[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Minor tweaks to path handling (re-submit)
|
From: |
Akim Demaille |
|
Subject: |
Re: Minor tweaks to path handling (re-submit) |
|
Date: |
17 Apr 2001 19:22:38 +0200 |
|
User-agent: |
Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Cuyahoga Valley) |
>>>>> "Akim" == Akim Demaille <address@hidden> writes:
>>>>> "Tim" == Tim Van Holder <address@hidden> writes:
Tim> Can I apply the other patch I sent in (the config.log one)?
Here is what I'd suggest: just don't use config.log before it is set
up. Toying with FD is bad, as it's very nonportable, and we must not
take such risks. I left on purpose the effect on Autoconf's configure
below.
AS_MESSAGE is built so that if AS_MESSAGE_LOG_FD is not defined, then
there is no logging. This patch relies on this.
This does not address the issue raised by Tim about config.status.
I'll look at it into more details.
Index: ChangeLog
from Akim Demaille <address@hidden>
Don't mess with FDs.
* acgeneral.m4 (_AC_INIT_DEFAULTS_FDS): Remove, replace with
inline setting up of AS_MESSAGE_FD.
(AS_MESSAGE_LOG_FD): Do not define, so that AS_MESSAGE does not
output in it before...
(_AC_INIT_CONFIG_LOG): here, which is run after the handling of
options.
Index: acgeneral.m4
===================================================================
RCS file: /cvs/autoconf/acgeneral.m4,v
retrieving revision 1.715
diff -u -u -r1.715 acgeneral.m4
--- acgeneral.m4 2001/04/17 16:14:05 1.715
+++ acgeneral.m4 2001/04/17 17:14:14
@@ -687,27 +687,21 @@
])
-# _AC_INIT_DEFAULTS_FDS
-# ---------------------
+# File Descriptors
+# ----------------
# Set up the file descriptors used by `configure'.
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# AS_MESSAGE_LOG_FD compiler messages saved in config.log
+# AS_MESSAGE_FD checking for... messages and results
m4_define([AS_MESSAGE_FD], 6)
-m4_define([AS_MESSAGE_LOG_FD], 5)
# That's how they used to be named.
AU_ALIAS([AC_FD_CC], [AS_MESSAGE_LOG_FD])
AU_ALIAS([AC_FD_MSG], [AS_MESSAGE_FD])
-m4_define([_AC_INIT_DEFAULTS_FDS],
-[# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
address@hidden:@ AS_MESSAGE_LOG_FD compiler messages saved in config.log
address@hidden:@ AS_MESSAGE_FD checking for... messages and results
-exec AS_MESSAGE_LOG_FD>>/dev/null
-exec AS_MESSAGE_FD>&1
-])# _AC_INIT_DEFAULTS_FDS
-
# _AC_INIT_DEFAULTS
# -----------------
@@ -723,8 +717,8 @@
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+exec AS_MESSAGE_FD>&1
-_AC_INIT_DEFAULTS_FDS
#
# Initializations.
#
@@ -1367,7 +1361,8 @@
# Initialize the config.log file descriptor and write header to it.
m4_define([_AC_INIT_CONFIG_LOG],
[m4_divert_text([INIT_PREPARE],
-[exec AS_MESSAGE_LOG_FD>>config.log
+[m4_define([AS_MESSAGE_LOG_FD], 5)dnl
+exec AS_MESSAGE_LOG_FD>config.log
cat >config.log <<EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
@@ -3620,7 +3615,7 @@
cat >>$CONFIG_STATUS <<\_ACEOF
AS_SHELL_SANITIZE
-_AC_INIT_DEFAULTS_FDS
+exec AS_MESSAGE_FD>&1
_ACEOF
Index: configure
===================================================================
RCS file: /cvs/autoconf/configure,v
retrieving revision 1.125
diff -u -u -r1.125 configure
--- configure 2001/04/16 20:17:01 1.125
+++ configure 2001/04/17 17:14:15
@@ -77,13 +77,6 @@
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-exec 5>>/dev/null
exec 6>&1
#
@@ -203,8 +196,7 @@
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
- { { echo "$as_me:206: error: invalid feature name: $ac_feature" >&5
-echo "$as_me: error: invalid feature name: $ac_feature" >&2;}
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
eval "enable_$ac_feature=no" ;;
@@ -213,8 +205,7 @@
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
- { { echo "$as_me:216: error: invalid feature name: $ac_feature" >&5
-echo "$as_me: error: invalid feature name: $ac_feature" >&2;}
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/-/_/g'`
case $ac_option in
@@ -396,8 +387,7 @@
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
- { { echo "$as_me:399: error: invalid package name: $ac_package" >&5
-echo "$as_me: error: invalid package name: $ac_package" >&2;}
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package| sed 's/-/_/g'`
case $ac_option in
@@ -410,8 +400,7 @@
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-_$ac_cr_alnum]" >/dev/null &&
- { { echo "$as_me:413: error: invalid package name: $ac_package" >&5
-echo "$as_me: error: invalid package name: $ac_package" >&2;}
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/-/_/g'`
eval "with_$ac_package=no" ;;
@@ -434,10 +423,8 @@
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { { echo "$as_me:437: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2;}
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
@@ -445,8 +432,7 @@
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$ac_cr_alnum]" >/dev/null &&
- { { echo "$as_me:448: error: invalid variable name: $ac_envvar" >&5
-echo "$as_me: error: invalid variable name: $ac_envvar" >&2;}
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
eval "$ac_envvar='$ac_optarg'"
@@ -454,11 +440,9 @@
*)
