[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] Using avrdude with Atmel USB dongle
From: |
dimax un |
Subject: |
Re: [avr-gcc-list] Using avrdude with Atmel USB dongle |
Date: |
Mon, 20 Nov 2006 15:41:32 +0200 |
HI.
I have build avrdude ver 5.2 under CYGWIN.
Everything seams to work fine but at the beginning I get strange message:
avrdude -p atmega128 -c avrispmkii -P usb -U flash:w:/HT300.hex
found 5 busses
avrdude.exe: stk500v2_recv_mk2: error in USB receive
avrdude.exe: AVR device initialized and ready to accept instructions
........
Programing is working. But I do not understand why it gets error:
avrdude.exe: stk500v2_recv_mk2: error in USB receive
And another small problem is relatively big delay of about 5-6 seconds
after I get message
found 5 busses
Libusb reports:
DLL version: 0.1.10.1
Driver version: 0.1.10.1
BTW I have attached script/instruction on how to build avrdude with
USB support under Cygwin
On 9/14/06, Neil Davey <address@hidden> wrote:
dimax un wrote:
> Neil, I'm not sure about your replies and I'll ask it more precisely:
> Will latest avrdude from WinAVR work with AVRISP mkII (under Windows).
> If no what shell I do to make it work?
> Thanks.
>
As Eric and Joerg said, the current version does not, but I have placed
a binary version here:
http://www.daveytronics.com/index.php?option=com_content&task=view&id=16&Itemid=27
Along with some basic instructions.. YMMV
Regards
Neil Davey
--
;-------------------------------------------------------
; Micro connection to the MacroVision
; http://www.xdimax.com
;--------------------------------------------------------
CYGWIN_INSTALL.sh
Description: Bourne shell script
- Re: [avr-gcc-list] Using avrdude with Atmel USB dongle,
dimax un <=