[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FYI: update auxfiles
From: |
Alexandre Duret-Lutz |
Subject: |
FYI: update auxfiles |
Date: |
Tue, 11 Nov 2003 22:07:54 +0100 |
User-agent: |
Gnus/5.1003 (Gnus v5.10.3) Emacs/21.3 (gnu/linux) |
2003-11-11 Alexandre Duret-Lutz <address@hidden>
* Makefile.am (fetch): Get all files from savannah. Do not
postprocess Struct.pm and XFiles.pm, since we now are the master
of these.
* lib/config.sub, lib/config.guess, lib/config-ml.in,
lib/texinfo.tex: New upstream versions.
Index: Makefile.am
===================================================================
RCS file: /cvs/automake/automake/Makefile.am,v
retrieving revision 1.221
diff -u -r1.221 Makefile.am
--- Makefile.am 23 Sep 2003 22:39:11 -0000 1.221
+++ Makefile.am 11 Nov 2003 21:06:40 -0000
@@ -276,6 +276,7 @@
## Program to use to fetch files.
WGET = wget
+WGETSGO = $(WGET) http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~
## Files that we fetch and which we compare against.
## FIXME should be a lot more here
@@ -293,14 +294,12 @@
mkdir Fetchdir
## If a get fails then that is a problem.
(cd Fetchdir && \
- $(WGET) ftp://ftp.gnu.org/gnu/config/config.guess; \
- $(WGET) ftp://ftp.gnu.org/gnu/config/config.sub; \
- $(WGET) ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex; \
- $(WGET)
http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/autoconf/autoconf/INSTALL?content-type=text/plain
-O INSTALL; \
- $(WGET)
http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/gcc/gcc/config-ml.in; \
- $(WGET)
http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/gcc/gcc/symlink-tree)
- perl -pi -e 's/Autom4te::/Automake::/g' \
- Fetchdir/Automake/Struct.pm Fetchdir/Automake/XFile.pm
+ $(WGETSGO)/config/config/config.guess; \
+ $(WGETSGO)/config/config/config.sub; \
+ $(WGETSGO)/texinfo/texinfo/doc/texinfo.tex; \
+ $(WGETSGO)/autoconf/autoconf/INSTALL; \
+ $(WGETSGO)/gcc/gcc/config-ml.in; \
+ $(WGETSGO)/gcc/gcc/symlink-tree)
## Don't exit after test because we want to give as many errors as
## possible.
@stat=0; for file in $(FETCHFILES); do \
Index: lib/config-ml.in
===================================================================
RCS file: /cvs/automake/automake/lib/config-ml.in,v
retrieving revision 1.3
diff -u -r1.3 config-ml.in
--- lib/config-ml.in 1 Sep 2003 22:05:16 -0000 1.3
+++ lib/config-ml.in 11 Nov 2003 21:06:45 -0000
@@ -553,6 +553,7 @@
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
LDFLAGS="$(LDFLAGS) $${flags}" \
+ MULTIFLAGS="$${flags}" \
DESTDIR="$(DESTDIR)" \
INSTALL="$(INSTALL)" \
INSTALL_DATA="$(INSTALL_DATA)" \
Index: lib/config.guess
===================================================================
RCS file: /cvs/automake/automake/lib/config.guess,v
retrieving revision 1.35
diff -u -r1.35 config.guess
--- lib/config.guess 6 Oct 2003 21:56:45 -0000 1.35
+++ lib/config.guess 11 Nov 2003 21:06:47 -0000
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-timestamp='2003-10-03'
+timestamp='2003-10-16'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -221,6 +221,9 @@
mvmeppc:OpenBSD:*:*)
echo powerpc-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
+ pegasos:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
pmax:OpenBSD:*:*)
echo mipsel-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
@@ -307,6 +310,9 @@
*:OS/390:*:*)
echo i370-ibm-openedition
exit 0 ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
@@ -742,6 +748,11 @@
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
@@ -751,7 +762,7 @@
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
+ *:FreeBSD:*:*)
