[Discuss-gnuradio] gnuradio 3.2.2 make errors - usrp and usrp2

[Edward Brabant]

     When I do a "make" for gnuradio 3.2.2, the following errors occur when building usrp and usrp2 targets:

1. usrp errors - "Command not found"

make[4]: Entering directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware/lib'                                                                 
I../../../usrp/firmware/include  -c delay.c -o delay.rel                               
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [delay.rel] Error 127 (ignored)                                               
I../../../usrp/firmware/include  -c fx2utils.c -o fx2utils.rel                         
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [fx2utils.rel] Error 127 (ignored)                                            
I../../../usrp/firmware/include  -c i2c.c -o i2c.rel                                   
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [i2c.rel] Error 127 (ignored)                                                 
I../../../usrp/firmware/include  -c isr.c -o isr.rel                                   
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [isr.rel] Error 127 (ignored)                                                 
I../../../usrp/firmware/include  -c timer.c -o timer.rel                               
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [timer.rel] Error 127 (ignored)                                               
I../../../usrp/firmware/include  -c usb_common.c -o usb_common.rel                     
make[4]: I../../../usrp/firmware/include: Command not found                            
make[4]: [usb_common.rel] Error 127 (ignored)                                          

2. usrp2 errors - "<u> undefined symbol encountered during assembly"

make[5]: Entering directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware/src/usrp2'
test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' .
test -f ../common/`basename 'eeprom_boot.a51'` -o \
                \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \
                || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'`
/usr/local/bin/sdas8051 `basename 'eeprom_boot.a51'`
eeprom_boot.a51:553: Error: <u> undefined symbol encountered during assembly
removing
make[5]: *** [eeprom_boot.rel] Error 2
make[5]: Leaving directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware/src/usrp2'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2'
make: *** [all] Error 2
------------------------------------------------------------
     The above errors occurred after I commented out line 51 in config/grc_usrp.m4 ("USRP_SDCC([2.4.0],[],[passed=no;AC_MSG_RESULT([Unable to find firmware compiler SDCC.])])") to resolve the following error during a previous execution of "make" for gnuradio:

          make[4]: Entering directory `/home/brabante/devel/gnuradio/gnuradio-3.2.2/usrp/firmware/lib'
          /usr/local/bin/sdcc -I../../../usrp/firmware/include  -c delay.c -o delay.rel
          delay.c:27: syntax error: token -> '_naked' ; column 21
          make[4]: *** [delay.rel] Error 1

This change was made per the recommendation in the email from Tom Rondeau (Mon, 22 Nov 2010 18:20:12 -0500, URL http://lists.gnu.org/archive/html/discuss-gnuradio/2010-11/msg00456.html).
--------------------
     The following covers the steps I executed in attempting to install gnuradio-3.2.2.tar.bz.
     I ran the gnuradio 3.2.2 "bootstrap" script.
     I then ran the gnuradio 3.2.2 "configure" script with the following arguments:

          --disable-all-components --with-gruel --enable-gnuradio-core --enable-usrp --enable-gr-usrp --enable-omnithread

>Before< the edit to config/grc_usrp.m4 described above, the console output of the configure is attached in "config_before_edit_grc_usrp_m4.console",
the log output of the configure is attached in "config_before_edit_grc_usrp_m4.log" and the console output of the make is attached in
"make_before_edit_grc_usrp_m4.console".
>After< the edit to config/grc_usrp.m4 described above, the console output of the configure is attached in "config_after_edit_grc_usrp_m4.console", the log output of the configure is attached in "config_after_edit_grc_usrp_m4.log" and the console output of the make is attached in
"make_after_edit_grc_usrp_m4.console".

     gnuradio depends on SDCC (Small Device C Compiler).  I had to build that from source, since no binary distribution for CentOS 6.3 x86_64 exists.
The "configure" script, "make" and "make install" for SDCC executed without errors and were passed no arguments.

     This is on CentOS 6.3 on an x86_64 architecture.

     Environment variables relevant to gnuradio 3.2.2 set in my login session are:
          export LD_LIBRARY_PATH=/lib64:/usr/lib64:/usr/local/lib64:/usr/local/lib

          # PKG_CONFIG_PATH is for the gnuradio-3.2.2 configure script to find fftw3.pc,
          # fftw3f.pc and fftw3l.pc in /usr/lib64/pkgconfig/
          export PKG_CONFIG_PATH=/usr/lib64/pkgconfig:/usr/local/lib64/pkgconfig

          export SDCC_HOME=/usr/local

          # XAS is for the gnuradio-3.2.2 configure script to find the SDCC 8051 assembler.
          # GNU Radio refers to this assembler as "asx8051", the old name.  SDCC v3.0.0
          # renamed this assembler "sdas8051"
          export XAS=/usr/local/bin/sdas8051

          export PYTHONPATH=/usr/local/lib64/python2.6/site-packages

--------------------
     If anyone knows how to resolve the usrp and usrp2 problems in the "make" of gnuradio 3.2.2 listed at the top, I'd appreciate a reply.

Regards,
Ed Brabant, Contractor
SPAWAR (Space and Naval Warfare Systems Command) Systems Center (SSC) Pacific
Joint Tactical Networking Center (JTNC), Technical Directorate (TD), Standards Group
office: 619-767-4397

config_before_edit_grc_usrp_m4.console
Description: config_before_edit_grc_usrp_m4.console

config_before_edit_grc_usrp_m4.log
Description: config_before_edit_grc_usrp_m4.log

make_before_edit_grc_usrp_m4.console
Description: make_before_edit_grc_usrp_m4.console

config_after_edit_grc_usrp_m4.console
Description: config_after_edit_grc_usrp_m4.console

config_after_edit_grc_usrp_m4.log
Description: config_after_edit_grc_usrp_m4.log

make_after_edit_grc_usrp_m4.console
Description: make_after_edit_grc_usrp_m4.console