[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] NTSC Receiver
From: |
Daniel Garcia |
Subject: |
Re: [Discuss-gnuradio] NTSC Receiver |
Date: |
Fri, 23 Feb 2007 13:46:04 -0800 (PST) |
John,
You may also want to try increasing the decimation (lowering the bandwidth);
this may help cut some noise. Change the -d flag to 32 or 64.
-Daniel
----- Original Message ----
From: Daniel Garcia <address@hidden>
To: John Clark <address@hidden>
Cc: GNURadio Discussion List <address@hidden>
Sent: Friday, February 23, 2007 3:38:19 PM
Subject: Re: [Discuss-gnuradio] NTSC Receiver
I see your using an over the air channel. I've only tested with cable tv. The
simple detector probably can't deal with the noise found in that signal. I will
connect an antenna to my board tonight and look in to that. If you happen to
have cable (or the VHF output of a TV receiver) you can try that for now.
Thanks,
Daniel
>TV Channel 15 should be 476 - 482, and the Video at 477.25, which
>I see on my FFT display of the channel.
>
>John Clark.
____________________________________________________________________________________
Never Miss an Email
Stay connected with Yahoo! Mail on your mobile. Get started!
http://mobile.yahoo.com/services?promote=mail
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
____________________________________________________________________________________
Have a burning question?
Go to www.Answers.yahoo.com and get answers from real people who know.