qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Stable-8.2.2 26/60] hw/net/tulip: add chip status register values


From: Michael Tokarev
Subject: [Stable-8.2.2 26/60] hw/net/tulip: add chip status register values
Date: Wed, 21 Feb 2024 11:20:14 +0300

From: Sven Schnelle <svens@stackframe.org>

Netbsd isn't able to detect a link on the emulated tulip card. That's
because netbsd reads the Chip Status Register of the Phy (address
0x14). The default phy data in the qemu tulip driver is all zero,
which means no link is established and autonegotation isn't complete.

Therefore set the register to 0x3b40, which means:

Link is up, Autonegotation complete, Full Duplex, 100MBit/s Link
speed.

Also clear the mask because this register is read only.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 9b60a3ed5569a70bbdd29e3c9ec4c5d4685c6e2c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

diff --git a/hw/net/tulip.c b/hw/net/tulip.c
index 962086aae4..f21b8ca62b 100644
--- a/hw/net/tulip.c
+++ b/hw/net/tulip.c
@@ -421,7 +421,7 @@ static uint16_t tulip_mdi_default[] = {
     /* MDI Registers 8 - 15 */
     0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
     /* MDI Registers 16 - 31 */
-    0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+    0x0003, 0x0000, 0x0001, 0x0000, 0x3b40, 0x0000, 0x0000, 0x0000,
     0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 };
 
@@ -429,7 +429,7 @@ static uint16_t tulip_mdi_default[] = {
 static const uint16_t tulip_mdi_mask[] = {
     0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
     0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
-    0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+    0x0fff, 0x0000, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff,
     0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 };
 
-- 
2.39.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]