[Qemu-devel] [PULL 4/9] hw/pci-host/xilinx-pcie: don't make "io" region be RAM

[Aleksandar Markovic]

From: Peter Maydell <address@hidden>

Currently we use memory_region_init_rom_nomigrate() to create
the "io" memory region to pass to pci_register_root_bus().
This is a dummy region, because this PCI controller doesn't
support accesses to PCI IO space.

There is no reason for the dummy region to be a RAM region;
it is only used as a place where PCI BARs can be mapped,
and if you could get a PCI card to do a bus master access
to the IO space it should not get acts-like-RAM behaviour.
Use a simple container memory region instead. (We do have
one PCI card model which can do bus master accesses to IO
space -- the LSI53C895A SCSI adaptor.)

This avoids the oddity of having a memory region which is
RAM but where the RAM is not migrated.

Note that the size of the region we use here has no
effect on behaviour.

Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
Signed-off-by: Aleksandar Markovic <address@hidden>
---
 hw/pci-host/xilinx-pcie.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/hw/pci-host/xilinx-pcie.c b/hw/pci-host/xilinx-pcie.c
index 044e312..b0a31b9 100644
--- a/hw/pci-host/xilinx-pcie.c
+++ b/hw/pci-host/xilinx-pcie.c
@@ -120,9 +120,8 @@ static void xilinx_pcie_host_realize(DeviceState *dev, 
Error **errp)
     memory_region_init(&s->mmio, OBJECT(s), "mmio", UINT64_MAX);
     memory_region_set_enabled(&s->mmio, false);
 
-    /* dummy I/O region */
-    memory_region_init_ram_nomigrate(&s->io, OBJECT(s), "io", 16, NULL);
-    memory_region_set_enabled(&s->io, false);
+    /* dummy PCI I/O region (not visible to the CPU) */
+    memory_region_init(&s->io, OBJECT(s), "io", 16);
 
     /* interrupt out */
     qdev_init_gpio_out_named(dev, &s->irq, "interrupt_out", 1);
-- 
2.7.4