[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Problems : start action status is always "failed to start" when chec
From: |
kenichi.futatsumori |
Subject: |
RE: Problems : start action status is always "failed to start" when check process with matching |
Date: |
Tue, 8 Mar 2011 12:05:48 +0900 |
I added "with timeout" parameter, but no changes.
My process "a" is up within 10 sec.
Maybe nothing to relate timeout and this problem in my case.
Watching monit.log, I found debug entry. What's happen ?
[JST Mar 8 11:54:57] info : start service 'a' on user request
[JST Mar 8 11:54:57] info : monit daemon at 1360 awakened
[JST Mar 8 11:54:57] info : Awakened by User defined signal 1
[JST Mar 8 11:54:57] info : 'a' start: /sbin/service
[JST Mar 8 11:55:27] error : 'a' failed to start
[JST Mar 8 11:55:27] debug :
-------------------------------------------------------------------------------
[JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8053cce]
[JST Mar 8 11:55:27] debug : /usr/bin/monit(LogError+0x22) [0x8054092]
[JST Mar 8 11:55:27] debug : /usr/bin/monit(Event_post+0x382)
[0x80517f2]
[JST Mar 8 11:55:27] debug : /usr/bin/monit [0x804f718]
[JST Mar 8 11:55:27] debug : /usr/bin/monit(control_service+0xbb)
[0x804f90b]
[JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8064368]
[JST Mar 8 11:55:27] debug : /usr/bin/monit(validate+0x78) [0x8064448]
[JST Mar 8 11:55:27] debug : /usr/bin/monit [0x8056005]
[JST Mar 8 11:55:27] debug : /usr/bin/monit(main+0x524) [0x80568c4]
[JST Mar 8 11:55:27] debug :
/lib/i686/nosegneg/libc.so.6(__libc_start_main+0xdc) [0x190e8c]
[JST Mar 8 11:55:27] debug : /usr/bin/monit [0x804e8e1]
[JST Mar 8 11:55:27] debug :
-------------------------------------------------------------------------------
[JST Mar 8 11:55:27] debug : Execution failed notification is sent to
address@hidden<--sorry,confidential
[JST Mar 8 11:55:27] debug : Monitoring enabled -- service a
Thanks.
Kenichi Futatsumori in Japan.
> -----Original Message-----
> From:
> address@hidden
> org
> [mailto:monit-general-bounces+kenichi.futatsumori=unisys.co.jp
> @nongnu.org] On Behalf Of Patrick Viola
> Sent: Friday, March 04, 2011 8:25 PM
> To: This is the general mailing list for monit
> Subject: Antwort: Problems : start action status is always
> "failed to start" when check process with matching
>
> I have had the same problem with two of my processes. I get
> rid of the messages with a timeout.
>
> May your process needs some time to stop or start?
> Try to add a timeout behind your stop / start command.
>
> start program = "/sbin/service aaa start" with timeout 20 seconds
>
>
>
> Mit freundlichen Grüßen
> Patrick Viola
> Projektentwicklung Business Information
>
> Tel: +49 2152 143 - 439, Fax: +49 2152 44 47
> E-Mail: address@hidden, Lotus Notes: Patrick address@hidden
>
> GEDAK - Gesellschaft für Datenverarbeitung und Kommunikation
> mbH Mülhauser Str. 157 · D-47906 Kempen, Geschäftsführer:
> Bernd Kothes Amtsgericht Krefeld HRB 9087, Steuer-Nr.
> 115/5715/0137, USt.-ID DE119998337
>
> www.gedak.de
>
>
>
> Von: <address@hidden>
> An: <address@hidden>
> Datum: 04.03.2011 08:08
> Betreff: Problems : start action status is always
> "failed to start" when check process with matching
> Gesendet von: address@hidden
>
> ________________________________
>
>
>
>
> Hi,
>
> I am trying to use monit for monitoring a process.
> A process doesn't create pid file, so I would like to use
> matching option.
> (monit is version 5.2.4 on linux.)
>
> check process aaa with matching "aaa"
> start = "/sbin/service aaa start"
> stop = "/sbin/service aaa stop"
>
>
> # monit start aaa
>
> The process "aaa" is running but monit's service status is
> always "Execution failed",
> and I recieved a mail. And "failed to start" was put syslog.
>
> And "monit procmatch" is OK.
>
> Why ?
>
> # monit status
> ....
> Process 'aaa'
> status Execution failed
> monitoring status monitored
> pid 15376 <--- but process
> is running !
> parent pid 1
> uptime 1m
> children 17
> memory kilobytes 2232
> memory kilobytes total 68428
> memory percent 0.1%
> memory percent total 3.2%
> cpu percent 0.0%
> cpu percent total 0.0%
> data collected Fri Mar 1 16:02:33 2011
>
>
> Thanks.
>
> Kenichi in Japan.
>
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general
> <http://lists.nongnu.org/mailman/listinfo/monit-general>
>
>
>
- Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/04
- Re: Problems : start action status is always "failed to start" when check process with matching, James A R Brown, 2011/03/04
- Antwort: Problems : start action status is always "failed to start" when check process with matching, Patrick Viola, 2011/03/04
- RE: Problems : start action status is always "failed to start" when check process with matching,
kenichi.futatsumori <=
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/08
- Re: Problems : start action status is always "failed to start" when check process with matching, Mike Schmidt, 2011/03/08
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/10
- Re: Problems : start action status is always "failed to start" when check process with matching, Jan-Henrik Haukeland, 2011/03/10
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/17
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/18
- Re: Problems : start action status is always "failed to start" when check process with matching, Martin Pala, 2011/03/21
- RE: Problems : start action status is always "failed to start" when check process with matching, kenichi.futatsumori, 2011/03/21