[Discuss-gnuradio] Again bladerf / gqrx / gr-osmosdr

[Ralph A. Schmid, dk5ras]

Hi,

With latest versions of GR / bladerf / gqrx / gr-osmosdr again something is
stuck. Gqrx does not work anymore, I get the following error during make:


/usr/local/lib/libgnuradio-osmosdr.so: undefined reference to
`bladerf_fpga_version'
/usr/local/lib/libgnuradio-osmosdr.so: undefined reference to
`bladerf_fw_version'
collect2: ld returned 1 exit status
make: *** [gqrx] Error 1
address@hidden:~/gqrx$ make
g++ -Wl,-O1 -o gqrx main.o mainwindow.o receiver.o cafsk12.o costabf.o
agc_impl.o correct_iq_cc.o lpf.o resampler_xx.o rx_demod_am.o rx_demod_fm.o
rx_fft.o rx_filter.o rx_meter.o rx_agc_xx.o rx_noise_blanker_cc.o
sniffer_f.o stereo_demod.o afsk1200win.o agc_options.o audio_options.o
demod_options.o dockinputctl.o dockaudio.o dockfft.o dockiqplayer.o
dockrxopt.o freqctrl.o ioconfig.o meter.o nb_options.o plotter.o
qtcolorpicker.o nbrx.o receiver_base.o wfmrx.o pa_device_list.o pa_sink.o
pa_source.o moc_mainwindow.o moc_cafsk12.o moc_afsk1200win.o
moc_agc_options.o moc_audio_options.o moc_demod_options.o moc_dockaudio.o
moc_dockfft.o moc_dockinputctl.o moc_dockiqplayer.o moc_dockrxopt.o
moc_freqctrl.o moc_ioconfig.o moc_meter.o moc_nb_options.o moc_plotter.o
moc_qtcolorpicker.o qrc_icons.o    -L/usr/lib/i386-linux-gnu -lboost_system
-lboost_program_options -lrt -lpulse-simple -lpulse -L/usr/local/lib
-lgnuradio-analog -lgnuradio-filter -lgnuradio-fft -lgnuradio-osmosdr
-lgnuradio-blocks -lgnuradio-runtime -lgnuradio-pmt -lQtSvg -lQtGui -lQtCore
-lpthread 
/usr/local/lib/libgnuradio-osmosdr.so: undefined reference to
`bladerf_fpga_version'
/usr/local/lib/libgnuradio-osmosdr.so: undefined reference to
`bladerf_fw_version'
collect2: ld returned 1 exit status
make: *** [gqrx] Error 1
address@hidden:~/gqrx$


When trying to run the previously built gqrx:

gqrx 
linux; GNU C++ version 4.6.3; Boost_104800; UHD_003.005.003-164-g0c5099ab

gr-osmosdr v0.1.0-13-g9b41c6aa (0.1.1git) gnuradio 3.7.2git-43-g9792b280
built-in source types: file fcd rtl rtl_tcp uhd bladerf 
Using Volk machine: avx_32_mmx_orc
QLayout: Attempting to add QLayout "" to DockInputCtl "DockInputCtl", which
already has a layout
gr-osmosdr v0.1.0-13-g9b41c6aa (0.1.1git) gnuradio 3.7.2git-43-g9792b280
built-in source types: file fcd rtl rtl_tcp uhd bladerf 
[INFO] Instance: 0
[INFO] Found a bladeRF
[INFO] Claimed all inferfaces successfully
[INFO] Change to alternate interface 1
[INFO] Changed into RF link mode: LIBUSB_SUCCESS
[WARNING] Could not extract serial number
[WARNING] Could not extract VCTCXO trim value
[WARNING] Could not extract FPGA size
Using nuand LLC bladeRF #0 SN 8efd2b30699e61bec690a0b37cc5ad57gqrx: symbol
lookup error: /usr/local/lib/libgnuradio-osmosdr-0.1.1git.so.0.0.0:
undefined symbol: bladerf_fw_version
address@hidden:~/gqrx$

Any ideas out there? :)

Ralph.



--

Ralph A. Schmid
Mondstr. 10
90762 Fürth
+49-171-3631223
address@hidden
http://www.bclog.de/