[PATCH v2 11/24] hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI

[Peter Maydell]

On the MPS2 boards, the first 32 interrupt lines are entirely
internal to the SSE; interrupt lines for devices outside the SSE
start at 32.  In the application notes that document each FPGA image,
the interrupt wiring is documented from the point of view of the CPU,
so '0' is the first of the SSE's interrupts and the devices in the
FPGA image itself are '32' and up: so the UART 0 Receive interrupt is
32, the SPI #0 interrupt is 51, and so on.

Within our implementation, because the external interrupts must be
connected to the EXP_IRQ[0...n] lines of the SSE object, we made the
get_sse_irq_in() function take an irqno whose values start at 0 for
the first FPGA device interrupt.  In this numbering scheme the UART 0
Receive interrupt is 0, the SPI #0 interrupt is 19, and so on.

The result of these two different numbering schemes has been that
half of the devices were wired up to the wrong IRQs: the UART IRQs
are wired up correctly, but the DMA and SPI devices were passing
start-at-32 values to get_sse_irq_in() and so being mis-connected.

Fix the bug by making get_sse_irq_in() take values specified with the
same scheme that the hardware manuals use, to avoid confusion.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/mps2-tz.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 6362652e617..ff8b7e5f1ae 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -139,11 +139,21 @@ static void make_ram_alias(MemoryRegion *mr, const char 
*name,
 
 static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno)
 {
-    /* Return a qemu_irq which will signal IRQ n to all CPUs in the SSE. */
+    /*
+     * Return a qemu_irq which will signal IRQ n to all CPUs in the
+     * SSE.  The irqno should be as the CPU sees it, so the first
+     * external-to-the-SSE interrupt is 32.
+     */
     MachineClass *mc = MACHINE_GET_CLASS(mms);
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
 
-    assert(irqno < mmc->numirq);
+    assert(irqno >= 32 && irqno < (mmc->numirq + 32));
+
+    /*
+     * Convert from "CPU irq number" (as listed in the FPGA image
+     * documentation) to the SSE external-interrupt number.
+     */
+    irqno -= 32;
 
     if (mc->max_cpus > 1) {
         return qdev_get_gpio_in(DEVICE(&mms->cpu_irq_splitter[irqno]), 0);
@@ -197,9 +207,9 @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, 
void *opaque,
     MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms);
     CMSDKAPBUART *uart = opaque;
     int i = uart - &mms->uart[0];
-    int rxirqno = i * 2;
-    int txirqno = i * 2 + 1;
-    int combirqno = i + 10;
+    int rxirqno = i * 2 + 32;
+    int txirqno = i * 2 + 33;
+    int combirqno = i + 42;
     SysBusDevice *s;
     DeviceState *orgate_dev = DEVICE(&mms->uart_irq_orgate);
 
@@ -266,7 +276,7 @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, 
void *opaque,
 
     s = SYS_BUS_DEVICE(mms->lan9118);
     sysbus_realize_and_unref(s, &error_fatal);
-    sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 16));
+    sysbus_connect_irq(s, 0, get_sse_irq_in(mms, 48));
     return sysbus_mmio_get_region(s, 0);
 }
 
@@ -507,7 +517,7 @@ static void mps2tz_common_init(MachineState *machine)
                             &error_fatal);
     qdev_realize(DEVICE(&mms->uart_irq_orgate), NULL, &error_fatal);
     qdev_connect_gpio_out(DEVICE(&mms->uart_irq_orgate), 0,
-                          get_sse_irq_in(mms, 15));
+                          get_sse_irq_in(mms, 47));
 
     /* Most of the devices in the FPGA are behind Peripheral Protection
      * Controllers. The required order for initializing things is:
-- 
2.20.1