avr-gcc-list
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [avr-gcc-list] stk500 board acting strangely


From: Ewout
Subject: Re: [avr-gcc-list] stk500 board acting strangely
Date: Sat, 4 Oct 2003 03:08:02 +1200 (NZST)

Thanks for the tip. No, it didn't change it.

Ewout

 --- Robert Ussery <address@hidden> wrote: >
Check 
your serial cable. Try trading it out with a
> different one.
> This in all likelihood isn't your problem, but it's
> worth a check. The cable
> that came with my STK500 was faulty, and caused me
> unending grief until I
> switched it around with a different one.
> 
> - Robert
> 
> 
> ----- Original Message -----
> From: "Ewout" <address@hidden>
> To: <address@hidden>
> Sent: Thursday, October 02, 2003 10:34 AM
> Subject: [avr-gcc-list] stk500 board acting
> strangely
> 
> 
> > Hi,
> >
> > I have been using my stk500 board for a while now
> and
> > it worked like a charm. I have the jtag ice also
> on it
> > and connect to it using avarice.
> >
> > The problem I have is, since this morning I cannot
> > connect anymore using avrdude. avrdude complains
> about
> > not being able to serially communicate with the
> board.
> > Also, avrstudio (as a backup to avrdude) fails to
> do
> > this.
> >
> > My avarice connection still seems to work but is
> > buggy. I get a lot of errors such as the one
> below:
> >
> > avarice --part atmega16 --jtag /dev/cuaa0 --file
> hello
> > -p
> > AVaRICE version 2.0.20030403cvs, May  8 2003
> 00:50:52
> >
> > JTAG config starting.
> > Hardware Version: 0xc0
> > Software Version: 0x77
> > Reported JTAG device ID: 0x9403
> > Configured for device ID: 0x9403 atmega16 --
> Matched
> > with atmega16
> > LockBits -> 0xff
> >
> > Reading Fuse Bytes:
> >   Extended Fuse byte -> 0xff
> >       High Fuse byte -> 0x1d
> >        Low Fuse byte -> 0xff
> > JTAG config complete.
> > Downloading to
> > target....................................
> > ...........................................
> > ............................................
> > ............................................
> > ............................................
> > .......................................
> > ....Error writing to target
> > pinkeltje[oldenburgh]:~/techniek/software/helloavr
> >
> >
> >
> > So, am I experiencing a hw failure on the stk500
> board
> > ?? This seems really odd.
> >
> > Anyone who has help or a similar experience please
> let
> > me know.
> >
> > Ewout Boks
> >
> >
> > http://search.yahoo.com.au - Yahoo! Search
> > - Looking for more? Try the new Yahoo! Search
> >
> > _______________________________________________
> > avr-gcc-list mailing list
> > address@hidden
> > http://www.avr1.org/mailman/listinfo/avr-gcc-list
> >
> 
>  

http://search.yahoo.com.au - Yahoo! Search
- Looking for more? Try the new Yahoo! Search


reply via email to

[Prev in Thread] Current Thread [Next in Thread]