qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 01/10] scsi-disk: move scsi_handle_rw_error earlier


From: Paolo Bonzini
Subject: [PATCH 01/10] scsi-disk: move scsi_handle_rw_error earlier
Date: Wed, 24 Feb 2021 19:24:44 +0100

Remove the forward declaration.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/scsi-disk.c | 168 ++++++++++++++++++++++----------------------
 1 file changed, 83 insertions(+), 85 deletions(-)

diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index a2716b26b4..18ab777017 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -111,8 +111,6 @@ struct SCSIDiskState {
     uint16_t rotation_rate;
 };
 
-static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed);
-
 static void scsi_free_request(SCSIRequest *req)
 {
     SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req);
@@ -182,6 +180,89 @@ static void scsi_disk_load_request(QEMUFile *f, 
SCSIRequest *req)
     qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 }
 
+/*
+ * scsi_handle_rw_error has two return values.  False means that the error
+ * must be ignored, true means that the error has been processed and the
+ * caller should not do anything else for this request.  Note that
+ * scsi_handle_rw_error always manages its reference counts, independent
+ * of the return value.
+ */
+static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
+{
+    bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+    SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s));
+    BlockErrorAction action = blk_get_error_action(s->qdev.conf.blk,
+                                                   is_read, error);
+
+    if (action == BLOCK_ERROR_ACTION_REPORT) {
+        if (acct_failed) {
+            block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
+        }
+        switch (error) {
+        case 0:
+            /* A passthrough command has run and has produced sense data; check
+             * whether the error has to be handled by the guest or should 
rather
+             * pause the host.
+             */
+            assert(r->status && *r->status);
+            if (scsi_sense_buf_is_guest_recoverable(r->req.sense, 
sizeof(r->req.sense))) {
+                /* These errors are handled by guest. */
+                sdc->update_sense(&r->req);
+                scsi_req_complete(&r->req, *r->status);
+                return true;
+            }
+            error = scsi_sense_buf_to_errno(r->req.sense, 
sizeof(r->req.sense));
+            break;
+#ifdef CONFIG_LINUX
+            /* These errno mapping are specific to Linux.  For more 
information:
+             * - scsi_decide_disposition in drivers/scsi/scsi_error.c
+             * - scsi_result_to_blk_status in drivers/scsi/scsi_lib.c
+             * - blk_errors[] in block/blk-core.c
+             */
+        case EBADE:
+            /* DID_NEXUS_FAILURE -> BLK_STS_NEXUS.  */
+            scsi_req_complete(&r->req, RESERVATION_CONFLICT);
+            break;
+        case ENODATA:
+            /* DID_MEDIUM_ERROR -> BLK_STS_MEDIUM.  */
+            scsi_check_condition(r, SENSE_CODE(READ_ERROR));
+            break;
+        case EREMOTEIO:
+            /* DID_TARGET_FAILURE -> BLK_STS_TARGET.  */
+            scsi_req_complete(&r->req, HARDWARE_ERROR);
+            break;
+#endif
+        case ENOMEDIUM:
+            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
+            break;
+        case ENOMEM:
+            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
+            break;
+        case EINVAL:
+            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+            break;
+        case ENOSPC:
+            scsi_check_condition(r, SENSE_CODE(SPACE_ALLOC_FAILED));
+            break;
+        default:
+            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
+            break;
+        }
+    }
+
+    blk_error_action(s->qdev.conf.blk, action, is_read, error);
+    if (action == BLOCK_ERROR_ACTION_IGNORE) {
+        scsi_req_complete(&r->req, 0);
+        return true;
+    }
+
+    if (action == BLOCK_ERROR_ACTION_STOP) {
+        scsi_req_retry(&r->req);
+    }
+    return true;
+}
+
 static bool scsi_disk_req_check_error(SCSIDiskReq *r, int ret, bool 
acct_failed)
 {
     if (r->req.io_canceled) {
@@ -428,89 +509,6 @@ static void scsi_read_data(SCSIRequest *req)
     }
 }
 
-/*
- * scsi_handle_rw_error has two return values.  False means that the error
- * must be ignored, true means that the error has been processed and the
- * caller should not do anything else for this request.  Note that
- * scsi_handle_rw_error always manages its reference counts, independent
- * of the return value.
- */
-static bool scsi_handle_rw_error(SCSIDiskReq *r, int error, bool acct_failed)
-{
-    bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV);
-    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
-    SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s));
-    BlockErrorAction action = blk_get_error_action(s->qdev.conf.blk,
-                                                   is_read, error);
-
-    if (action == BLOCK_ERROR_ACTION_REPORT) {
-        if (acct_failed) {
-            block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
-        }
-        switch (error) {
-        case 0:
-            /* A passthrough command has run and has produced sense data; check
-             * whether the error has to be handled by the guest or should 
rather
-             * pause the host.
-             */
-            assert(r->status && *r->status);
-            if (scsi_sense_buf_is_guest_recoverable(r->req.sense, 
sizeof(r->req.sense))) {
-                /* These errors are handled by guest. */
-                sdc->update_sense(&r->req);
-                scsi_req_complete(&r->req, *r->status);
-                return true;
-            }
-            error = scsi_sense_buf_to_errno(r->req.sense, 
sizeof(r->req.sense));
-            break;
-#ifdef CONFIG_LINUX
-            /* These errno mapping are specific to Linux.  For more 
information:
-             * - scsi_decide_disposition in drivers/scsi/scsi_error.c
-             * - scsi_result_to_blk_status in drivers/scsi/scsi_lib.c
-             * - blk_errors[] in block/blk-core.c
-             */
-        case EBADE:
-            /* DID_NEXUS_FAILURE -> BLK_STS_NEXUS.  */
-            scsi_req_complete(&r->req, RESERVATION_CONFLICT);
-            break;
-        case ENODATA:
-            /* DID_MEDIUM_ERROR -> BLK_STS_MEDIUM.  */
-            scsi_check_condition(r, SENSE_CODE(READ_ERROR));
-            break;
-        case EREMOTEIO:
-            /* DID_TARGET_FAILURE -> BLK_STS_TARGET.  */
-            scsi_req_complete(&r->req, HARDWARE_ERROR);
-            break;
-#endif
-        case ENOMEDIUM:
-            scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
-            break;
-        case ENOMEM:
-            scsi_check_condition(r, SENSE_CODE(TARGET_FAILURE));
-            break;
-        case EINVAL:
-            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
-            break;
-        case ENOSPC:
-            scsi_check_condition(r, SENSE_CODE(SPACE_ALLOC_FAILED));
-            break;
-        default:
-            scsi_check_condition(r, SENSE_CODE(IO_ERROR));
-            break;
-        }
-    }
-
-    blk_error_action(s->qdev.conf.blk, action, is_read, error);
-    if (action == BLOCK_ERROR_ACTION_IGNORE) {
-        scsi_req_complete(&r->req, 0);
-        return true;
-    }
-
-    if (action == BLOCK_ERROR_ACTION_STOP) {
-        scsi_req_retry(&r->req);
-    }
-    return true;
-}
-
 static void scsi_write_complete_noio(SCSIDiskReq *r, int ret)
 {
     uint32_t n;
-- 
2.29.2





reply via email to

[Prev in Thread] Current Thread [Next in Thread]