# Determine whether the default compiler uses glibc.
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -763,7 +774,7 @@
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- # GNU/FreeBSD systems have a "k" prefix to indicate we are using
+ # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
# FreeBSD's kernel, but not the complete OS.
case ${LIBC} in gnu) kernel_only='k' ;; esac
echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo
${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
@@ -799,8 +810,13 @@
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
+ # the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,'
| tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit 0 ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit 0 ;;
@@ -1052,7 +1068,7 @@
exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 |
3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 |
SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 |
3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 |
SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
Index: lib/config.sub
===================================================================
RCS file: /cvs/automake/automake/lib/config.sub,v
retrieving revision 1.173
diff -u -r1.173 config.sub
--- lib/config.sub 6 Oct 2003 21:56:45 -0000 1.173
+++ lib/config.sub 11 Nov 2003 21:06:47 -0000
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-timestamp='2003-08-18'
+timestamp='2003-11-03'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -118,7 +118,8 @@
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | netbsd*-gnu* |
storm-chaos* | os2-emx* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* |
uclinux-gnu* | \
+ kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* |
rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -743,6 +744,10 @@
basic_machine=or32-unknown
os=-coff
;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
@@ -963,6 +968,10 @@
tower | tower-32)
basic_machine=m68k-ncr
;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
udi29k)
basic_machine=a29k-amd
os=-udi
@@ -1131,13 +1140,13 @@
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* |
-freebsd* | -riscix* \
+ | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* |
-kfreebsd* | -freebsd* | -riscix* \
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* |
-oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* |
-mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
@@ -1182,6 +1191,9 @@
-opened*)
os=-openedition
;;
+ -os400*)
+ os=-os400
+ ;;
-wince*)
os=-wince
;;
@@ -1225,6 +1237,9 @@
-sinix*)
os=-sysv4
;;
+ -tpf*)
+ os=-tpf
+ ;;
-triton*)
os=-sysv3
;;
@@ -1473,8 +1488,14 @@
-mvs* | -opened*)
vendor=ibm
;;
+ -os400*)
+ vendor=ibm
+ ;;
-ptx*)
vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
Index: lib/texinfo.tex
===================================================================
RCS file: /cvs/automake/automake/lib/texinfo.tex,v
retrieving revision 1.29
diff -u -r1.29 texinfo.tex
--- lib/texinfo.tex 6 Oct 2003 21:56:45 -0000 1.29
+++ lib/texinfo.tex 11 Nov 2003 21:06:52 -0000
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2003-10-06.08}
+\def\texinfoversion{2003-10-29.10}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
@@ -23,21 +23,16 @@
% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
% Boston, MA 02111-1307, USA.
%
-% In other words, you are welcome to use, share and improve this program.
-% You are forbidden to forbid anyone else to use, share and improve
-% what you give them. Help stamp out software-hoarding!
-%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. (This has been our intent since Texinfo was invented.)
+%
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
-% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
-% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
+% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org),
-% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-%
-% The texinfo.tex in any given Texinfo distribution could well be out
+% (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
% of date, so if that's what you're using, please check.
%
% Send bug reports to address@hidden Please include including a
@@ -59,6 +54,9 @@
% It is possible to adapt texinfo.tex for other languages, to some
% extent. You can get the existing language-specific files from the
% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
\message{Loading texinfo [version \texinfoversion]:}
@@ -160,11 +158,6 @@
%
\def\gobble#1{}
-% True if #1 is the empty string, i.e., called like `\ifempty{}'.
-%
-\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
-\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
-
% Hyphenation fixes.
\hyphenation{ap-pen-dix}
\hyphenation{eshell}
@@ -259,7 +252,7 @@
% the page break happens to be in the middle of an example.
\shipout\vbox{%
% Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfmkdest{\the\pageno}\fi
+ \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
%
\ifcropmarks \vbox to \outervsize\bgroup
\hsize = \outerhsize
@@ -340,81 +333,82 @@
% the input line (except we remove a trailing comment). #1 should be a
% macro which expects an ordinary undelimited TeX argument.
%
-\def\parsearg#1{%
- \let\next = #1%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+ \def\next{#2}%
\begingroup
\obeylines
- \futurelet\temp\parseargx
+ #1%
+ \parseargx
}
% If the next token is an obeyed space (from an @example environment or
% the like), remove it and recurse. Otherwise, we're done.
-\def\parseargx{%
- % \obeyedspace is defined far below, after the definition of \sepspaces.
