Re: [lwip-users] LPC1769 ethernet problem

[Chris Williams]

Quoting Fotis Panagiotopoulos <address@hidden>:

2 points:

1. Hubs are I think only 10M not 100M, ok if you have speed switching  
working in the processor.

2. I use a 'managed switch'. I use an Edgeiron 2402. I bought for £24  
on ebay (there are lots there at the moment). A big overkill (with 24  
ports!) but you log in and set one of the ports to monitor and it  
copies all the data from port 1 to your monitor port.

Regards,

Chris.



> Aha... HUB... I missed that point... I 'll search for one.
>
>
> *Fotis Panagiotopoulos*
>
>
> *--*
>
> *AMCO S.A.*
>
> 25 Amfiaraou st. PO 10442, Athens, Greece
> Tel: +30 210 5907000 ext. -34 <%2B30%20210%205907000%20ext.%20-36> | Fax: +30
> 210 5912711
> e-mail: address@hidden | web: http://www.amco.gr
>
> On Fri, Jul 29, 2016 at 5:32 PM, Sergio R. Caprile <address@hidden>
> wrote:
>
> > I said I saved (and use) _hubs_; any one will do, they are just repeaters.
> > I don't particularly know of any affordable switch model, maybe you have
> > more luck hunting for a hub.
> >
> > On Fri, Jul 29, 2016 at 9:47 AM, Sergio R. Caprile <address@hidden>
> > wrote:
> >
> > > Sorry, I saved one or two hubs for this very purpose. I guess you are a
> > > bit too far for lending...
> > > You'll have to go hunting down one of these beasts.
> > > Meanwhile, can you double check and/or post your network config ? Maybe
> > > you overlooked a mask or address:
> > > lwIP address, mask, gateway
> > > router address (should be = to gateway above...), mask
> > > local PC address, mask, gateway
> > > destination server address
> >
> > _______________________________________________
> > lwip-users mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/lwip-users



--
---------------------------------------------------------------------------
| Chris Williams    EMail address@hidden                            |
|                   Web www.chrydesn.co.uk                                |
|                   Tel/Fax  01686 688065                                 |
| Chrysalis Design. Electronics, Computers, Hardware, Software.           |
|                   Design and development to meet all your needs.        |
---------------------------------------------------------------------------