[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a CPU property |
Date: |
Fri, 29 May 2015 16:51:49 +1000 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, May 29, 2015 at 04:31:58PM +1000, Alistair Francis wrote:
> Originally the use-fpu PVR bits were manually set for each machine. This
> is a hassle and difficult to read, instead set them based on the CPU
> properties.
The dt bindings for use-fpu are a bit non-intuivie unfortunately...
Anyway:
Reviewed-by: Edgar E. Iglesias <address@hidden>
>
> Signed-off-by: Alistair Francis <address@hidden>
> Reviewed-by: Peter Crosthwaite <address@hidden>
> ---
> V3:
> - Add comments explaing the FPU levels
> V2:
> - Remove unnecessary declaration of r
> Changes since RFC:
> - Tidy up the if logic
>
> hw/microblaze/petalogix_ml605_mmu.c | 7 +++++--
> target-microblaze/cpu-qom.h | 1 +
> target-microblaze/cpu.c | 13 ++++++++++---
> target-microblaze/translate.c | 10 +++-------
> 4 files changed, 19 insertions(+), 12 deletions(-)
>
> diff --git a/hw/microblaze/petalogix_ml605_mmu.c
> b/hw/microblaze/petalogix_ml605_mmu.c
> index 48c264b..05c120a 100644
> --- a/hw/microblaze/petalogix_ml605_mmu.c
> +++ b/hw/microblaze/petalogix_ml605_mmu.c
> @@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
> env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
> /* setup pvr to match kernel setting */
> env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
> - env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
> + env->pvr.regs[0] |= PVR0_ENDI;
> env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
> - env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
> env->pvr.regs[4] = 0xc56b8000;
> env->pvr.regs[5] = 0xc56be000;
> }
> @@ -95,6 +94,10 @@ petalogix_ml605_init(MachineState *machine)
>
> /* init CPUs */
> cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
> + /* Use FPU but don't use floating point conversion and square
> + * root instructions
> + */
> + object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
> object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
>
> /* Attach emulated BRAM through the LMB. */
> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
> index dd04199..a6474f9 100644
> --- a/target-microblaze/cpu-qom.h
> +++ b/target-microblaze/cpu-qom.h
> @@ -63,6 +63,7 @@ typedef struct MicroBlazeCPU {
> struct {
> bool stackprot;
> uint32_t base_vectors;
> + uint8_t usefpu;
> } cfg;
>
> CPUMBState env;
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index 0f805d3..b857056 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -110,12 +110,14 @@ static void mb_cpu_realizefn(DeviceState *dev, Error
> **errp)
> | PVR2_USE_DIV_MASK \
> | PVR2_USE_HW_MUL_MASK \
> | PVR2_USE_MUL64_MASK \
> - | PVR2_USE_FPU_MASK \
> - | PVR2_USE_FPU2_MASK \
> | PVR2_FPU_EXC_MASK \
> | 0;
>
> - env->pvr.regs[0] |= cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0;
> + env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0) |
> + (cpu->cfg.usefpu ? PVR0_USE_FPU_MASK : 0);
> +
> + env->pvr.regs[2] |= (cpu->cfg.usefpu ? PVR2_USE_FPU_MASK : 0) |
> + (cpu->cfg.usefpu > 1 ? PVR2_USE_FPU2_MASK : 0);
>
> env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family. */
> env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
> @@ -161,6 +163,11 @@ static Property mb_properties[] = {
> DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
> DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
> true),
> + /* If use-fpu > 0 - FPU is enabled
> + * If use-fpu = 2 - Floating point conversion and square root
> instructions
> + * are enabled
> + */
> + DEFINE_PROP_UINT8("use-fpu", MicroBlazeCPU, cfg.usefpu, 2),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> index bd10b40..8187700 100644
> --- a/target-microblaze/translate.c
> +++ b/target-microblaze/translate.c
> @@ -1411,15 +1411,11 @@ static void dec_rts(DisasContext *dc)
>
> static int dec_check_fpuv2(DisasContext *dc)
> {
> - int r;
> -
> - r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
> -
> - if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
> + if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
> tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
> t_gen_raise_exception(dc, EXCP_HW_EXCP);
> }
> - return r;
> + return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
> }
>
> static void dec_fpu(DisasContext *dc)
> @@ -1428,7 +1424,7 @@ static void dec_fpu(DisasContext *dc)
>
> if ((dc->tb_flags & MSR_EE_FLAG)
> && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
> - && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
> + && (dc->cpu->cfg.usefpu != 1)) {
> tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
> t_gen_raise_exception(dc, EXCP_HW_EXCP);
> return;
> --
> 1.7.1
>
- [Qemu-devel] [PATCH v3 0/6] Add Microblaze configuration options, Alistair Francis, 2015/05/29
- [Qemu-devel] [PATCH v3 1/6] target-microblaze: Fix up indentation, Alistair Francis, 2015/05/29
- [Qemu-devel] [PATCH v3 2/6] target-microblaze: Preserve the pvr registers during reset, Alistair Francis, 2015/05/29
- [Qemu-devel] [PATCH v3 3/6] target-microblaze: Allow the stack protection to be disabled, Alistair Francis, 2015/05/29
- [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/29
- Re: [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a CPU property,
Edgar E. Iglesias <=
- [Qemu-devel] [PATCH v3 6/6] target-microblaze: Disable stack protection by default, Alistair Francis, 2015/05/29
- [Qemu-devel] [PATCH v3 4/6] target-microblaze: Tidy up the base-vectors property, Alistair Francis, 2015/05/29
- Re: [Qemu-devel] [PATCH v3 0/6] Add Microblaze configuration options, Edgar E. Iglesias, 2015/05/29