- \ifx\obeyedspace\temp
- \expandafter\parseargdiscardspace
+\def\parseargx{\futurelet\temp\parseargy}
+\def\parseargy{%
+ \expandafter\ifx\obeyedspace\temp
+ \def\temp{\expandafter\parseargx\gobble}
\else
- \expandafter\parseargline
+ \def\temp{\parseargline\empty}% Insert the \empty token, see below.
\fi
+ \temp
}
-% Remove a single space (as the delimiter token to the macro call).
-{\obeyspaces %
- \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-
{\obeylines %
\gdef\parseargline#1^^M{%
\endgroup % End of the group started in \parsearg.
- %
- % First remove any @c comment, then any @comment.
- % Result of each macro is put in \toks0.
- \argremovec #1\c\relax %
- \expandafter\argremovecomment \the\toks0 \comment\relax %
- %
- % Call the caller's macro, saved as \next in \parsearg.
- \expandafter\next\expandafter{\the\toks0}%
+ \argremovecomment #1\comment\ArgTerm%
}%
}
-% Since all \c{,omment} does is throw away the argument, we can let TeX
-% do that for us. The \relax here is matched by the \relax in the call
-% in \parseargline; it could be more or less anything, its purpose is
-% just to delimit the argument to the \c.
-\def\argremovec#1\c#2\relax{\toks0 = {#1}}
-\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
-
-% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\removeactivespaces#1\ArgTerm}
+% \argremovec might leave us with trailing spaces, though; e.g.,
% @end itemize @c foo
-% will have two active spaces as part of the argument with the
-% `itemize'. Here we remove all active spaces from #1, and assign the
-% result to \toks0.
-%
-% This loses if there are any *other* active characters besides spaces
-% in the argument -- _ ^ +, for example -- since they get expanded.
-% Fortunately, Texinfo does not define any such commands. (If it ever
-% does, the catcode of the characters in questionwill have to be changed
-% here.) But this means we cannot call \removeactivespaces as part of
-% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
-% that \parsearg gets might well have any character at all in it.
-%
-\def\removeactivespaces#1{%
- \begingroup
- \ignoreactivespaces
- \edef\temp{#1}%
- \global\toks0 = \expandafter{\temp}%
- \endgroup
+{\obeyspaces
+ \gdef\removeactivespaces#1\ArgTerm{\removeactivespacesX#1\RemSpac
\RemSpac\ArgTerm}
+ \gdef\removeactivespacesX#1 \RemSpac{\removeactivespacesY{#1}}
+}
+\def\removeactivespacesY#1#2\ArgTerm{%
+ \def\temp{#2}%
+ \ifx\temp\empty
+ \let\temp\finishparsearg
+ \else
+ \let\temp\removeactivespaces
+ \fi
+ \temp #1\ArgTerm
}
-% Change the active space to expand to nothing.
-%
-\begingroup
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it
+% just before passing the control to \next.
+% (But first, we have to remove the remaining \RemSpac token.)
+\def\finishparsearg#1\RemSpac\ArgTerm{\expandafter\next\expandafter{#1}}
+
+% Several utility definitions with active space:
+{
\obeyspaces
- \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
-\endgroup
+ \gdef\obeyedspace{ }
+
+ % Make each space character in the input produce a normal interword
+ % space in the output. Don't allow a line break at this space, as this
+ % is used only in environments like @example, where each line of input
+ % should produce a line of output anyway.
+ %
+ \gdef\sepspaces{\obeyspaces\let =\tie}
+
+ % If an index command is used in an @example environment, any spaces
+ % therein should become regular spaces in the raw index file, not the
+ % expansion of \tie (\leavevmode \penalty address@hidden \ ).
+ \gdef\unsepspaces{\let =\space}
+}
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
%% These are used to keep @begin/@end levels from running away
%% Call \inENV within environments (after a \begingroup)
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
@@ -436,20 +430,21 @@
%
\def\end{\parsearg\endxxx}
\def\endxxx #1{%
- \removeactivespaces{#1}%
- \edef\endthing{\the\toks0}%
- %
- \expandafter\ifx\csname E\endthing\endcsname\relax
- \expandafter\ifx\csname \endthing\endcsname\relax
- % There's no \foo, i.e., no ``environment'' foo.
- \errhelp = \EMsimple
- \errmessage{Undefined command address@hidden \endthing'}%
- \else
- \unmatchedenderror\endthing
- \fi
+ \expandafter\ifx\csname E#1\endcsname\relax
+ \badenderror{#1}%
\else
% Everything's ok; the right environment has been started.
