[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 09/12] mirror: switch mirror_iteration to AIO
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PATCH v2 09/12] mirror: switch mirror_iteration to AIO |
Date: |
Wed, 16 Jan 2013 18:31:16 +0100 |
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target. However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.
Signed-off-by: Paolo Bonzini <address@hidden>
---
block/mirror.c | 155 ++++++++++++++++++++++++++++++++++++++++++--------------
trace-events | 2 +
2 files changed, 119 insertions(+), 38 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index ab41340..75c550a 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -33,8 +33,19 @@ typedef struct MirrorBlockJob {
unsigned long *cow_bitmap;
HBitmapIter hbi;
uint8_t *buf;
+
+ int in_flight;
+ int ret;
} MirrorBlockJob;
+typedef struct MirrorOp {
+ MirrorBlockJob *s;
+ QEMUIOVector qiov;
+ struct iovec iov;
+ int64_t sector_num;
+ int nb_sectors;
+} MirrorOp;
+
static BlockErrorAction mirror_error_action(MirrorBlockJob *s, bool read,
int error)
{
@@ -48,15 +59,60 @@ static BlockErrorAction mirror_error_action(MirrorBlockJob
*s, bool read,
}
}
-static int coroutine_fn mirror_iteration(MirrorBlockJob *s,
- BlockErrorAction *p_action)
+static void mirror_iteration_done(MirrorOp *op)
+{
+ MirrorBlockJob *s = op->s;
+
+ s->in_flight--;
+ trace_mirror_iteration_done(s, op->sector_num, op->nb_sectors);
+ g_slice_free(MirrorOp, op);
+ qemu_coroutine_enter(s->common.co, NULL);
+}
+
+static void mirror_write_complete(void *opaque, int ret)
+{
+ MirrorOp *op = opaque;
+ MirrorBlockJob *s = op->s;
+ if (ret < 0) {
+ BlockDriverState *source = s->common.bs;
+ BlockErrorAction action;
+
+ bdrv_set_dirty(source, op->sector_num, op->nb_sectors);
+ action = mirror_error_action(s, false, -ret);
+ if (action == BDRV_ACTION_REPORT && s->ret >= 0) {
+ s->ret = ret;
+ }
+ }
+ mirror_iteration_done(op);
+}
+
+static void mirror_read_complete(void *opaque, int ret)
+{
+ MirrorOp *op = opaque;
+ MirrorBlockJob *s = op->s;
+ if (ret < 0) {
+ BlockDriverState *source = s->common.bs;
+ BlockErrorAction action;
+
+ bdrv_set_dirty(source, op->sector_num, op->nb_sectors);
+ action = mirror_error_action(s, true, -ret);
+ if (action == BDRV_ACTION_REPORT && s->ret >= 0) {
+ s->ret = ret;
+ }
+
+ mirror_iteration_done(op);
+ return;
+ }
+ bdrv_aio_writev(s->target, op->sector_num, &op->qiov, op->nb_sectors,
+ mirror_write_complete, op);
+}
+
+static void coroutine_fn mirror_iteration(MirrorBlockJob *s)
{
BlockDriverState *source = s->common.bs;
- BlockDriverState *target = s->target;
- QEMUIOVector qiov;
- int ret, nb_sectors, nb_sectors_chunk;
+ int nb_sectors, nb_sectors_chunk;
int64_t end, sector_num, cluster_num;
- struct iovec iov;
+ MirrorOp *op;
s->sector_num = hbitmap_iter_next(&s->hbi);
if (s->sector_num < 0) {
@@ -87,31 +143,30 @@ static int coroutine_fn mirror_iteration(MirrorBlockJob *s,
end = s->common.len >> BDRV_SECTOR_BITS;
nb_sectors = MIN(nb_sectors, end - sector_num);
+
+ /* Allocate a MirrorOp that is used as an AIO callback. */
+ op = g_slice_new(MirrorOp);
+ op->s = s;
+ op->iov.iov_base = s->buf;
+ op->iov.iov_len = nb_sectors * 512;
+ op->sector_num = sector_num;
+ op->nb_sectors = nb_sectors;
+ qemu_iovec_init_external(&op->qiov, &op->iov, 1);
+
bdrv_reset_dirty(source, sector_num, nb_sectors);
/* Copy the dirty cluster. */
- iov.iov_base = s->buf;
- iov.iov_len = nb_sectors * 512;
- qemu_iovec_init_external(&qiov, &iov, 1);
-
+ s->in_flight++;
trace_mirror_one_iteration(s, sector_num, nb_sectors);
- ret = bdrv_co_readv(source, sector_num, nb_sectors, &qiov);
- if (ret < 0) {
- *p_action = mirror_error_action(s, true, -ret);
- goto fail;
- }
- ret = bdrv_co_writev(target, sector_num, nb_sectors, &qiov);
- if (ret < 0) {
- *p_action = mirror_error_action(s, false, -ret);
- s->synced = false;
- goto fail;
- }
- return 0;
+ bdrv_aio_readv(source, sector_num, &op->qiov, nb_sectors,
+ mirror_read_complete, op);
+}
-fail:
- /* Try again later. */
- bdrv_set_dirty(source, sector_num, nb_sectors);
- return ret;
+static void mirror_drain(MirrorBlockJob *s)
+{
+ while (s->in_flight > 0) {
+ qemu_coroutine_yield();
+ }
}
static void coroutine_fn mirror_run(void *opaque)
@@ -119,6 +174,7 @@ static void coroutine_fn mirror_run(void *opaque)
MirrorBlockJob *s = opaque;
BlockDriverState *bs = s->common.bs;
int64_t sector_num, end, nb_sectors_chunk, length;
+ uint64_t last_pause_ns;
BlockDriverInfo bdi;
char backing_filename[1024];
int ret = 0;
@@ -177,28 +233,43 @@ static void coroutine_fn mirror_run(void *opaque)
}
bdrv_dirty_iter_init(bs, &s->hbi);
+ last_pause_ns = qemu_get_clock_ns(rt_clock);
for (;;) {
uint64_t delay_ns;
int64_t cnt;
bool should_complete;
+ if (s->ret < 0) {
+ ret = s->ret;
+ break;
+ }
+
cnt = bdrv_get_dirty_count(bs);
- if (cnt != 0) {
- BlockErrorAction action = BDRV_ACTION_REPORT;
- ret = mirror_iteration(s, &action);
- if (ret < 0 && action == BDRV_ACTION_REPORT) {
- goto immediate_exit;
+
+ /* Note that even when no rate limit is applied we need to yield
+ * periodically with no pending I/O so that qemu_aio_flush() returns.