# FIXME: should be removed in autoconf 3.0.
- { echo "$as_me:457: WARNING: you should use --build, --host, --target" >&5
-echo "$as_me: WARNING: you should use --build, --host, --target" >&2;}
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$ac_cr_alnum]" >/dev/null &&
- { echo "$as_me:460: WARNING: invalid host type: $ac_option" >&5
-echo "$as_me: WARNING: invalid host type: $ac_option" >&2;}
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option}
${target_alias=$ac_option}
;;
@@ -467,8 +451,7 @@
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { { echo "$as_me:470: error: missing argument to $ac_option" >&5
-echo "$as_me: error: missing argument to $ac_option" >&2;}
+ { echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
@@ -481,8 +464,7 @@
case $ac_val in
[\\/$]* | ?:[\\/]* ) ;;
NONE ) ;;
- *) { { echo "$as_me:484: error: expected an absolute path for --$ac_var:
$ac_val" >&5
-echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2;}
+ *) { echo "$as_me: error: expected an absolute path for --$ac_var:
$ac_val" >&2
{ (exit 1); exit 1; }; };;
esac
done
@@ -497,10 +479,8 @@
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- { echo "$as_me:500: WARNING: If you wanted to set the --build type, don't
use --host.
- If a cross compiler is detected then cross compile mode will be used." >&5
-echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used."
>&2;}
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use
--host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -527,12 +507,10 @@
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { { echo "$as_me:530: error: cannot find sources in $ac_confdir or .." >&5
-echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2;}
+ { echo "$as_me: error: cannot find sources in $ac_confdir or .." >&2
{ (exit 1); exit 1; }; }
else
- { { echo "$as_me:534: error: cannot find sources in $srcdir" >&5
-echo "$as_me: error: cannot find sources in $srcdir" >&2;}
+ { echo "$as_me: error: cannot find sources in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
fi
@@ -657,8 +635,7 @@
echo
$ac_configure --help
else
- { echo "$as_me:660: WARNING: no configuration information is in
$ac_subdir" >&5
-echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2;}
+ echo "$as_me: WARNING: no configuration information is in $ac_subdir" >&2
fi
cd $ac_popdir
done
@@ -677,7 +654,7 @@
EOF
exit 0
fi
-exec 5>>config.log
+exec 5>config.log
cat >config.log <<EOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
@@ -807,7 +784,7 @@
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
- { echo "$as_me:810: loading site script $ac_site_file" >&5
+ { echo "$as_me:787: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
cat "$ac_site_file" >&5
. "$ac_site_file"
@@ -818,7 +795,7 @@
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { echo "$as_me:821: loading cache $cache_file" >&5
+ { echo "$as_me:798: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . $cache_file;;
@@ -826,7 +803,7 @@
esac
fi
else
- { echo "$as_me:829: creating cache $cache_file" >&5
+ { echo "$as_me:806: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -842,30 +819,30 @@
eval ac_new_val="\$ac_env_${ac_var}_value"
case $ac_old_set,$ac_new_set in
set,)
- { echo "$as_me:845: WARNING: \`$ac_var' was set to \`$ac_old_val' in the
previous run" >&5
+ { echo "$as_me:822: WARNING: \`$ac_var' was set to \`$ac_old_val' in the
previous run" >&5