- \csname E\endthing\endcsname
+ \csname E#1\endcsname
+ \fi
+}
+
+\def\badenderror#1{%
+ \expandafter\ifx\csname#1\endcsname\relax
+ % There's no \foo, i.e., no ``environment'' foo.
+ \errhelp = \EMsimple
+ \errmessage{Undefined command address@hidden #1'}%
+ \else
+ \unmatchedenderror{#1}%
\fi
}
@@ -1096,7 +1091,13 @@
\ifnum\pdftexversion < 14 \else
\pdfrefximage \pdflastximage
\fi}
- \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
+ \def\pdfmkdest#1{{%
+ % We have to set dummies so commands such as @code in a section title
+ % aren't expanded.
+ \atdummies
+ \normalturnoffactive
+ \pdfdest name{#1} xyz%
+ }}
\def\pdfmkpgn#1{#1}
\let\linkcolor = \Blue % was Cyan, but that seems light?
\def\endlink{\Black\pdfendlink}
@@ -1329,10 +1330,6 @@
\setfont\textrm\rmshape{10}{\mainmagstep}
\setfont\texttt\ttshape{10}{\mainmagstep}
\fi
-% Instead of cmb10, you may want to use cmbx10.
-% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10
-% (in Bob's opinion).
\setfont\textbf\bfshape{10}{\mainmagstep}
\setfont\textit\itshape{10}{\mainmagstep}
\setfont\textsl\slshape{10}{\mainmagstep}
@@ -1343,7 +1340,7 @@
\font\textsy=cmsy10 scaled \mainmagstep
% A few fonts for @defun, etc.
-\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+\setfont\defbf\bfshape{10}{\magstep1}
\setfont\deftt\ttshape{10}{\magstep1}
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
@@ -1514,7 +1511,7 @@
% Fonts for short table of contents.
\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
\setfont\shortcontsl\slshape{12}{1000}
\setfont\shortconttt\ttshape{12}{1000}
@@ -1747,6 +1744,7 @@
\def\ii#1{{\it #1}} % italic font
% @acronym downcases the argument and prints in smallcaps.
+% It would be nicer to go one point size down.
\def\acronym#1{{\smallcaps \lowercase{#1}}}
% @pounds{} is a sterling sign.
@@ -2134,9 +2132,10 @@
\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
\def\vritemindex #1{\doind {vr}{\code{#1}}}%
-{\obeyspaces %
+{\obeyspaces
\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
+\tablez{#1}{#2}{#3}{#4}{#5}{#6}}%
+}
\def\tablez #1#2#3#4#5#6{%
\aboveenvbreak %
@@ -2597,7 +2596,9 @@
\def\direntry{\doignore{direntry}}
\def\documentdescriptionword{documentdescription}
\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
\def\ifhtml{\doignore{ifhtml}}
\def\ifinfo{\doignore{ifinfo}}
\def\ifnottex{\doignore{ifnottex}}
@@ -3030,6 +3031,7 @@
% Assorted special characters.
\definedummyword{bullet}%
\definedummyword{copyright}%
+ \definedummyword{registeredsymbol}%
\definedummyword{dots}%
\definedummyword{enddots}%
\definedummyword{equiv}%
@@ -3053,12 +3055,6 @@
\turnoffmacros
}
-% If an index command is used in an @example environment, any spaces
-% therein should become regular spaces in the raw index file, not the
-% expansion of \tie (\leavevmode \penalty address@hidden \ ).
-{\obeyspaces
- \gdef\unsepspaces{\obeyspaces\let =\space}}
-
% \indexnofonts is used when outputting the strings to sort the index
% by, and when constructing control sequence names. It eliminates all
@@ -3208,7 +3204,7 @@
\temp
}
-% Take care of unwanted page breaks:
+% Take care of unwanted page breaks:
%
% If a skip is the last thing on the list now, preserve it
% by backing up by \lastskip, doing the \write, then inserting
@@ -3727,7 +3723,10 @@
\outer\def\chapter{\parsearg\chapteryyy}
\def\chapteryyy#1{\numhead0{#1}} % normally numhead0 calls chapterzzz
\def\chapterzzz#1{%
- \secno=0 \subsecno=0 \subsubsecno=0 \advance\chapno by 1
+ % section resetting is \global in case the chapter is in a group, such
+ % as an @include file.
