qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 18/22] hw/riscv: sifive_u: Add QSPI2 controller and connect an SD


From: Bin Meng
Subject: [PATCH 18/22] hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
Date: Thu, 31 Dec 2020 19:30:06 +0800

From: Bin Meng <bin.meng@windriver.com>

This adds the QSPI2 controller to the SoC, and connnects an SD
card to it. The generation of corresponding device tree source
fragment is also added.

Specify machine property `msel` to 11 to boot the same upstream
U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
Note subsequent payload is stored in the SD card image.

$ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
    -bios u-boot-spl.bin -drive file=sdcard.img,if=sd

Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

 include/hw/riscv/sifive_u.h |  3 +++
 hw/riscv/sifive_u.c         | 43 +++++++++++++++++++++++++++++++++++--
 hw/riscv/Kconfig            |  1 +
 3 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index 8824b7c031..de1464a2ce 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -47,6 +47,7 @@ typedef struct SiFiveUSoCState {
     SiFiveUOTPState otp;
     SiFivePDMAState dma;
     SiFiveSPIState spi0;
+    SiFiveSPIState spi2;
     CadenceGEMState gem;
 
     uint32_t serial;
@@ -85,6 +86,7 @@ enum {
     SIFIVE_U_DEV_UART1,
     SIFIVE_U_DEV_GPIO,
     SIFIVE_U_DEV_QSPI0,
+    SIFIVE_U_DEV_QSPI2,
     SIFIVE_U_DEV_OTP,
     SIFIVE_U_DEV_DMC,
     SIFIVE_U_DEV_FLASH0,
@@ -99,6 +101,7 @@ enum {
     SIFIVE_U_L2CC_IRQ2 = 3,
     SIFIVE_U_UART0_IRQ = 4,
     SIFIVE_U_UART1_IRQ = 5,
+    SIFIVE_U_QSPI2_IRQ = 6,
     SIFIVE_U_GPIO_IRQ0 = 7,
     SIFIVE_U_GPIO_IRQ1 = 8,
     SIFIVE_U_GPIO_IRQ2 = 9,
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index acac4feef1..d59333d18d 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -16,6 +16,7 @@
  * 6) GEM (Gigabit Ethernet Controller) and management block
  * 7) DMA (Direct Memory Access Controller)
  * 8) SPI0 connected to an SPI flash
+ * 9) SPI2 connected to an SD card
  *
  * This board currently generates devicetree dynamically that indicates at 
least
  * two harts and up to five harts.
@@ -77,6 +78,7 @@ static const struct MemmapEntry {
     [SIFIVE_U_DEV_UART0] =    { 0x10010000,     0x1000 },
     [SIFIVE_U_DEV_UART1] =    { 0x10011000,     0x1000 },
     [SIFIVE_U_DEV_QSPI0] =    { 0x10040000,     0x1000 },
+    [SIFIVE_U_DEV_QSPI2] =    { 0x10050000,     0x1000 },
     [SIFIVE_U_DEV_GPIO] =     { 0x10060000,     0x1000 },
     [SIFIVE_U_DEV_OTP] =      { 0x10070000,     0x1000 },
     [SIFIVE_U_DEV_GEM] =      { 0x10090000,     0x2000 },
@@ -345,6 +347,31 @@ static void create_fdt(SiFiveUState *s, const struct 
MemmapEntry *memmap,
                             "sifive,fu540-c000-ccache");
     g_free(nodename);
 
+    nodename = g_strdup_printf("/soc/spi@%lx",
+        (long)memmap[SIFIVE_U_DEV_QSPI2].base);
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
+    qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
+    qemu_fdt_setprop_cells(fdt, nodename, "clocks",
+        prci_phandle, PRCI_CLK_TLCLK);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
+    qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
+    qemu_fdt_setprop_cells(fdt, nodename, "reg",
+        0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
+        0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
+    g_free(nodename);
+
+    nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
+        (long)memmap[SIFIVE_U_DEV_QSPI2].base);
+    qemu_fdt_add_subnode(fdt, nodename);
+    qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
+    qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
+    qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
+    qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
+    qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
+    g_free(nodename);
+
     nodename = g_strdup_printf("/soc/spi@%lx",
         (long)memmap[SIFIVE_U_DEV_QSPI0].base);
     qemu_fdt_add_subnode(fdt, nodename);
@@ -469,8 +496,8 @@ static void sifive_u_machine_init(MachineState *machine)
     uint32_t fdt_load_addr;
     uint64_t kernel_entry;
     DriveInfo *dinfo;
-    DeviceState *flash_dev;
-    qemu_irq flash_cs;
+    DeviceState *flash_dev, *sd_dev;
+    qemu_irq flash_cs, sd_cs;
 
     /* Initialize SoC */
     object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
@@ -616,6 +643,12 @@ static void sifive_u_machine_init(MachineState *machine)
 
     flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
+
+    /* Connect an SD card to SPI2 */
+    sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
+
+    sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
 }
 
 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
@@ -730,6 +763,7 @@ static void sifive_u_soc_instance_init(Object *obj)
     object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
     object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
     object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
+    object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
 }
 
 static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
@@ -883,6 +917,11 @@ static void sifive_u_soc_realize(DeviceState *dev, Error 
**errp)
                     memmap[SIFIVE_U_DEV_QSPI0].base);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ));
+    sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
+                    memmap[SIFIVE_U_DEV_QSPI2].base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
+                       qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ));
 }
 
 static Property sifive_u_soc_props[] = {
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index 6330297b4e..d139074b02 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -57,6 +57,7 @@ config SIFIVE_U
     select SIFIVE_U_OTP
     select SIFIVE_U_PRCI
     select SSI_M25P80
+    select SSI_SD
     select UNIMP
 
 config SPIKE
-- 
2.25.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]