[avrdude-dev] config for ATMEGA8515

[Matthias Weißer]

Hi

i added the ATMEGA8515 to my config file and tested it with EEPROM and flash
section. It worked for me under WindowsXP and avrdude 4.2.0 from latest
WINAVR. So here it is the part of avrdude.conf

#------------------------------------------------------------
# ATmega8515
#------------------------------------------------------------

part
    id               = "m8515";
    desc             = "ATMEGA8515";
    stk500_devcode   = 0x63;
    chip_erase_delay = 9000;
    pgm_enable       = "1 0 1 0  1 1 0 0    0 1 0 1  0 0 1 1",
                       "x x x x  x x x x    x x x x  x x x x";

    chip_erase       = "1 0 1 0  1 1 0 0    1 0 0 x  x x x x",
                       "x x x x  x x x x    x x x x  x x x x";

    memory "eeprom"
        size            = 512;
        min_write_delay = 9000;
        max_write_delay = 9000;
        readback_p1     = 0xff;
        readback_p2     = 0xff;
 read            = "  1   0   1   0      0   0   0   0",
                          "  0   0   x   x      x   x   x  a8",
                          " a7  a6  a5  a4     a3  a2  a1  a0",
                          "  o   o   o   o      o   o   o   o";

 write           = "  1   1   0   0      0   0   0   0",
                          "  0   0   x   x      x   x   x  a8",
                          " a7  a6  a5  a4     a3  a2  a1  a0",
                          "  i   i   i   i      i   i   i   i";
      ;
    memory "flash"
        paged           = yes;
        size            = 8192;
        page_size       = 64;
        num_pages       = 128;
        min_write_delay = 4500;
        max_write_delay = 9000;
        readback_p1     = 0xff;
        readback_p2     = 0xff;
        read_lo         = "  0   0   1   0    0   0   0   0",
                          "  0   0   0   0  a11 a10  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  o   o   o   o    o   o   o   o";

        read_hi         = "  0   0   1   0    1   0   0   0",
                          "  0   0   0   0  a11 a10  a9  a8",
                          " a7  a6  a5  a4   a3  a2  a1  a0",
                          "  o   o   o   o    o   o   o   o";

        loadpage_lo     = "  0   1   0   0      0   0   0   0",
                          "  0   0   0   0      x   x   x   x",
                          "  x   x   x  a4     a3  a2  a1  a0",
                          "  i   i   i   i      i   i   i   i";

        loadpage_hi     = "  0   1   0   0      1   0   0   0",
                          "  0   0   0   0      x   x   x   x",
                          "  x   x   x  a4     a3  a2  a1  a0",
                          "  i   i   i   i      i   i   i   i";

        writepage       = "  0   1   0   0      1   1   0   0",
                          "  0   0   0   0    a11 a10  a9  a8",
                          " a7  a6  a5   x      x   x   x   x",
                          "  x   x   x   x      x   x   x   x";
      ;

    memory "lfuse"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1  0 0 0 0   0 0 0 0  0 0 0 0",
                          "x x x x  x x x x   o o o o  o o o o";

        write           = "1 0 1 0  1 1 0 0   1 0 1 0  0 0 0 0",
                          "x x x x  x x x x   i i i i  i i i i";
      ;

    memory "hfuse"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1  1 0 0 0   0 0 0 0  1 0 0 0",
                          "x x x x  x x x x   o o o o  o o o o";

        write           = "1 0 1 0  1 1 0 0   1 0 1 0  1 0 0 0",
                          "x x x x  x x x x   i i i i  i i i i";
      ;

    memory "lock"
        size            = 1;
        min_write_delay = 4500;
        max_write_delay = 4500;
        read            = "0 1 0 1  1 0 0 0   0 0 0 0  0 0 0 0",
                          "x x x x  x x x x   x x o o  o o o o";

        write           = "1 0 1 0  1 1 0 0   1 1 1 x  x x x x",
                          "x x x x  x x x x   1 1 i i  i i i i";
      ;

    memory "calibration"
        size            = 1;
        read            = "0 0 1 1  1 0 0 0   0 0 x x  x x x x",
                          "0 0 0 0  0 0 0 0   o o o o  o o o o";
      ;

    memory "signature"
        size            = 3;
        read            = "0  0  1  1   0  0  0  0   x  x  x  x   x  x  x
x",
                          "x  x  x  x   x  x a1 a0   o  o  o  o   o  o  o
o";
      ;
  ;


Matthias Weißer
address@hidden
http://www.matwei.de