[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Savannah-hackers] ide errors
From: |
Loic Dachary |
Subject: |
Re: [Savannah-hackers] ide errors |
Date: |
Fri, 29 Jun 2001 07:28:47 +0200 |
Paul Visscher writes:
> I noticed that it seems to be hanging at the end of a commit to
> cvs - after cvs says "done" it seems to hang for a while and then
> exits. I logged into savannah to see if maybe the load was high or
> something. It wasn't, but dmesg showed a bunch of errors on hdc and
> hdd.
>
> I saved the output of dmesg in /home/paulv/20010628-ide_errors.
I changed the IDE disk parameters and did the experiments, on
hdc mostly, causing a few controler reset on the second IDE bus. I did
it on hdc because it's not in use (there is no hdd). When I found the
best disk parameters I applied them on hda which is the only disk in
use at present.
http://savannah.gnu.org/savannah.html#IDE%20Disk%20tweaking
Thanks for reporting this anyway, it's good to see that errors
do not go unnoticed ;-)
Regarding the delay, it happens because of the sync with
gnudist. If the connection between subversions and gnudist is slow
for some reason, it may take a while. Note, however, that it only
happens *after* the commit. Interrupting won't lose anything and the
nightly script on gnudist will catch up if the sync cannot be done for
some reason.
I hope this helps clarifying the situation,
--
Loic Dachary http://www.dachary.org/ address@hidden
24 av Secretan http://www.senga.org/ address@hidden
75019 Paris Tel: 33 1 42 45 09 16 address@hidden
GPG Public Key: http://www.dachary.org/loic/gpg.txt
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Savannah-hackers] ide errors,
Loic Dachary <=