echo "$as_me: WARNING: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
ac_suggest_removing_cache=: ;;
,set)
- { echo "$as_me:849: WARNING: \`$ac_var' was not set in the previous run"
>&5
+ { echo "$as_me:826: WARNING: \`$ac_var' was not set in the previous run"
>&5
echo "$as_me: WARNING: \`$ac_var' was not set in the previous run" >&2;}
ac_suggest_removing_cache=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:855: WARNING: \`$ac_var' has changed since the previous
run:" >&5
+ { echo "$as_me:832: WARNING: \`$ac_var' has changed since the previous
run:" >&5
echo "$as_me: WARNING: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:857: WARNING: former value: $ac_old_val" >&5
+ { echo "$as_me:834: WARNING: former value: $ac_old_val" >&5
echo "$as_me: WARNING: former value: $ac_old_val" >&2;}
- { echo "$as_me:859: WARNING: current value: $ac_new_val" >&5
+ { echo "$as_me:836: WARNING: current value: $ac_new_val" >&5
echo "$as_me: WARNING: current value: $ac_new_val" >&2;}
ac_suggest_removing_cache=:
fi;;
esac
done
if $ac_suggest_removing_cache; then
- { echo "$as_me:866: WARNING: changes in the environment can compromise the
build" >&5
+ { echo "$as_me:843: WARNING: changes in the environment can compromise the
build" >&5
echo "$as_me: WARNING: changes in the environment can compromise the build"
>&2;}
- { echo "$as_me:868: WARNING: consider removing $cache_file and starting
over" >&5
+ { echo "$as_me:845: WARNING: consider removing $cache_file and starting
over" >&5
echo "$as_me: WARNING: consider removing $cache_file and starting over" >&2;}
fi
@@ -884,10 +861,10 @@
echo "#! $SHELL" >conftest.sh
echo "exit 0" >>conftest.sh
chmod +x conftest.sh
-if { (echo "$as_me:887: PATH=\".;.\"; conftest.sh") >&5
+if { (echo "$as_me:864: PATH=\".;.\"; conftest.sh") >&5
(PATH=".;."; conftest.sh) 2>&5
ac_status=$?
- echo "$as_me:890: \$? = $ac_status" >&5
+ echo "$as_me:867: \$? = $ac_status" >&5
(exit $ac_status); }; then
ac_path_separator=';'
else
@@ -913,7 +890,7 @@
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:916: error: cannot find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." >&5
+ { { echo "$as_me:893: error: cannot find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." >&5
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -933,7 +910,7 @@
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:936: checking for a BSD compatible install" >&5
+echo "$as_me:913: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
@@ -982,7 +959,7 @@
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:985: result: $INSTALL" >&5
+echo "$as_me:962: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -993,7 +970,7 @@
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo "$as_me:996: checking whether build environment is sane" >&5
+echo "$as_me:973: checking whether build environment is sane" >&5
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
@@ -1016,7 +993,7 @@
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { echo "$as_me:1019: error: ls -t appears to fail. Make sure there is
not a broken
+ { { echo "$as_me:996: error: ls -t appears to fail. Make sure there is
not a broken
alias in your environment" >&5
echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
@@ -1029,14 +1006,14 @@
# Ok.
:
else
- { { echo "$as_me:1032: error: newly created file is older than distributed
files!
+ { { echo "$as_me:1009: error: newly created file is older than distributed
files!