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\chapno by 1
\message{\putwordChapter\space \the\chapno}%
%
% Write the actual heading.
@@ -3742,7 +3741,8 @@
\outer\def\appendix{\parsearg\appendixyyy}
\def\appendixyyy#1{\apphead0{#1}} % normally apphead0 calls appendixzzz
\def\appendixzzz#1{%
- \secno=0 \subsecno=0 \subsubsecno=0 \advance\appendixno by 1
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\appendixno by 1
\def\appendixnum{\putwordAppendix\space \appendixletter}%
\message{\appendixnum}%
\chapmacro{#1}{Yappendix}{\appendixletter}%
@@ -3761,7 +3761,8 @@
\outer\def\unnumbered{\parsearg\unnumberedyyy}
\def\unnumberedyyy#1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
\def\unnumberedzzz#1{%
- \secno=0 \subsecno=0 \subsubsecno=0 \advance\unnumberedno by 1
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\unnumberedno by 1
%
% This used to be simply \message{#1}, but TeX fully expands the
% argument to \message. Therefore, if #1 contained @-commands, TeX
@@ -3787,7 +3788,7 @@
\outer\def\numberedsec{\parsearg\secyyy}
\def\secyyy#1{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
- \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
\sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
}
@@ -3795,14 +3796,14 @@
\outer\def\appendixsec{\parsearg\appendixsecyyy}
\def\appendixsecyyy#1{\apphead1{#1}} % normally calls appendixsectionzzz
\def\appendixsectionzzz#1{%
- \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
\sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
}
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
\def\unnumberedsecyyy#1{\unnmhead1{#1}} % normally calls unnumberedseczzz
\def\unnumberedseczzz#1{%
- \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
\sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
}
@@ -3810,14 +3811,14 @@
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
\def\numberedsubsecyyy#1{\numhead2{#1}} % normally calls numberedsubseczzz
\def\numberedsubseczzz#1{%
- \subsubsecno=0 \advance\subsecno by 1
+ \global\subsubsecno=0 \global\advance\subsecno by 1
\sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
}
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
\def\appendixsubsecyyy#1{\apphead2{#1}} % normally calls appendixsubseczzz
\def\appendixsubseczzz#1{%
- \subsubsecno=0 \advance\subsecno by 1
+ \global\subsubsecno=0 \global\advance\subsecno by 1
\sectionheading{#1}{subsec}{Yappendix}%
{\appendixletter.\the\secno.\the\subsecno}%
}
@@ -3825,7 +3826,7 @@
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
\def\unnumberedsubsecyyy#1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
\def\unnumberedsubseczzz#1{%
- \subsubsecno=0 \advance\subsecno by 1
+ \global\subsubsecno=0 \global\advance\subsecno by 1
\sectionheading{#1}{subsec}{Ynothing}%
{\the\unnumberedno.\the\secno.\the\subsecno}%
}
@@ -3834,7 +3835,7 @@
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
\def\numberedsubsubsecyyy#1{\numhead3{#1}} % normally numberedsubsubseczzz
\def\numberedsubsubseczzz#1{%
- \advance\subsubsecno by 1
+ \global\advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Ynumbered}%
{\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
@@ -3842,7 +3843,7 @@
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
\def\appendixsubsubsecyyy#1{\apphead3{#1}} % normally appendixsubsubseczzz
\def\appendixsubsubseczzz#1{%
- \advance\subsubsecno by 1
+ \global\advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Yappendix}%
{\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
}
@@ -3850,7 +3851,7 @@
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
\def\unnumberedsubsubsecyyy#1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
\def\unnumberedsubsubseczzz#1{%
- \advance\subsubsecno by 1
+ \global\advance\subsubsecno by 1
\sectionheading{#1}{subsubsec}{Ynothing}%
{\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
@@ -3975,9 +3976,8 @@
\chapfonts \rm
%
% Have to define \thissection before calling \donoderef, because the
- % xref code eventually uses it, as \Ytitle. On the other hand, it
- % has to be called after \pchapsepmacro, or the headline will change
- % too soon.
+ % xref code eventually uses it. On the other hand, it has to be called
+ % after \pchapsepmacro, or the headline will change too soon.
