Re: [Discuss-gnuradio] PS3 and gnuradio

[Robert McGwier]

That needs a Linux ALSA sink.

Bob

'
Johnathan Corgan wrote:
> Philip Balister wrote:
>
> > What would be a good GNU Radio test on a 500 MHz PPC board, with a
> > USRP, but no display?
>
> To just test that GNU Radio itself is sane, you can run the dial tone
> demo in:
>
> gnuradio-examples/python/audio/dial_tone.py
>
> This will send a dial tone to the audio output.
>
> You can test the USB <--> USRP performance using:
>
> gnuradio-examples/python/usrp/benchmark_usb.py
>
> If you have a suitable receiver board, you can test the whole system by
> receiving a broadcast FM signal:
>
> gnuradio-examples/python/usrp/usrp_wfm_rcv_nogui.py
> (You need to set which receive side with -R and frequency with -f)


--
AMSAT Director and VP Engineering. Member: ARRL, AMSAT-DL,
TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. ARRL SDR WG Chair
"If you're going to be crazy, you have to get paid for it or
else you're going to be locked up." Hunter S. Thompson