Check your system clock" >&5
echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f conftest*
-echo "$as_me:1039: result: yes" >&5
+echo "$as_me:1016: result: yes" >&5
echo "${ECHO_T}yes" >&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
@@ -1057,7 +1034,7 @@
# sed with no file args requires a program.
test -z "$program_transform_name" && program_transform_name="s,x,x,"
-echo "$as_me:1060: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "$as_me:1037: checking whether ${MAKE-make} sets \${MAKE}" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
@@ -1077,11 +1054,11 @@
rm -f conftest.make
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:1080: result: yes" >&5
+ echo "$as_me:1057: result: yes" >&5
echo "${ECHO_T}yes" >&6
SET_MAKE=
else
- echo "$as_me:1084: result: no" >&5
+ echo "$as_me:1061: result: no" >&5
echo "${ECHO_T}no" >&6
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -1091,7 +1068,7 @@
VERSION=2.49e
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { { echo "$as_me:1094: error: source directory already configured; run
\"make distclean\" there first" >&5
+ { { echo "$as_me:1071: error: source directory already configured; run
\"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1105,78 +1082,78 @@
EOF
missing_dir=`cd $ac_aux_dir && pwd`
-echo "$as_me:1108: checking for working aclocal" >&5
+echo "$as_me:1085: checking for working aclocal" >&5
echo $ECHO_N "checking for working aclocal... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
ACLOCAL=aclocal
- echo "$as_me:1115: result: found" >&5
+ echo "$as_me:1092: result: found" >&5
echo "${ECHO_T}found" >&6
else
ACLOCAL="$SHELL $missing_dir/missing aclocal"
- echo "$as_me:1119: result: missing" >&5
+ echo "$as_me:1096: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
-echo "$as_me:1123: checking for working autoconf" >&5
+echo "$as_me:1100: checking for working autoconf" >&5
echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
- echo "$as_me:1130: result: found" >&5
+ echo "$as_me:1107: result: found" >&5
echo "${ECHO_T}found" >&6
else
AUTOCONF="$SHELL $missing_dir/missing autoconf"
- echo "$as_me:1134: result: missing" >&5
+ echo "$as_me:1111: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
-echo "$as_me:1138: checking for working automake" >&5
+echo "$as_me:1115: checking for working automake" >&5
echo $ECHO_N "checking for working automake... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
- echo "$as_me:1145: result: found" >&5
+ echo "$as_me:1122: result: found" >&5
echo "${ECHO_T}found" >&6
else
AUTOMAKE="$SHELL $missing_dir/missing automake"
- echo "$as_me:1149: result: missing" >&5
+ echo "$as_me:1126: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
-echo "$as_me:1153: checking for working autoheader" >&5
+echo "$as_me:1130: checking for working autoheader" >&5
echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
- echo "$as_me:1160: result: found" >&5
+ echo "$as_me:1137: result: found" >&5
echo "${ECHO_T}found" >&6
else
AUTOHEADER="$SHELL $missing_dir/missing autoheader"
- echo "$as_me:1164: result: missing" >&5
+ echo "$as_me:1141: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
-echo "$as_me:1168: checking for working makeinfo" >&5
+echo "$as_me:1145: checking for working makeinfo" >&5
echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
- echo "$as_me:1175: result: found" >&5
+ echo "$as_me:1152: result: found" >&5
echo "${ECHO_T}found" >&6
else
MAKEINFO="$SHELL $missing_dir/missing makeinfo"
- echo "$as_me:1179: result: missing" >&5
+ echo "$as_me:1156: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
@@ -1185,7 +1162,7 @@
# Extract the first word of "expr", so it can be a program name with args.
set dummy expr; ac_word=$2
-echo "$as_me:1188: checking for $ac_word" >&5
+echo "$as_me:1165: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_EXPR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1202,12 +1179,12 @@
test -z "$ac_dir" && ac_dir=.
if $as_executable_p "$ac_dir/$ac_word"; then
ac_cv_path_EXPR="$ac_dir/$ac_word"
- echo "$as_me:1205: found $ac_dir/$ac_word" >&5
+ echo "$as_me:1182: found $ac_dir/$ac_word" >&5
{ ac_try='$ac_dir/$ac_word --version </dev/null >&2'
- { (eval echo "$as_me:1207: \"$ac_try\"") >&5
+ { (eval echo "$as_me:1184: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
- echo "$as_me:1210: \$? = $ac_status" >&5
+ echo "$as_me:1187: \$? = $ac_status" >&5
(exit $ac_status); }; }
break
fi
@@ -1219,10 +1196,10 @@
EXPR=$ac_cv_path_EXPR
if test -n "$EXPR"; then
- echo "$as_me:1222: result: $EXPR" >&5
+ echo "$as_me:1199: result: $EXPR" >&5
echo "${ECHO_T}$EXPR" >&6
else
- echo "$as_me:1225: result: no" >&5
+ echo "$as_me:1202: result: no" >&5
echo "${ECHO_T}no" >&6
fi
@@ -1234,7 +1211,7 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:1237: checking for $ac_word" >&5
+echo "$as_me:1214: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_M4+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1251,12 +1228,12 @@
test -z "$ac_dir" && ac_dir=.
