecided
         Status: New


** Tags: icount nodefaults

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1653063

Title:
  qemu-system-arm hangs with -icount and -nodefaults

Status in QEMU:
  New

Bug description:
  I tested with the latest git repo, (commit:
  dbe2b65566e76d3c3a0c3358285c0336ac61e757).

  My configure options when building QEMU:
  '../configure' '--prefix=$HOME/local/qemu.git' 
'--target-list=aarch64-softmmu,arm-softmmu' '--cpu=x86_64' '--cc=gcc' 
'--disable-user' '--disable-sdl' '--disable-stack-protector' '--disable-attr' 
'--disable-pie' '--disable-linux-aio' '--disable-tpm' '--without-system-pixman' 
'--disable-docs' '--disable-guest-agent' '--disable-guest-agent-msi' 
'--disable-modules' '--disable-sparse' '--disable-gnutls' '--disable-nettle' 
'--disable-gcrypt' '--disable-gtk' '--disable-vte' '--disable-curses' 
'--disable-vnc' '--disable-cocoa' '--disable-virtfs' '--disable-xen' 
'--disable-brlapi' '--disable-curl' '--disable-bluez' '--disable-rdma' 
'--disable-uuid' '--disable-vde' '--disable-netmap' '--disable-cap-ng' 
'--disable-attr' '--disable-vhost-net' '--disable-spice' '--disable-rbd' 
'--disable-libiscsi' '--disable-libnfs' '--disable-smartcard' 
'--disable-libusb' '--disable-usb-redir' '--disable-lzo' '--disable-snappy' 
'--disable-bzip2' '--disable-seccomp' '--disable-glusterfs' 
'--disable-archipelago' '--disable-libssh2' '--disable-vhdx' '--disable-numa' 
'--disable-werror' '--disable-blobs' '--disable-vhost-scsi' '--enable-debug' 
'--disable-strip' '--enable-debug-tcg' '--enable-debug-info' 
'--extra-cflags=-fPIC'

  My host OS is Redhat RHEL-6.5. uname command gives:
  Linux rslpc1 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 
x86_64 x86_64 GNU/Linux

  The test image is downloaded from http://wiki.qemu.org/download/arm-
  test-0.2.tar.gz

  The command to re-produce the problem:
  qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -icount 1 -nodefaults -chardev 
stdio,mux=on,id=char0 -serial chardev:char0 --append "console=ttyAMA0"

  After console prints the message below:
  "Uncompressing 
Linux.......................................................................... 
done, booting the kernel."
  there's no further action noticed.

  If "-icount" is not set, namely run as:
  qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -nodefaults -chardev stdio,mux=on,id=char0 
-serial chardev:char0 --append "console=ttyAMA0"

  or if "-nodefaults" is not set, namely run as:
  qemu-system-arm -M integratorcp -kernel arm-test/zImage.integrator -initrd 
arm-test/arm_root.img -nographic -icount 1 --append "console=ttyAMA0"

  The Linux boot procedure can finish successfully.

  Thanks.
  Hansni

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1653063/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]