[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Readback Registers
From: |
Matt Ettus |
Subject: |
Re: [Discuss-gnuradio] Readback Registers |
Date: |
Thu, 11 May 2006 16:44:15 -0700 |
In the main module, usrp_std.v you can see where we instantiate
serial_io. There are 4 inputs on that which are the readback registers.
They are distinct from the setting registers. If you want to readback a
setting register, just store the set value in software instead.
Matt
On Thu, 2006-05-11 at 00:39 -0400, amit malani wrote:
> Hi!
>
> actually I want to use a readback registers. But i could not find any
> example to use it.
>
> I looked into the serial_io.v and the setting_reg.v file. but could
> not make out how exactly it could be used.
>
> the serial_io module has a input [31:0] readback. Can that be the
> output wires 'out' of the setting_reg module with setting the addr as
> the Reg number.
>
> for eg.
>
> setting_reg #(`FR_USER_1) read_back(.clock(clk),
> .reset(reset),
> .strobe(strobe),
> .addr(serial_addr),
> .in(serial_data),
> .out(read_back));// this read_back is connectedt o read_back_0 of
> serial_io module
>
> Please let me know,
> thanks in advance,
>
> amit.
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
--
Matt Ettus <address@hidden>