if $as_executable_p "$ac_dir/$ac_word"; then
ac_cv_path_M4="$ac_dir/$ac_word"
- echo "$as_me:1254: found $ac_dir/$ac_word" >&5
+ echo "$as_me:1231: found $ac_dir/$ac_word" >&5
{ ac_try='$ac_dir/$ac_word --version </dev/null >&2'
- { (eval echo "$as_me:1256: \"$ac_try\"") >&5
+ { (eval echo "$as_me:1233: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
- echo "$as_me:1259: \$? = $ac_status" >&5
+ echo "$as_me:1236: \$? = $ac_status" >&5
(exit $ac_status); }; }
break
fi
@@ -1268,10 +1245,10 @@
M4=$ac_cv_path_M4
if test -n "$M4"; then
- echo "$as_me:1271: result: $M4" >&5
+ echo "$as_me:1248: result: $M4" >&5
echo "${ECHO_T}$M4" >&6
else
- echo "$as_me:1274: result: no" >&5
+ echo "$as_me:1251: result: no" >&5
echo "${ECHO_T}no" >&6
fi
@@ -1279,7 +1256,7 @@
done
test -n "$M4" || M4="m4"
-echo "$as_me:1282: checking whether m4 supports frozen files" >&5
+echo "$as_me:1259: checking whether m4 supports frozen files" >&5
echo $ECHO_N "checking whether m4 supports frozen files... $ECHO_C" >&6
if test "${ac_cv_prog_gnu_m4+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1291,10 +1268,10 @@
esac
fi
fi
-echo "$as_me:1294: result: $ac_cv_prog_gnu_m4" >&5
+echo "$as_me:1271: result: $ac_cv_prog_gnu_m4" >&5
echo "${ECHO_T}$ac_cv_prog_gnu_m4" >&6
if test x"$ac_cv_prog_gnu_m4" != xyes; then
- { { echo "$as_me:1297: error: GNU m4 1.4 is required" >&5
+ { { echo "$as_me:1274: error: GNU m4 1.4 is required" >&5
echo "$as_me: error: GNU m4 1.4 is required" >&2;}
{ (exit 1); exit 1; }; }
fi
@@ -1306,7 +1283,7 @@
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:1309: checking for $ac_word" >&5
+echo "$as_me:1286: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_AWK+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1321,12 +1298,12 @@
test -z "$ac_dir" && ac_dir=.
$as_executable_p "$ac_dir/$ac_word" || continue
ac_cv_prog_AWK="$ac_prog"
-echo "$as_me:1324: found $ac_dir/$ac_word" >&5
+echo "$as_me:1301: found $ac_dir/$ac_word" >&5
{ ac_try='$ac_dir/$ac_word --version </dev/null >&2'
- { (eval echo "$as_me:1326: \"$ac_try\"") >&5
+ { (eval echo "$as_me:1303: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
- echo "$as_me:1329: \$? = $ac_status" >&5
+ echo "$as_me:1306: \$? = $ac_status" >&5
(exit $ac_status); }; }
break
done
@@ -1335,10 +1312,10 @@
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- echo "$as_me:1338: result: $AWK" >&5
+ echo "$as_me:1315: result: $AWK" >&5
echo "${ECHO_T}$AWK" >&6
else
- echo "$as_me:1341: result: no" >&5
+ echo "$as_me:1318: result: no" >&5
echo "${ECHO_T}no" >&6
fi
@@ -1346,25 +1323,25 @@
done
# Generating man pages.
-echo "$as_me:1349: checking for working help2man" >&5
+echo "$as_me:1326: checking for working help2man" >&5
echo $ECHO_N "checking for working help2man... $ECHO_C" >&6
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (help2man --version) < /dev/null > /dev/null 2>&1; then
HELP2MAN=help2man
- echo "$as_me:1356: result: found" >&5
+ echo "$as_me:1333: result: found" >&5
echo "${ECHO_T}found" >&6
else
HELP2MAN="$SHELL $missing_dir/missing help2man"
- echo "$as_me:1360: result: missing" >&5
+ echo "$as_me:1337: result: missing" >&5
echo "${ECHO_T}missing" >&6
fi
# We use a path for perl so the #! line in autoscan will work.
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
-echo "$as_me:1367: checking for $ac_word" >&5
+echo "$as_me:1344: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_path_PERL+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1381,12 +1358,12 @@
test -z "$ac_dir" && ac_dir=.
