RE: [avr-gcc-list] avrdude & ATmega162

[E. Weddington]

On 21 Nov 2003 at 6:52, Larry Barello wrote:

> Look at the "avrdude.conf" file, copy the section that most closely matches,
> then adjust it per the data sheet (it really isn't hard, the configuration
> largely matches how Atmel list stuff in the data sheet).  Then send your
> change to the address@hidden to be included in the up-coming
> release.
> 

Yes, this is the most desirable, as it improves avrdude.
 
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden Behalf Of Dan Miner
> 

<snip> 

> 2) I am using the STK500 as the ISP programmer and have also
>   installed AVRstudio.  Is there a way to use AVRstudio or some
>   other software to program my target board with WinAVR output?

The "WinAVR output" is nothing more than an Intel Hex file or Motorola S-
Record file (if you specify this format). These 2 formats are very common 
output formats for practically all embedded systems. Many, many programmers 
use one or both formats to download software to a device. Yes, you can use 
the STK500 programmer with the AVR Studio programmer with Intel Hex files 
and download to your device.

Eric