[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] error in usrp
From: |
Tushar Patel |
Subject: |
[Discuss-gnuradio] error in usrp |
Date: |
Mon, 19 Jan 2009 09:17:12 +0100 |
I am very new with gnuradio and linux system so if my question may be
sense less
But if possibel help me
when I try to connect usrp board with usb, the LED on USB board do not
flash with 1hz so, when I checked for two files
usrp_firmware.ihx and usrp_fpga.rbf are not present in
/usr/local/share/usrp/rev2
I got the usrp_fpga.rbf from source and I copied over the above
destination.
But I do not find any file for usrp_firmware.ihx, do anybody find it
please help me
I also got the latest gnu tar and try to install the usrp from that.
by following the procedur in ./bootstrap i got the following message
address@hidden:~/Desktop/usrp$ ./bootstrap
firmware/lib/Makefile.am:60: `%'-style pattern rules are a GNU make
extension
firmware/lib/Makefile.am:63: `%'-style pattern rules are a GNU make
extension
firmware/src/usrp2/Makefile.am:90: `%'-style pattern rules are a GNU
make extension
firmware/src/usrp2/Makefile.am:94: `%'-style pattern rules are a GNU
make extension
then i run the
address@hidden:~/Desktop/usrp$ ./configure
its output is
checking sdcc_version "2.7.0"... 2.7.0
configure: creating ./config.status
config.status: creating Makefile
config.status: creating usrp.pc
config.status: creating usrp.iss
config.status: creating config/Makefile
config.status: creating doc/Doxyfile
config.status: creating doc/Makefile
config.status: creating doc/other/Makefile
config.status: creating host/Makefile
config.status: creating host/misc/Makefile
config.status: creating host/lib/Makefile
config.status: creating host/lib/std_paths.h
config.status: creating host/swig/Makefile
config.status: creating host/apps/Makefile
config.status: creating firmware/Makefile
config.status: creating firmware/include/Makefile
config.status: creating firmware/lib/Makefile
config.status: creating firmware/src/Makefile
config.status: creating firmware/src/common/Makefile
config.status: creating firmware/src/usrp2/Makefile
config.status: creating fpga/Makefile
config.status: creating fpga/rbf/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
then I give the make
address@hidden:~/Desktop/usrp$make
it gives the error
make all-recursive
make[1]: Entering directory `/home/jars/Desktop/usrp'
Making all in config
make[2]: Entering directory `/home/jars/Desktop/usrp/config'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/jars/Desktop/usrp/config'
Making all in host
make[2]: Entering directory `/home/jars/Desktop/usrp/host'
Making all in misc
make[3]: Entering directory `/home/jars/Desktop/usrp/host/misc'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/jars/Desktop/usrp/host/misc'
Making all in lib
make[3]: Entering directory `/home/jars/Desktop/usrp/host/lib'
make all-am
make[4]: Entering directory `/home/jars/Desktop/usrp/host/lib'
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H
-I. -I../.. -I../../host/lib -I../../firmware/include -g -O2 -Wall
-Woverloaded-virtual -MT usrp_prims.lo -MD -MP -MF .deps/usrp_prims.Tpo
-c -o usrp_prims.lo usrp_prims.cc
g++ -DHAVE_CONFIG_H -I. -I../.. -I../../host/lib
-I../../firmware/include -g -O2 -Wall -Woverloaded-virtual -MT
usrp_prims.lo -MD -MP -MF .deps/usrp_prims.Tpo -c usrp_prims.cc -fPIC
-DPIC -o .libs/usrp_prims.o
usrp_prims.cc:61: warning: deprecated conversion from string constant to
‘char*’
usrp_prims.cc:62: warning: deprecated conversion from string constant to
‘char*’
In file included from usrp_prims.cc:64:
std_paths.h:27: warning: deprecated conversion from string constant to
‘char*’
std_paths.h:27: warning: deprecated conversion from string constant to
‘char*’
g++ -DHAVE_CONFIG_H -I. -I../.. -I../../host/lib
-I../../firmware/include -g -O2 -Wall -Woverloaded-virtual -MT
usrp_prims.lo -MD -MP -MF .deps/usrp_prims.Tpo -c usrp_prims.cc -o
usrp_prims.o >/dev/null 2>&1
mv -f .deps/usrp_prims.Tpo .deps/usrp_prims.Plo
/bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H
-I. -I../.. -I../../host/lib -I../../firmware/include -g -O2 -Wall
-Woverloaded-virtual -MT fusb_linux.lo -MD -MP -MF .deps/fusb_linux.Tpo
-c -o fusb_linux.lo fusb_linux.cc
g++ -DHAVE_CONFIG_H -I. -I../.. -I../../host/lib
-I../../firmware/include -g -O2 -Wall -Woverloaded-virtual -MT
fusb_linux.lo -MD -MP -MF .deps/fusb_linux.Tpo -c fusb_linux.cc -fPIC
-DPIC -o .libs/fusb_linux.o
fusb_linux.cc:30:28: error: linux/compiler.h: No such file or directory
make[4]: *** [fusb_linux.lo] Error 1
make[4]: Leaving directory `/home/jars/Desktop/usrp/host/lib'
make[3]: *** [all] Error 2
make[3]: Leaving directory `/home/jars/Desktop/usrp/host/lib'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/jars/Desktop/usrp/host'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/jars/Desktop/usrp'
make: *** [all] Error 2
then it will make error in make check and make install also
so if anybody have any idea please help me.
--
Posted via http://www.ruby-forum.com/.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] error in usrp,
Tushar Patel <=