[PATCH v5 05/12] hw/dma: Add the DMA control interface

[Francisco Iglesias]

An option on real hardware when embedding a DMA engine into a peripheral
is to make the peripheral control the engine through a custom DMA control
(hardware) interface between the two. Software drivers in this scenario
configure and trigger DMA operations through the controlling peripheral's
register API (for example, writing a specific bit in a register could
propagate down to a transfer start signal on the DMA control interface).
At the same time the status, results and interrupts for the transfer might
still be intended to be read and caught through the DMA engine's register
API (and signals).

This patch adds a QEMU DMA control interface that can be used for
modelling above scenario. Through this new interface a peripheral model
embedding a DMA engine model will be able to directly initiate transfers
through the DMA. At the same time the transfer state, result and
completion signaling will be read and caught through the DMA engine
model's register API and signaling.

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
---
 hw/dma/dma-ctrl-if.c         | 30 ++++++++++++++++++++++++++
 hw/dma/meson.build           |  1 +
 include/hw/dma/dma-ctrl-if.h | 51 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+)
 create mode 100644 hw/dma/dma-ctrl-if.c
 create mode 100644 include/hw/dma/dma-ctrl-if.h

diff --git a/hw/dma/dma-ctrl-if.c b/hw/dma/dma-ctrl-if.c
new file mode 100644
index 0000000000..30b6ff8d90
--- /dev/null
+++ b/hw/dma/dma-ctrl-if.c
@@ -0,0 +1,30 @@
+/*
+ * DMA control interface.
+ *
+ * Copyright (c) 2021 Xilinx Inc.
+ * Written by Francisco Iglesias <francisco.iglesias@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#include "qemu/osdep.h"
+#include "exec/hwaddr.h"
+#include "hw/dma/dma-ctrl-if.h"
+
+void dma_ctrl_if_read(DmaCtrlIf *dma, hwaddr addr, uint32_t len)
+{
+    DmaCtrlIfClass *dcc =  DMA_CTRL_IF_GET_CLASS(dma);
+    dcc->read(dma, addr, len);
+}
+
+static const TypeInfo dma_ctrl_if_info = {
+    .name          = TYPE_DMA_CTRL_IF,
+    .parent        = TYPE_INTERFACE,
+    .class_size = sizeof(DmaCtrlIfClass),
+};
+
+static void dma_ctrl_if_register_types(void)
+{
+    type_register_static(&dma_ctrl_if_info);
+}
+
+type_init(dma_ctrl_if_register_types)
diff --git a/hw/dma/meson.build b/hw/dma/meson.build
index f3f0661bc3..c43c067856 100644
--- a/hw/dma/meson.build
+++ b/hw/dma/meson.build
@@ -14,3 +14,4 @@ softmmu_ss.add(when: 'CONFIG_PXA2XX', if_true: 
files('pxa2xx_dma.c'))
 softmmu_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_dma.c'))
 softmmu_ss.add(when: 'CONFIG_SIFIVE_PDMA', if_true: files('sifive_pdma.c'))
 softmmu_ss.add(when: 'CONFIG_XLNX_CSU_DMA', if_true: files('xlnx_csu_dma.c'))
+common_ss.add(when: 'CONFIG_XILINX_AXI', if_true: files('dma-ctrl-if.c'))
diff --git a/include/hw/dma/dma-ctrl-if.h b/include/hw/dma/dma-ctrl-if.h
new file mode 100644
index 0000000000..0882cf0a57
--- /dev/null
+++ b/include/hw/dma/dma-ctrl-if.h
@@ -0,0 +1,51 @@
+/*
+ * DMA control interface.
+ *
+ * Copyright (c) 2021 Xilinx Inc.
+ * Written by Francisco Iglesias <francisco.iglesias@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef HW_DMA_CTRL_IF_H
+#define HW_DMA_CTRL_IF_H
+
+#include "hw/hw.h"
+#include "qom/object.h"
+
+#define TYPE_DMA_CTRL_IF "dma-ctrl-if"
+typedef struct DmaCtrlIfClass DmaCtrlIfClass;
+DECLARE_CLASS_CHECKERS(DmaCtrlIfClass, DMA_CTRL_IF,
+                       TYPE_DMA_CTRL_IF)
+
+#define DMA_CTRL_IF(obj) \
+     INTERFACE_CHECK(DmaCtrlIf, (obj), TYPE_DMA_CTRL_IF)
+
+typedef struct DmaCtrlIf {
+    Object Parent;
+} DmaCtrlIf;
+
+typedef struct DmaCtrlIfClass {
+    InterfaceClass parent;
+
+    /*
+     * read: Start a read transfer on the DMA engine implementing the DMA
+     * control interface
+     *
+     * @dma_ctrl: the DMA engine implementing this interface
+     * @addr: the address to read
+     * @len: the number of bytes to read at 'addr'
+     */
+    void (*read)(DmaCtrlIf *dma, hwaddr addr, uint32_t len);
+} DmaCtrlIfClass;
+
+/*
+ * Start a read transfer on a DMA engine implementing the DMA control
+ * interface.
+ *
+ * @dma_ctrl: the DMA engine implementing this interface
+ * @addr: the address to read
+ * @len: the number of bytes to read at 'addr'
+ */
+void dma_ctrl_if_read(DmaCtrlIf *dma, hwaddr addr, uint32_t len);
+
+#endif /* HW_DMA_CTRL_IF_H */
-- 
2.11.0