[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: still no luck with grub
From: |
Daniel Senderowicz |
Subject: |
Re: still no luck with grub |
Date: |
Fri, 23 Jan 2004 09:40:05 -0800 (PST) |
Hi,
>Disable INT13 BIOS extentions in the Adaptec BIOS.
>CTRL-A while booting.
>
>The Adaptec card has a bug in it's firmware, and changing this setting
>causes grub to use different calls to load the system.
>If you Adaptec card has a flash rom chip, then upgrade to the latest
>Adaptec firmware.
I couldn't figure out how to disable the INT13 BIOS extensions.
I feel that I'm going nowhere. Let me summarize what's happening.
I turn the machine on (or press reset) and after the usual BIOS
and SCSI introductions I get the "grub>" prompt. So I do:
grub> root (hd0,0)
grub> kernel (hd0,0)/vmlinuz-2.4.20-28-9smp
grub> boot
The machine starts gunziping the kernel but after a few lines it
stops with the following last 4 lines:
kmod: failed to exec /sbin/modprobe -s -k block-major-72, errno = 2
VFS: Cannot open root device "" or 48:05
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 48:05
>From there, the only way to get out is by pressing the reset button,
ctrl-alt-delete doesn't work. I should point out that some time
in the past I was able to start the system with lilo. Is there
anything inherently incompatible with my hardware (HP Vectra XW +
adaptec AIC-7880) and grub? Thanks.
Dan
- still no luck with grub, Daniel Senderowicz, 2004/01/05
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/06
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/22
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/22
- Re: still no luck with grub,
Daniel Senderowicz <=
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/23
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/24
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/31
- Re: still no luck with grub, Daniel Senderowicz, 2004/01/31