[PATCH v5 00/11] hw/pci: SR-IOV related fixes and improvements

[Akihiko Odaki]

I submitted a RFC series[1] to add support for SR-IOV emulation to
virtio-net-pci. During the development of the series, I fixed some
trivial bugs and made improvements that I think are independently
useful. This series extracts those fixes and improvements from the RFC
series.

[1]: https://patchew.org/QEMU/20231210-sriov-v2-0-b959e8a6dfaf@daynix.com/

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
Changes in v5:
- Added patch "hw/pci: Always call pcie_sriov_pf_reset()".
- Added patch "pcie_sriov: Reset SR-IOV extended capability".
- Removed a reference to PCI_SRIOV_CTRL_VFE in hw/nvme.
  (Michael S. Tsirkin)
- Noted the impact on the guest of patch "pcie_sriov: Do not reset
  NumVFs after unregistering VFs". (Michael S. Tsirkin)
- Changed to use pcie_sriov_num_vfs().
- Restored pci_set_power() and changed it to call pci_set_enabled() only
  for PFs with an expalanation. (Michael S. Tsirkin)
- Reordered patches.
- Link to v4: 
https://lore.kernel.org/r/20240214-reuse-v4-0-89ad093a07f4@daynix.com

Changes in v4:
- Reverted the change to pci_rom_bar_explicitly_enabled().
  (Michael S. Tsirkin)
- Added patch "pcie_sriov: Do not reset NumVFs after unregistering VFs".
- Added patch "hw/nvme: Refer to dev->exp.sriov_pf.num_vfs".
- Link to v3: 
https://lore.kernel.org/r/20240212-reuse-v3-0-8017b689ce7f@daynix.com

Changes in v3:
- Extracted patch "hw/pci: Use -1 as a default value for rombar" from
  patch "hw/pci: Determine if rombar is explicitly enabled"
  (Philippe Mathieu-Daudé)
- Added an audit result of PCIDevice::rom_bar to the message of patch
  "hw/pci: Use -1 as a default value for rombar"
  (Philippe Mathieu-Daudé)
- Link to v2: 
https://lore.kernel.org/r/20240210-reuse-v2-0-24ba2a502692@daynix.com

Changes in v2:
- Reset after enabling a function so that NVMe VF state gets updated.
- Link to v1: 
https://lore.kernel.org/r/20240203-reuse-v1-0-5be8c5ce6338@daynix.com

---
Akihiko Odaki (11):
      hw/nvme: Use pcie_sriov_num_vfs()
      pcie_sriov: Validate NumVFs
      hw/pci: Use -1 as a default value for rombar
      hw/pci: Determine if rombar is explicitly enabled
      vfio: Avoid inspecting option QDict for rombar
      hw/qdev: Remove opts member
      pcie_sriov: Reset SR-IOV extended capability
      pcie_sriov: Do not reset NumVFs after disabling VFs
      hw/pci: Always call pcie_sriov_pf_reset()
      hw/pci: Rename has_power to enabled
      pcie_sriov: Reuse SR-IOV VF device instances

 docs/pcie_sriov.txt         |   8 ++-
 include/hw/pci/pci.h        |   2 +-
 include/hw/pci/pci_device.h |  22 ++++++-
 include/hw/pci/pcie_sriov.h |  10 ++--
 include/hw/qdev-core.h      |   4 --
 hw/core/qdev.c              |   1 -
 hw/net/igb.c                |  15 +++--
 hw/nvme/ctrl.c              |  54 ++++++++---------
 hw/pci/pci.c                |  17 +++---
 hw/pci/pci_host.c           |   4 +-
 hw/pci/pcie_sriov.c         | 142 ++++++++++++++++++++++----------------------
 hw/vfio/pci.c               |   3 +-
 system/qdev-monitor.c       |  12 ++--
 13 files changed, 157 insertions(+), 137 deletions(-)
---
base-commit: 5005aed8a7e728d028efb40e243ecfc2b4f3df3a
change-id: 20240129-reuse-faae22b11934

Best regards,
-- 
Akihiko Odaki <akihiko.odaki@daynix.com>