[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avr-gcc-list] for loop problem
From: |
Adrian Cottle |
Subject: |
[avr-gcc-list] for loop problem |
Date: |
Fri, 17 Jan 2003 11:49:48 -0000 |
Hi
Thanks for everyone help on the reset problem yesterday. the watchdog timer
solution worked great.
I have another problem, not sure if its a problem with me or the conpliler.
I have the function below (well part of it) and it waits in a loop until
the UART flag is flagged. If i put a 100ms delay in or do something like
send a byte to the uart it works fine, but as soon as i leave a empty for
loop it crashed and needs resettting.
I've tryed putting just a ; in the loop and also a very small loop just
using up a couple of clock cycles but this doesnt work either.
Its a 8515 running at 8MHz
many thanks
Adrian
int Pulse_Handler(void)
{
int i;
uart_send_byte(33);
while(UART_Flag == 0)
{
msdelay(1);
//uart_send_byte(46);
}
UART_Flag = 0 ;
uart_send_byte(85);
This message is confidential and intended solely for the use of the
individual or entity to whom it is addressed. If you are not the intended
recipient, please contact us, delete the message from your computer and destroy
any copies. Any review, distribution, copying, other use of, or the taking of
any action in reliance upon its contents without our prior permission is
prohibited.
Internet communications are not always secure and therefore Horstmann
Controls Limited does not accept legal responsibility for this message.
The recipient is responsible for verifying its authenticity before acting on
the contents. Any attachment may contain software viruses, we cannot accept
liability for any damage which you sustain as a result of software viruses.
You should carry out your own virus checks before opening any attachment. Any
views or opinions presented are solely those of the author and do not
necessarily represent those of Horstmann Controls Limited.
Horstmann Controls Limited
South Bristol Business Park
Roman Farm Road
Bristol, BS4 1UP
Tel : +44 (0) 117 978 8700
Fax : +44 (0) 117 978 8701
Web : www.horstmann.co.uk
____________________________________________________________________
This message has been checked for all known viruses by Star Internet
delivered through the MessageLabs Virus Scanning Service.
avr-gcc-list at http://avr1.org
- [avr-gcc-list] for loop problem,
Adrian Cottle <=