\gdef\thissection{#1}%
\gdef\thischaptername{#1}%
%
@@ -4493,19 +4493,6 @@
% have any width.
\def\lisppar{\null\endgraf}
-% Make each space character in the input produce a normal interword
-% space in the output. Don't allow a line break at this space, as this
-% is used only in environments like @example, where each line of input
-% should produce a line of output anyway.
-%
-{\obeyspaces %
-\gdef\sepspaces{\obeyspaces\let =\tie}}
-
-% Define \obeyedspace to be our active space, whatever it is. This is
-% for use in \parsearg.
-{\sepspaces%
-\global\let\obeyedspace= }
-
% This space is always present above and below environments.
\newskip\envskipamount \envskipamount = 0pt
@@ -4839,7 +4826,7 @@
% ignore everything up to the first ^^M, that's the newline at the end
% of the @verbatim input line itself. Otherwise we get an extra blank
% line in the output.
- address@hidden verbatim{#2\end{verbatim}}%
+ address@hidden verbatim{#2\end verbatim}%
\endgroup
%
\def\verbatim{%
@@ -4960,63 +4947,88 @@
\newskip\defargsindent \defargsindent=50pt
\newskip\deflastargmargin \deflastargmargin=18pt
-\newcount\parencount
-
% We want ()&[] to print specially on the defun line.
%
\def\activeparens{%
\catcode`\(=\active \catcode`\)=\active
- \catcode`\&=\active
\catcode`\[=\active \catcode`\]=\active
+ \catcode`\&=\active
}
% Make control sequences which act like normal parenthesis chars.
\let\lparen = ( \let\rparen = )
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-
% Be sure that we always have a definition for `(', etc. For example,
% if the fn name has parens in it, \boldbrax will not be in effect yet,
% so TeX would otherwise complain about undefined control sequence.
-\global\let(=\lparen \global\let)=\rparen
-\global\let[=\lbrack \global\let]=\rbrack
+{
+ \activeparens
+ \global\let(=\lparen \global\let)=\rparen
+ \global\let[=\lbrack \global\let]=\rbrack
+ \global\let& = \&
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-% This is used to turn on special parens
-% but make & act ordinary (given that it's active).
-\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
- \global\advance\parencount by 1
+ \gdef\functionparens{\boldbrax\let&=\amprm}
+ \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
}
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
- % also in that case restore the outer-level definition of (.
- \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
- \global\advance \parencount by -1 }
+
+\newcount\parencount
+
% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\let\ampnr = \&
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\rm\} }
-% Active &'s sneak into the index arguments, so make sure it's defined.
-{
- \catcode`& = \active
- \global\let& = \ampnr
+\def\parenfont{%
+ \ifampseen
+ % At the first level, print parens in roman,
+ % otherwise use the default font.
+ \ifnum \parencount=1 \rm \fi
+ \else
+ % The \sf parens (in \boldbrax) actually are a little bolder than
+ % the contained text. This is especially needed for [ and ] .
+ \sf
+ \fi
+}
+\def\infirstlevel#1{%
+ \ifampseen
+ \ifnum\parencount=1
+ #1%
+ \fi
+ \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+ \global\advance\parencount by 1
+ {\parenfont(}%
+ \infirstlevel \bfafterword
+}
+\def\clnr{%
+ {\parenfont)}%
+ \infirstlevel \sl
+ \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+ \global\advance\brackcount by 1
+ {\bf[}%
+}
+\def\rbrb{%
+ {\bf]}%
+ \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+ \ifnum\parencount=0 \else \badparencount \fi
+ \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+\def\badparencount{%
+ \errmessage{Unbalanced parentheses in @def}%
+ \global\parencount=0
+}
+\def\badbrackcount{%
+ \errmessage{Unbalanced square braces in @def}%
+ \global\brackcount=0
}
% \defname, which formats the name of the @def (not the args).
@@ -5024,39 +5036,35 @@
% #2 is the type of definition, such as "Function".
%
\def\defname#1#2{%
- % How we'll output the type name. Putting it in brackets helps
+ % Get the values of \leftskip and \rightskip as they were outside the @def...
+ \advance\leftskip by -\defbodyindent
+ %
+ % How we'll format the type name. Putting it in brackets helps
% distinguish it from the body text that may end up on the next line
% just below it.
