[PATCH v2 0/4] hw/arm: sabrelite: Improve emulation fidelity to allow booting upstream U-Boot

[Bin Meng]

From: Bin Meng <bin.meng@windriver.com>

At present the upstream U-Boot (as of today, v2021.01-rc3) does not
boot on QEMU sabrelite machine.

This fixes several issues to improve emulation fidelity of the i.MX6
sabrelite board. With this series, upstream U-Boot can boot to U-Boot
command shell. While we are here, add a target guide for this board
to help people run Linux kernel and U-Boot on QEMU.

Changes in v2:
- new patch: add sabrelite target guide

Bin Meng (4):
  hw/misc: imx6_ccm: Update PMU_MISC0 reset value
  hw/msic: imx6_ccm: Correct register value for silicon type
  hw/arm: sabrelite: Connect the Ethernet PHY at address 6
  docs/system: arm: Add sabrelite board description

 docs/system/arm/sabrelite.rst | 119 ++++++++++++++++++++++++++++++++++++++++++
 docs/system/target-arm.rst    |   1 +
 hw/arm/sabrelite.c            |   4 ++
 hw/misc/imx6_ccm.c            |   4 +-
 4 files changed, 126 insertions(+), 2 deletions(-)
 create mode 100644 docs/system/arm/sabrelite.rst

-- 
2.7.4