[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [monit] monit and active/passive

From: Martin Pala
Subject: Re: [monit] monit and active/passive
Date: Sun, 13 Sep 2009 22:47:18 +0200


can you run monit like this and check output?:

  monit -vIc <pathtomonitconfiguration>

It will dump parsed configuration on the beginning.

The passive mode means, that the service is monitored, but not restarted ... are you sure it is in passive mode? Isn't it just unmonitored?


On Sep 13, 2009, at 9:32 PM, Frank wrote:

I have 2 exactly same monitrc files..
One is active other stays stuck in passive mode...
Any idea why ?
set daemon 60
set logfile /var/log/monit.log
set mailserver
set httpd port 9999
set eventqueue basedir /var/monit/ slots 1000
#following line has been rewritten for the list ;)
set mmonit http://user:address@hidden:myport/collector
# Freeswitch
check process freeswitch with pidfile "/usr/local/freeswitch/log/"
start program "/usr/bin/screen -d -m /usr/local/freeswitch/bin/freeswitch"
#start program "/usr/bin/screen -S freeswitch -d -m /usr/local/freeswitch/bin/freeswitch -nf"
stop program "/usr/local/freeswitch/bin/freeswitch -stop"
if totalmem > 140.0 MB then alert
if totalmem > 180.0 MB for 3 cycles then restart
# Checks sip port on localhost, not always suitable
# if failed port 5060 type UDP then restart
# Checks mod_event_socket on localhost. Maybe more suitable
#if failed port 8021 type TCP then restart
if 5 restarts within 5 cycles then timeout
alert address@hidden
mode active
To unsubscribe:

reply via email to

[Prev in Thread] Current Thread [Next in Thread]