- \ifempty{#2}%
- \def\defnametype{}%
- \else
- \def\defnametype{[\rm #2]}%
- \fi
- %
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \dimen2=\leftskip
- \advance\dimen2 by -\defbodyindent
+ \def\temp{#2}%
+ \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
%
- % Figure out values for the paragraph shape.
- \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
- \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
- \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations
- \parshape 2 0in \dimen0 \defargsindent \dimen1
+ % Figure out line sizes for the paragraph shape.
+ % The first line needs space for \box0; but if \rightskip is nonzero,
+ % we need only space for the part of \box0 which exceeds it:
+ \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
+ % The continuations:
+ \dimen2=\hsize \advance\dimen2 by -\defargsindent
+ % (plain.tex says that \dimen1 should be used only as global.)
+ \parshape 2 0in \dimen0 \defargsindent \dimen2
%
- % Output arg 2 ("Function" or some such) but stuck inside a box of
- % width 0 so it does not interfere with linebreaking.
+ % Put the type name to the right margin.
\noindent
- %
- {% Adjust \hsize to exclude the ambient margins,
- % so that \rightline will obey them.
- \advance \hsize by -\dimen2
- \dimen3 = 0pt % was -1.25pc
- \rlap{\rightline{\defnametype\kern\dimen3}}%
+ \hbox to 0pt{%
+ \hfil\box0 \kern-\hsize
+ % \hsize has to be shortened this way:
+ \kern\leftskip
+ % Intentionally do not respect \rightskip, since we need the space.
}%
%
% Allow all lines to be underfull without complaint:
\tolerance=10000 \hbadness=10000
- \advance\leftskip by -\defbodyindent
\exdentamount=\defbodyindent
{\df #1}\enskip % output function name
% \defunargs will be called next to output the arguments, if any.
@@ -5069,19 +5077,21 @@
%
\def\parsebodycommon#1#2#3{%
\begingroup\inENV
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check for penalty 10002 (inserted by
- % \defargscommonending) instead of 10000, since the sectioning
- % commands insert a \penalty10000, and we don't want to allow a break
- % between a section heading and a defun.
- \ifnum\lastpenalty=10002 \penalty2000 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \ifnum\lastpenalty<10000 \medbreak
- \else \medskip % preceded by discardable penalty, so not a breakpoint
+ \ifnum\lastpenalty<10000
+ \medbreak
+ \else
+ % If there are two @def commands in a row, we'll have a \nobreak,
+ % which is there to keep the function description together with its
+ % header. But if there's nothing but headers, we need to allow a
+ % break somewhere. Check for penalty 10002 (inserted by
+ % \defargscommonending) instead of 10000, since the sectioning
+ % commands insert a \penalty10000, and we don't want to allow a break
+ % between a section heading and a defun.
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ % Similarly, after a section heading, do not allow a break.
+ % But do insert the glue.
+ \medskip % preceded by discardable penalty, so not a breakpoint
\fi
%
% Define the \E... end token that this defining construct specifies
@@ -5098,7 +5108,7 @@
\def\defxbodycommon{%
% As with \parsebodycommon above, allow line break if we have multiple
% x headers in a row. It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty2000 \fi
+ \ifnum\lastpenalty=10002 \penalty3000 \fi
%
\begingroup\obeylines
}
@@ -5258,15 +5268,15 @@
{\tensl\hyphenchar\font=0}%
#1%
{\tensl\hyphenchar\font=45}%
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+ \checkparencounts
\defargscommonending
}
\def\deftypefunargs #1{%
% Expand, preventing hyphenation at `-' chars.
% Note that groups don't affect changes in \hyphenchar.
-% Use \boldbraxnoamp, not \functionparens, so that & is not special.
-\boldbraxnoamp
+% Use \boldbrax, not \functionparens, so that & is not special.
+\boldbrax
\tclose{#1}% avoid \code because of side effects on active chars
\defargscommonending
}
@@ -5320,8 +5330,6 @@
\def\deftypefnheaderx #1#2#3 #4\relax{%
\doind {fn}{\code{#3}}% Make entry in function index
\begingroup
-\normalparens % notably, turn off `&' magic, which prevents
-% at least some C++ text from working
\defname {\defheaderxcond#2\relax$.$#3}{#1}%
\deftypefunargs {#4}\endgroup %
\catcode\equalChar=\other % Turn off change made in \defparsebody
@@ -5447,7 +5455,9 @@
% First, define the processing that is wanted for arguments of @defvar.
