[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v8 00/10] Convert msix_init() to error
From: |
Cao jin |
Subject: |
Re: [Qemu-devel] [PATCH v8 00/10] Convert msix_init() to error |
Date: |
Fri, 13 Jan 2017 16:34:40 +0800 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.1.0 |
On 01/13/2017 04:22 PM, Markus Armbruster wrote:
> Cao jin <address@hidden> writes:
>
>> Only a tiny modification in patch "megasas: remove unnecessary
>> megasas_use_msix()" to fix a megasas issue.
>
> Please have a look at Michael's review in
> Message-ID: <address@hidden>
>
Oh...thanks for reminding, I missed that mail...
>> v8 changelog:
>> 1. reorder: place the "megasas: remove unnecessary megasas_use_msix()"
>> as the last one. and fix the bug in it, detailed description in it,
>> also removed the R-b of it.
>> 2. Add the Acked-by from Marcel for first 9 patches; add the R-b from Markus
>> to "hcd-xhci: check & correct param before using it".
>>
>> Test:
>> 1. make check ok
>> 2. command line test for all affected device, make sure their realization
>> is ok.
>> 3. detailed test for megasas, hcd-xhci, vmxnet3.
>> megasas: install a linux distro is ok
>> ./qemu-system-x86_64 --enable-kvm -m 1024
>> -device megasas,id=scsi0,bus=pci.0
>> -drive file=/xx/scsi-disk.img,if=none,id=drive-scsi0
>> -device
>> scsi-disk,bus=scsi0.0,channel=0,scsi-id=4,lun=0,drive=drive-scsi0,id=scsi0-4
>> -cdrom /xx/Fedora-Server-DVD-x86_64-23.iso --monitor stdio
>>
>> hcd-xhci: partition the usbstick.img, mkfs, write to file, is ok
>> ./qemu-system-x86_64 -M q35 -m 1024 --enable-kvm
>> -drive if=none,id=usbstick,file=/xx/usbstick.img
>> -device nec-usb-xhci,id=usb,p2=8,p3=8,bus=pcie.0
>> -device usb-storage,bus=usb.0,drive=usbstick --monitor stdio
>> /xx/FedoraWorkStatsion23-x86_64.img
>>
>> vmxnet3: ping another destination belongs to host's network is ok.
>> But no migration test, because I don't have a spare machine for now.
>> ./qemu-system-x86_64 -M q35 -m 1024 --enable-kvm
>> -netdev tap,id=mynet0 -device vmxnet3,netdev=mynet0
>> --monitor stdio /home/pino/vm/FedoraWorkStatsion23-x86_64.img
>
> You could migrate to a new QEMU on the same machine.
>
> Or, if you don't want to deal with two instances of QEMU running at the
> same time, migrate to file:
>
> (qemu) migrate "exec:cat >zzz"
>
> Start the target with -incoming "exec:cat zzz". Better than nothing.
>
Thanks for the info, I will try
--
Sincerely,
Cao jin
- [Qemu-devel] [PATCH v8 04/10] megasas: change behaviour of msix switch, (continued)
- [Qemu-devel] [PATCH v8 04/10] megasas: change behaviour of msix switch, Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 05/10] hcd-xhci: change behaviour of msix switch, Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 06/10] megasas: undo the overwrites of msi user configuration, Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 08/10] vmxnet3: remove unnecessary internal msix flag, Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 07/10] vmxnet3: fix reference leak issue, Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 10/10] megasas: remove unnecessary megasas_use_msix(), Cao jin, 2017/01/13
- [Qemu-devel] [PATCH v8 09/10] msi_init: convert assert to return -errno, Cao jin, 2017/01/13
- Re: [Qemu-devel] [PATCH v8 00/10] Convert msix_init() to error, Markus Armbruster, 2017/01/13
- Re: [Qemu-devel] [PATCH v8 00/10] Convert msix_init() to error,
Cao jin <=