[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1
From: |
William Sherman |
Subject: |
[Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1 |
Date: |
Wed, 24 Jun 2009 06:09:55 +0200 |
I would also like to report that when running
>>> � $ usrp_sigggen.py -f 2.45G --const -a 8000
I get a big peak at 2.58GHz when looking at the plug connected to subdev
(0,0) on the spectrum analyzer, and a smaller peak at 2.58Ghz when
looking at (0,1). The mux setting the program automatically uses is: mux
= 0x89
--
Posted via http://www.ruby-forum.com/.
- [Discuss-gnuradio] Re: xcvr2450, v3.2 and usrp1, (continued)
- [Discuss-gnuradio] Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/17
- [Discuss-gnuradio] Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/22
- Re: [Discuss-gnuradio] Re: xcvr2450, v3.2 and usrp1, Eric Blossom, 2009/06/22
- [Discuss-gnuradio] Re: Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/22
- Re: [Discuss-gnuradio] Re: Re: xcvr2450, v3.2 and usrp1, Johnathan Corgan, 2009/06/22
- Re: [Discuss-gnuradio] Re: Re: xcvr2450, v3.2 and usrp1, Johnathan Corgan, 2009/06/23
- Re: [Discuss-gnuradio] Re: Re: xcvr2450, v3.2 and usrp1, Johnathan Corgan, 2009/06/23
- [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/23
- Re: [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1, Johnathan Corgan, 2009/06/23
- [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/23
- [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1,
William Sherman <=
- [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1, William Sherman, 2009/06/25
- Re: [Discuss-gnuradio] Re: Re: Re: xcvr2450, v3.2 and usrp1, Johnathan Corgan, 2009/06/29