[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down

From: Bahn William L Civ USAFA/DFCS
Subject: RE: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down
Date: Tue, 26 Sep 2006 15:42:40 -0600


Just want to get clarification on one point:

> I am not responsible.  This includes, but is not limited to:

>     Transmitting directly into the receive port

Does this apply to the BasicTX and BasicRX boards as well. I called the
day we ordered this board asking about what kind of antennae was
available for these daughterboards and was told that they were
essentially baseband I/O boards. I then specifically asked if the output
of the BasicTX board could be piped directly into the BasicRX board and
was told yes. Is this the case for these particular daughterboards?


> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On
> Behalf Of Matt Ettus
> Sent: Tuesday, September 26, 2006 3:33 PM
> To: hanwen
> Cc: Discuss gnuradio
> Subject: Re: [Discuss-gnuradio] Mayday, Mayday, flex2400 is down
> hanwen wrote:
> > Help!
> >
> > Today, I connect two flex2400 directly through a coaxial wire. Maybe
> > the gain is too high, the receiving one don't work any more.
> > One I plug the broken one on the mother board, the python graph
> > not running and no data is transferred from usrp to PC. I see
> > on the fft window of usrp_fft.py.
> > I wonder which part of the daughter borad is broken and if it could
> > repaired.
> > I hope Ettus Research can provide me some repair service and it's
> > cause the board is just bought about 5 months ago ;)
> >
> Hanwen,
> I don't understand why you think this should be a free repair.
> Everything you purchased from me worked at the time you received it,
> has continued to work for 5 months.  The only reason it no longer
> is that you did something which:
>     1) I have repeatedly stated should not be done.
>     2) Would have destroyed just about any receiver you are likely to
> find.
> Just to be clear for everyone out there -- if the products you buy
> me don't work WHEN THEY ARRIVE, I will replace them.  If you break
> I am not responsible.  This includes, but is not limited to:
>     Lightning strikes to your equipment
>     You dropping metal objects onto powered circuit boards
>     Spilling your coffee on them
>     Transmitting directly into the receive port
>     Not taking adequate static safety precautions
>     Using power supplies other than the ones I provide
> Please also note that it is EXTREMELY rare for items to arrive broken,
> since everything is tested immediately before shipment.
> Matt
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

reply via email to

[Prev in Thread] Current Thread [Next in Thread]