if $as_executable_p "$ac_dir/$ac_word"; then
ac_cv_path_PERL="$ac_dir/$ac_word"
- echo "$as_me:1384: found $ac_dir/$ac_word" >&5
+ echo "$as_me:1361: found $ac_dir/$ac_word" >&5
{ ac_try='$ac_dir/$ac_word --version </dev/null >&2'
- { (eval echo "$as_me:1386: \"$ac_try\"") >&5
+ { (eval echo "$as_me:1363: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
- echo "$as_me:1389: \$? = $ac_status" >&5
+ echo "$as_me:1366: \$? = $ac_status" >&5
(exit $ac_status); }; }
break
fi
@@ -1399,17 +1376,17 @@
PERL=$ac_cv_path_PERL
if test -n "$PERL"; then
- echo "$as_me:1402: result: $PERL" >&5
+ echo "$as_me:1379: result: $PERL" >&5
echo "${ECHO_T}$PERL" >&6
else
- echo "$as_me:1405: result: no" >&5
+ echo "$as_me:1382: result: no" >&5
echo "${ECHO_T}no" >&6
fi
if test "$PERL" != no; then
PERLSCRIPTS="autoscan autoupdate"
else
- { echo "$as_me:1412: WARNING: autoscan and autoupdate will not be built
since perl is not found" >&5
+ { echo "$as_me:1389: WARNING: autoscan and autoupdate will not be built
since perl is not found" >&5
echo "$as_me: WARNING: autoscan and autoupdate will not be built since perl is
not found" >&2;}
fi
@@ -1425,7 +1402,7 @@
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:1428: checking for a BSD compatible install" >&5
+echo "$as_me:1405: checking for a BSD compatible install" >&5
echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
@@ -1474,7 +1451,7 @@
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:1477: result: $INSTALL" >&5
+echo "$as_me:1454: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -1603,7 +1580,7 @@
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:1606: creating $CONFIG_STATUS" >&5
+{ echo "$as_me:1583: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
@@ -1682,13 +1659,6 @@
# CDPATH.
$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=:; export CDPATH; }
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-exec 5>>/dev/null
exec 6>&1
_ACEOF
@@ -1723,9 +1693,7 @@
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
- instantiate a configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate a configuration header FILE
+ instantiate the configuration file FILE
Configuration files:
$config_files
@@ -1780,7 +1748,7 @@
echo "$ac_cs_version"; exit 0 ;;
--he | --h)
# Conflict between --help and --header
- { { echo "$as_me:1783: error: ambiguous option: $1
+ { { echo "$as_me:1751: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
@@ -1807,12 +1775,12 @@
'tests/atconfig' ) CONFIG_FILES="$CONFIG_FILES tests/atconfig" ;;
# This is an error.
- -*) { { echo "$as_me:1810: error: unrecognized option: $1
+ -*) { { echo "$as_me:1778: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
{ (exit 1); exit 1; }; } ;;
- *) { { echo "$as_me:1815: error: invalid argument: $1" >&5
+ *) { { echo "$as_me:1783: error: invalid argument: $1" >&5
echo "$as_me: error: invalid argument: $1" >&2;}
{ (exit 1); exit 1; }; };;
esac
@@ -2038,7 +2006,7 @@
esac
if test x"$ac_file" != x-; then
- { echo "$as_me:2041: creating $ac_file" >&5
+ { echo "$as_me:2009: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
rm -f "$ac_file"
fi
@@ -2056,7 +2024,7 @@
-) echo $tmp/stdin ;;
[\\/$]*)
# Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:2059: error: cannot find input file:
$f" >&5
+ test -f "$f" || { { echo "$as_me:2027: error: cannot find input file:
$f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
echo $f;;
@@ -2069,7 +2037,7 @@
echo $srcdir/$f
else
# /dev/null tree
- { { echo "$as_me:2072: error: cannot find input file: $f" >&5
+ { { echo "$as_me:2040: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
{ (exit 1); exit 1; }; }
fi;;
- Minor tweaks to path handling (re-submit), Tim Van Holder, 2001/04/14
- Re: Minor tweaks to path handling (re-submit), Akim Demaille, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Tim Van Holder, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Akim Demaille, 2001/04/17
- Re: Minor tweaks to path handling (re-submit),
Akim Demaille <=
- Re: Minor tweaks to path handling (re-submit), Lars J. Aas, 2001/04/17
- RE: Minor tweaks to path handling (re-submit), Tim Van Holder, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Akim Demaille, 2001/04/17
- RE: Minor tweaks to path handling (re-submit), Tim Van Holder, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Akim Demaille, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Lars J. Aas, 2001/04/17
- Re: Minor tweaks to path handling (re-submit), Akim Demaille, 2001/04/17
- RE: Minor tweaks to path handling (re-submit), Tim Van Holder, 2001/04/17