[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] URGENT help
From: |
Simon Morlat |
Subject: |
Re: [Linphone-users] URGENT help |
Date: |
13 Jun 2002 14:27:33 +0200 |
It is recommended to use alsa drivers (http://www.alsa-project.org) .
There are many problems with the intel ac97 driver of the linux kernel.
Do it, check that the snd-pcm-oss module is loaded, and then it will
work better. (I have intel ac97 also.)
Simon
Le jeu 13/06/2002 à 12:56, Karthikeyan S a écrit :
>
> ya i checked that now with the proper sipomatic, Unfortunately am not able
> to hear anything.
> It says the same -1 bytes written after it was connected. Am using ac'97
> intel sound card module.
> Pls provide me some directions. I used "sndconfig" to check the soundcard,
> the test is success.
> I also used "aumix" to increase the volume, but no use.
>
>
> Thanx and regds
> karthik
>
> Is it possible to use any other drivers for the same sound card?
> I think 0.8.0 is not interworking with 0.7.1, am not sure, will make sure
> that once and send u the report again. Mean while pls help me sound card
> related problem.
>
>
>
> -----Original Message-----
> From: Simon Morlat [mailto:address@hidden
> Sent: Thursday,June 13, 2002 12:55 PM
> To: address@hidden
> Cc: address@hidden
> Subject: RE: [Linphone-users] URGENT help
>
>
> Excuse me for the lo interface: you were right...
> I found the bug, it will be corrected in next release.
> However I noticed that the version of sipomatic used was not the one of
> linphone-0.8.0. The lastest sipomatic should answer those types of SDP
> messages:
>
> v=0
> o=robot 123456 654321 IN IP4 127.0.0.1
> s=A conversation
> c=IN IP4 127.0.0.1
> t=0 0
> m=audio 8888 RTP/AVP 0 8 3 115
> c=IN IP4 127.0.0.1
> a=rtpmap:pcmu/8000/1
> a=rtpmap:pcma/8000/1
> a=rtpmap:gsm/8000/1
> a=rtpmap:lpc10-15/8000/1
>
> Whereas your version of sipomatic answers sdp messages without a=rtpmap
> fields.
> Please verify that the sipomatic you are running is not the one of an
> older version.
> Thank you.
> Simon
>
> ***************************************************************************
> This message is proprietary to Future Software Limited (FSL)
> and is intended solely for the use of the individual to whom it
> is addressed. It may contain privileged or confidential information
> and should not be circulated or used for any purpose other than for
> what it is intended.
>
> If you have received this message in error, please notify the
> originator immediately. If you are not the intended recipient,
> you are notified that you are strictly prohibited from using,
> copying, altering, or disclosing the contents of this message.
> FSL accepts no responsibility for loss or damage arising from
> the use of the information transmitted by this email including
> damage from virus.
> ***************************************************************************
>
- RE: [Linphone-users] URGENT help, (continued)
RE: [Linphone-users] URGENT help, Karthikeyan S, 2002/06/11
[Linphone-users] URGENT help, Karthikeyan S, 2002/06/13
- Re: [Linphone-users] URGENT help,
Simon Morlat <=
RE: [Linphone-users] URGENT help, Simon Morlat, 2002/06/17