[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linphone-users] URGENT help
From: |
Karthikeyan S |
Subject: |
[Linphone-users] URGENT help |
Date: |
Thu, 13 Jun 2002 16:26:02 +0530 |
ya i checked that now with the proper sipomatic, Unfortunately am not able
to hear anything.
It says the same -1 bytes written after it was connected. Am using ac'97
intel sound card module.
Pls provide me some directions. I used "sndconfig" to check the soundcard,
the test is success.
I also used "aumix" to increase the volume, but no use.
Thanx and regds
karthik
Is it possible to use any other drivers for the same sound card?
I think 0.8.0 is not interworking with 0.7.1, am not sure, will make sure
that once and send u the report again. Mean while pls help me sound card
related problem.
-----Original Message-----
From: Simon Morlat [mailto:address@hidden
Sent: Thursday,June 13, 2002 12:55 PM
To: address@hidden
Cc: address@hidden
Subject: RE: [Linphone-users] URGENT help
Excuse me for the lo interface: you were right...
I found the bug, it will be corrected in next release.
However I noticed that the version of sipomatic used was not the one of
linphone-0.8.0. The lastest sipomatic should answer those types of SDP
messages:
v=0
o=robot 123456 654321 IN IP4 127.0.0.1
s=A conversation
c=IN IP4 127.0.0.1
t=0 0
m=audio 8888 RTP/AVP 0 8 3 115
c=IN IP4 127.0.0.1
a=rtpmap:pcmu/8000/1
a=rtpmap:pcma/8000/1
a=rtpmap:gsm/8000/1
a=rtpmap:lpc10-15/8000/1
Whereas your version of sipomatic answers sdp messages without a=rtpmap
fields.
Please verify that the sipomatic you are running is not the one of an
older version.
Thank you.
Simon
***************************************************************************
This message is proprietary to Future Software Limited (FSL)
and is intended solely for the use of the individual to whom it
is addressed. It may contain privileged or confidential information
and should not be circulated or used for any purpose other than for
what it is intended.
If you have received this message in error, please notify the
originator immediately. If you are not the intended recipient,
you are notified that you are strictly prohibited from using,
copying, altering, or disclosing the contents of this message.
FSL accepts no responsibility for loss or damage arising from
the use of the information transmitted by this email including
damage from virus.
***************************************************************************
[Linphone-users] URGENT help,
Karthikeyan S <=
RE: [Linphone-users] URGENT help, Simon Morlat, 2002/06/17