% This is actually simple: just print them in roman.
% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
+\def\defvarargs #1{%
+ \boldbrax
+ #1%
\defargscommonending
}
@@ -5817,12 +5827,16 @@
% @alias.
% We need some trickery to remove the optional spaces around the equal
% sign. Just make them active and then expand them all to nothing.
-\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{\ignoreactivespaces
-\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
- \expandafter\noexpand\csname#2\endcsname}%
-\expandafter\endgroup\next}
+\def\aliasyyy #1=#2\relax{%
+ {%
+ \expandafter\let\obeyedspace=\empty
+ \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+ }%
+ \next
+}
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
\message{cross references,}
@@ -5850,7 +5864,7 @@
%
\def\donoderef#1{%
\ifx\lastnode\empty\else
- \expandafter\expandafter\expandafter\setref{\lastnode}{#1}%
+ \setref{\lastnode}{#1}%
\global\let\lastnode=\empty
\fi
}
@@ -5866,26 +5880,30 @@
% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
% anchor), namely NAME-title (the corresponding @chapter/etc. name),
% NAME-pg (the page number), and NAME-snt (section number and type).
-% Called from \foonoderef.
+% Called from \donoderef and \anchor.
%
-% We have to set dummies so commands such as @code in a section title
-% aren't expanded. It would be nicer not to expand the titles in the
-% first place, but that is hard to do.
+% We take care not to fully expand the title, since it may contain
+% arbitrary macros.
%
-% Likewise, use \turnoffactive so that punctuation chars such as underscore
+% Use \turnoffactive so that punctuation chars such as underscore
% and backslash work in node names.
%
-\def\setref#1#2{{%
- \atdummies
+\def\setref#1#2{%
\pdfmkdest{#1}%
- %
\iflinks
- \turnoffactive
- \dosetq{#1-title}{Ytitle}%
- \dosetq{#1-pg}{Ypagenumber}%
- \dosetq{#1-snt}{#2}%
+ {%
+ \turnoffactive
+ \edef\writexrdef##1##2{%
+ address@hidden #1 of \setref, expanded by the \edef
+ ##1}{##2}}% these are parameters of \writexrdef
+ }%
+ \toks0 = \expandafter{\thissection}%
+ \immediate \writexrdef{title}{\the\toks0 }%
+ \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+ \writexrdef{pg}{\folio}% will be written later, during \shipout
+ }%
\fi
-}}
+}
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
@@ -5978,21 +5996,8 @@
%
\def\xrefprintnodename#1{[#1]}
-% \dosetq is called from \setref to do the actual \write (\iflinks).
+% Things referred to by \setref.
%
-\def\dosetq#1#2{%
- \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
- \next
-}
-
-% \internalsetq{foo}{page} expands into
-% CHARACTERS @xrdef{foo}{...expansion of \page...}
address@hidden #2\endcsname}}
-
-% Things to be expanded by \internalsetq.
-%
-\def\Ypagenumber{\noexpand\folio}
-\def\Ytitle{\thissection}
\def\Ynothing{}
\def\Yomitfromtoc{}
\def\Ynumbered{%
@@ -6063,6 +6068,8 @@
\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
% Read the last existing aux file, if any. No error if none exists.
+% Open the new one.
+%
\def\readauxfile{\begingroup
address@hidden
\catcode`\^^A=\other
@@ -6149,8 +6156,10 @@
\input \jobname.aux
\global\havexrefstrue
\fi
- % Open the new aux file. TeX will close it automatically at exit.
- \openout\auxfile=\jobname.aux
+ % Open the new aux file right away (otherwise the \immediate's in
+ % \setref cause spurious terminal output). TeX will close it
+ % automatically at exit.
+ \immediate\openout\auxfile=\jobname.aux
\endgroup}
@@ -6742,3 +6751,9 @@
@c time-stamp-format: "%:y-%02m-%02d.%02H"
@c time-stamp-end: "}"
@c End:
+
address@hidden vim:sw=2:
+
address@hidden
+ arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
address@hidden ignore
--
Alexandre Duret-Lutz
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- FYI: update auxfiles,
Alexandre Duret-Lutz <=