[PATCH v2 6/7] macio: wire macio GPIOs to OpenPIC using sysbus IRQs

[Mark Cave-Ayland]

This both allows the wiring to be done as Ben suggested in his original comment 
in
gpio.c and also enables the OpenPIC object property link to be removed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/misc/macio/gpio.c         | 24 +++++-------------------
 hw/misc/macio/macio.c        | 12 +++++++-----
 include/hw/misc/macio/gpio.h |  2 --
 3 files changed, 12 insertions(+), 26 deletions(-)

diff --git a/hw/misc/macio/gpio.c b/hw/misc/macio/gpio.c
index 0fef8fb335..b1bcf830c3 100644
--- a/hw/misc/macio/gpio.c
+++ b/hw/misc/macio/gpio.c
@@ -57,10 +57,7 @@ void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool 
state)
 
     s->gpio_regs[gpio] = new_reg;
 
-    /* This is will work until we fix the binding between MacIO and
-     * the MPIC properly so we can route all GPIOs and avoid going
-     * via the top level platform code.
-     *
+    /*
      * Note that we probably need to get access to the MPIC config to
      * decode polarity since qemu always use "raise" regardless.
      *
@@ -152,25 +149,15 @@ static const MemoryRegionOps macio_gpio_ops = {
     },
 };
 
-static void macio_gpio_realize(DeviceState *dev, Error **errp)
-{
-    MacIOGPIOState *s = MACIO_GPIO(dev);
-
-    s->gpio_extirqs[1] = qdev_get_gpio_in(DEVICE(s->pic),
-                                          NEWWORLD_EXTING_GPIO1);
-    s->gpio_extirqs[9] = qdev_get_gpio_in(DEVICE(s->pic),
-                                          NEWWORLD_EXTING_GPIO9);
-}
-
 static void macio_gpio_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     MacIOGPIOState *s = MACIO_GPIO(obj);
+    int i;
 
-    object_property_add_link(obj, "pic", TYPE_OPENPIC,
-                             (Object **) &s->pic,
-                             qdev_prop_allow_set_link_before_realize,
-                             0);
+    for (i = 0; i < 10; i++) {
+        sysbus_init_irq(sbd, &s->gpio_extirqs[i]);
+    }
 
     memory_region_init_io(&s->gpiomem, OBJECT(s), &macio_gpio_ops, obj,
                           "gpio", 0x30);
@@ -207,7 +194,6 @@ static void macio_gpio_class_init(ObjectClass *oc, void 
*data)
     DeviceClass *dc = DEVICE_CLASS(oc);
     NMIClass *nc = NMI_CLASS(oc);
 
-    dc->realize = macio_gpio_realize;
     dc->reset = macio_gpio_reset;
     dc->vmsd = &vmstate_macio_gpio;
     nc->nmi_monitor_handler = macio_gpio_nmi;
diff --git a/hw/misc/macio/macio.c b/hw/misc/macio/macio.c
index 36be77cede..d17cffd868 100644
--- a/hw/misc/macio/macio.c
+++ b/hw/misc/macio/macio.c
@@ -324,14 +324,16 @@ static void macio_newworld_realize(PCIDevice *d, Error 
**errp)
 
     if (ns->has_pmu) {
         /* GPIOs */
-        sysbus_dev = SYS_BUS_DEVICE(&ns->gpio);
-        object_property_set_link(OBJECT(&ns->gpio), "pic", OBJECT(pic_dev),
-                                 &error_abort);
-        memory_region_add_subregion(&s->bar, 0x50,
-                                    sysbus_mmio_get_region(sysbus_dev, 0));
         if (!qdev_realize(DEVICE(&ns->gpio), BUS(&s->macio_bus), errp)) {
             return;
         }
+        sysbus_dev = SYS_BUS_DEVICE(&ns->gpio);
+        sysbus_connect_irq(sysbus_dev, 1, qdev_get_gpio_in(pic_dev,
+                           NEWWORLD_EXTING_GPIO1));
+        sysbus_connect_irq(sysbus_dev, 9, qdev_get_gpio_in(pic_dev,
+                           NEWWORLD_EXTING_GPIO9));
+        memory_region_add_subregion(&s->bar, 0x50,
+                                    sysbus_mmio_get_region(sysbus_dev, 0));
 
         /* PMU */
         object_initialize_child(OBJECT(s), "pmu", &s->pmu, TYPE_VIA_PMU);
diff --git a/include/hw/misc/macio/gpio.h b/include/hw/misc/macio/gpio.h
index 4dee09a9dd..7d2aa886c2 100644
--- a/include/hw/misc/macio/gpio.h
+++ b/include/hw/misc/macio/gpio.h
@@ -38,8 +38,6 @@ struct MacIOGPIOState {
     SysBusDevice parent;
     /*< public >*/
 
-    OpenPICState *pic;
-
     MemoryRegion gpiomem;
     qemu_irq gpio_extirqs[10];
     uint8_t gpio_levels[8];
-- 
2.20.1