Hi,
These are the output of the commands:
PC1:
enp0s31f6 Link encap:Ethernet HWaddr f4:8e:38:b3:42:db
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19 Memory:f7e80000-f7ea0000
enp5s0 Link encap:Ethernet HWaddr 00:0a:f7:93:1a:93
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:8305 errors:0 dropped:0 overruns:0 frame:0
TX packets:8305 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:617488 (617.4 KB) TX bytes:617488 (617.4 KB)
tap0 Link encap:Ethernet HWaddr 02:89:56:03:96:e1
inet addr:192.168.200.1 Bcast:192.168.200.255 Mask:255.255.255.0
inet6 addr: fe80::89:56ff:fe03:96e1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:10000 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:732 (732.0 B)
PC2:
enp0s31f6 Link encap:Ethernet HWaddr d4:81:d7:9b:de:e5
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:16 Memory:ef300000-ef320000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1428 errors:0 dropped:0 overruns:0 frame:0
TX packets:1428 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:108539 (108.5 KB) TX bytes:108539 (108.5 KB)
tap0 Link encap:Ethernet HWaddr 86:2f:2a:03:4c:35
inet addr:192.168.200.10 Bcast:192.168.200.255 Mask:255.255.255.0
inet6 addr: fe80::842f:2aff:fe03:4c35/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:10000 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:732 (732.0 B)
wlp2s0 Link encap:Ethernet HWaddr 14:ab:c5:3c:96:73
inet6 addr: fe80::2c1a:98d8:1f9f:9d23/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:618 errors:0 dropped:0 overruns:0 frame:0
TX packets:128 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:75975 (75.9 KB) TX bytes:14759 (14.7 KB)
I also noticed something odd.
When I run the flowgraph on the machines. Tx and Rx LEDs are one on both USRPS.
However as soon as I assign an IP Address to the virtual eth cards, the Rx LED on one of the USRPs goes off.
It happens randomly so sometimes it is PC1 side and sometimes PC2.
Cheers.