[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Recovering x(t) from IQ samples
From: |
Jens Elsner |
Subject: |
Re: [Discuss-gnuradio] Recovering x(t) from IQ samples |
Date: |
Sat, 18 Aug 2007 13:01:51 +0200 |
User-agent: |
Mutt/1.5.9i |
Just a quick answer - I hope I understood your problem correctly this
time.
On Fri, Aug 17, 2007 at 05:23:06PM -0600, Bahn William L Civ USAFA/DFCS wrote:
>
> I'm asking the question for several reasons - some theoretical and others
> practical. The basic driving force is as follows:
>
> I have the following processing chain:
>
> BBC -> FILE -> GR -> USRP -> RF -> USRP -> GR -> FILE -> BBC
>
[file format of input and output should be equal]
> This raises the following questions:
>
> Q1) One of the formats in which I can send data to the USRP is as IQ data.
> What does the USRP do with IQ data pairs? In the USRP documentation there is
> a block diagram of the Digital Down Converter, but there is no diagram of the
> Digital Up Converter.
It is exactly the opposite of the DDC. The fundamental concept here is that
sine and cosine are orthogonal, i.e., one can transmit a ("real") valued
signal modulated by a sine and, at the same time, transmit another
("real") signal modulated by a cosine. Just add them up
and seperate them by demodulation (and filtering) in the receiver.
This should answer your question: if you're just concerned with
transmission of the data, you can divide your input stream
into 2 streams and transmit one over I and the other over the Q branch.
You might want to preprocess your signal and transmit it digitally,
though (to add channel coding, synch frame etc.).
If you're looking at a radar/sonar application or simple AM, you
probably just want one carrier. Leave the I or Q branch blank.
Regards,
Jens
- [Discuss-gnuradio] Recovering x(t) from IQ samples, Bahn William L Civ USAFA/DFCS, 2007/08/16
- RE: [Discuss-gnuradio] Recovering x(t) from IQ samples, Bahn William L Civ USAFA/DFCS, 2007/08/16
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Johnathan Corgan, 2007/08/17
- RE: [Discuss-gnuradio] Recovering x(t) from IQ samples, Bahn William L Civ USAFA/DFCS, 2007/08/17
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples,
Jens Elsner <=
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Jonathan P Jacky, 2007/08/18
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Jeff Brower, 2007/08/18
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Jonathan Jacky, 2007/08/20
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Chris Stankevitz, 2007/08/20
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Brian Padalino, 2007/08/20
- Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Jens Elsner, 2007/08/18
- [Discuss-gnuradio] Problem with the FPGA firmware (getting clock like output only), eenrti, 2007/08/19
Re: [Discuss-gnuradio] Recovering x(t) from IQ samples, Jeff Brower, 2007/08/17