[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC 2/7] s390x: chsc nt2 events are pci-only
From: |
Cornelia Huck |
Subject: |
Re: [Qemu-devel] [PATCH RFC 2/7] s390x: chsc nt2 events are pci-only |
Date: |
Fri, 7 Jul 2017 15:11:47 +0200 |
On Fri, 7 Jul 2017 15:01:59 +0200
Christian Borntraeger <address@hidden> wrote:
> On 07/07/2017 02:21 PM, Cornelia Huck wrote:
> > The nt2 event class is pci-only and therefore implemented in
> > the s390x pci code. Properly stub it out for non-pci builds.
> >
> > Signed-off-by: Cornelia Huck <address@hidden>
> > ---
> > hw/s390x/s390-pci-bus.c | 4 ++--
> > hw/s390x/s390-pci-bus.h | 4 ++--
> > target/s390x/ioinst.c | 18 ++++++++++++++++++
> > 3 files changed, 22 insertions(+), 4 deletions(-)
> >
> > diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
> > index 5651483781..eee9a04eac 100644
> > --- a/hw/s390x/s390-pci-bus.c
> > +++ b/hw/s390x/s390-pci-bus.c
> > @@ -47,7 +47,7 @@ S390pciState *s390_get_phb(void)
> > return phb;
> > }
> >
> > -int chsc_sei_nt2_get_event(void *res)
> > +int pci_chsc_sei_nt2_get_event(void *res)
> > {
> > ChscSeiNt2Res *nt2_res = (ChscSeiNt2Res *)res;
> > PciCcdfAvail *accdf;
> > @@ -87,7 +87,7 @@ int chsc_sei_nt2_get_event(void *res)
> > return rc;
> > }
> >
> > -int chsc_sei_nt2_have_event(void)
> > +int pci_chsc_sei_nt2_have_event(void)
> > {
> > S390pciState *s = s390_get_phb();
> >
> > diff --git a/hw/s390x/s390-pci-bus.h b/hw/s390x/s390-pci-bus.h
> > index cf142a3e68..29d3da10f6 100644
> > --- a/hw/s390x/s390-pci-bus.h
> > +++ b/hw/s390x/s390-pci-bus.h
> > @@ -318,8 +318,8 @@ typedef struct S390pciState {
> > } S390pciState;
> >
> > S390pciState *s390_get_phb(void);
> > -int chsc_sei_nt2_get_event(void *res);
> > -int chsc_sei_nt2_have_event(void);
> > +int pci_chsc_sei_nt2_get_event(void *res);
> > +int pci_chsc_sei_nt2_have_event(void);
> > void s390_pci_sclp_configure(SCCB *sccb);
> > void s390_pci_sclp_deconfigure(SCCB *sccb);
> > void s390_pci_iommu_enable(S390PCIIOMMU *iommu);
> > diff --git a/target/s390x/ioinst.c b/target/s390x/ioinst.c
> > index d5e6b8066b..a552f53167 100644
> > --- a/target/s390x/ioinst.c
> > +++ b/target/s390x/ioinst.c
> > @@ -599,6 +599,24 @@ static int chsc_sei_nt0_have_event(void)
> > return 0;
> > }
> >
> > +static int chsc_sei_nt2_get_event(void *res)
> > +{
> > +#ifdef CONFIG_PCI
> > + return pci_chsc_sei_nt2_get_event(res);
> > +#else
> > + return 1;
> > +#endif
> > +}
> > +
> > +static int chsc_sei_nt2_have_event(void)
> > +{
> > +#ifdef CONFIG_PCI
> > + return pci_chsc_sei_nt2_have_event();
> > +#else
> > + return 0;
> > +#endif
>
> I think this is similar to the io instructions. We should use the CPU
> model to decide what to return. This will then cover the 3 cases
> - CONFIG_PCI off
> - CONFIG_PCI on, but PCI disabled via cpu model
> - CONFIG_PCI on, and PCI enabled via cpu model
>
> no?
Using the cpu model sounds good, but I think we'll really need a stub
file for non-pci...
- [Qemu-devel] [PATCH RFC 0/7] s390x: zPCI detangling, Cornelia Huck, 2017/07/07
- [Qemu-devel] [PATCH RFC 2/7] s390x: chsc nt2 events are pci-only, Cornelia Huck, 2017/07/07
- [Qemu-devel] [PATCH RFC 1/7] kvm: remove hard dependency on pci, Cornelia Huck, 2017/07/07
- [Qemu-devel] [PATCH RFC 3/7] s390x/sclp: properly guard pci-specific functions, Cornelia Huck, 2017/07/07
- [Qemu-devel] [PATCH RFC 4/7] s390x/ccw: create s390 phb conditionally, Cornelia Huck, 2017/07/07
- [Qemu-devel] [PATCH RFC 5/7] s390x/pci: fence off instructions for non-pci, Cornelia Huck, 2017/07/07