+ * We do so every SLICE_TIME milliseconds, or when there is an error,
+ * or when the source is clean, whichever comes first.
+ */
+ if (qemu_get_clock_ns(rt_clock) - last_pause_ns < SLICE_TIME &&
+ s->common.iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
+ if (s->in_flight > 0) {
+ trace_mirror_yield(s, s->in_flight, cnt);
+ qemu_coroutine_yield();
+ continue;
+ } else if (cnt != 0) {
+ mirror_iteration(s);
+ continue;
}
- cnt = bdrv_get_dirty_count(bs);
}
should_complete = false;
- if (cnt == 0) {
+ if (s->in_flight == 0 && cnt == 0) {
trace_mirror_before_flush(s);
ret = bdrv_flush(s->target);
if (ret < 0) {
if (mirror_error_action(s, false, -ret) == BDRV_ACTION_REPORT)
{
- goto immediate_exit;
+ break;
}
} else {
/* We're out of the streaming phase. From now on, if the job
@@ -244,15 +315,12 @@ static void coroutine_fn mirror_run(void *opaque)
delay_ns = 0;
}
- /* Note that even when no rate limit is applied we need to yield
- * with no pending I/O here so that bdrv_drain_all() returns.
- */
block_job_sleep_ns(&s->common, rt_clock, delay_ns);
if (block_job_is_cancelled(&s->common)) {
break;
}
} else if (!should_complete) {
- delay_ns = (cnt == 0 ? SLICE_TIME : 0);
+ delay_ns = (s->in_flight == 0 && cnt == 0 ? SLICE_TIME : 0);
block_job_sleep_ns(&s->common, rt_clock, delay_ns);
} else if (cnt == 0) {
/* The two disks are in sync. Exit and report successful
@@ -262,9 +330,20 @@ static void coroutine_fn mirror_run(void *opaque)
s->common.cancelled = false;
break;
}
+ last_pause_ns = qemu_get_clock_ns(rt_clock);
}
immediate_exit:
+ if (s->in_flight > 0) {
+ /* We get here only if something went wrong. Either the job failed,
+ * or it was cancelled prematurely so that we do not guarantee that
+ * the target is a copy of the source.
+ */
+ assert(ret < 0 || (!s->synced && block_job_is_cancelled(&s->common)));
+ mirror_drain(s);
+ }
+
+ assert(s->in_flight == 0);
qemu_vfree(s->buf);
g_free(s->cow_bitmap);
bdrv_set_dirty_tracking(bs, 0);
diff --git a/trace-events b/trace-events
index b0a8085..4427d1f 100644
--- a/trace-events
+++ b/trace-events
@@ -85,6 +85,8 @@ mirror_before_drain(void *s, int64_t cnt) "s %p dirty count
%"PRId64
mirror_before_sleep(void *s, int64_t cnt, int synced) "s %p dirty count
%"PRId64" synced %d"
mirror_one_iteration(void *s, int64_t sector_num, int nb_sectors) "s %p
sector_num %"PRId64" nb_sectors %d"
mirror_cow(void *s, int64_t sector_num) "s %p sector_num %"PRId64
+mirror_iteration_done(void *s, int64_t sector_num, int nb_sectors) "s %p
sector_num %"PRId64" nb_sectors %d"
+mirror_yield(void *s, int64_t cnt, int in_flight) "s %p dirty count %"PRId64"
in_flight %d"
# blockdev.c
qmp_block_job_cancel(void *job) "job %p"
--
1.7.1
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, (continued)
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, Paolo Bonzini, 2013/01/18
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, Kevin Wolf, 2013/01/18
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, Paolo Bonzini, 2013/01/18
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, Kevin Wolf, 2013/01/21
- Re: [Qemu-devel] [PATCH v2 05/12] mirror: perform COW if the cluster size is bigger than the granularity, Paolo Bonzini, 2013/01/21
[Qemu-devel] [PATCH v2 07/12] block: allow customizing the granularity of the dirty bitmap, Paolo Bonzini, 2013/01/16
[Qemu-devel] [PATCH v2 08/12] mirror: allow customizing the granularity, Paolo Bonzini, 2013/01/16
[Qemu-devel] [PATCH v2 09/12] mirror: switch mirror_iteration to AIO,
Paolo Bonzini <=
[Qemu-devel] [PATCH v2 10/12] mirror: add buf-size argument to drive-mirror, Paolo Bonzini, 2013/01/16
[Qemu-devel] [PATCH v2 11/12] mirror: support more than one in-flight AIO operation, Paolo Bonzini, 2013/01/16
[Qemu-devel] [PATCH v2 12/12] mirror: support arbitrarily-sized iterations, Paolo Bonzini, 2013/01/16
[Qemu-devel] [PATCH v2 06/12] block: return count of dirty sectors, not chunks, Paolo Bonzini, 2013/01/16