[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Matlab interface to USRP

From: Jeff Brower
Subject: Re: [Discuss-gnuradio] Matlab interface to USRP
Date: Wed, 9 Apr 2008 11:42:37 -0500 (CDT)
User-agent: SquirrelMail/1.4.2-1


>> I understand completely your viewpoint.  However, let me point out that
>> one of your key objectives should be to
>> increase popularity of GNU Radio software.  One way to do this is to
>> encourage and support GNU Radio software examples
>> that interface with MATLAB in some way.
> Yes, you are right in that, but the person that originally posted did not
> like to use GNU Radio; He wanted to interface USRP to Matlab directly
> without GNU Radio in the middle (in fact he managed to interface Matlab with
> GNU Radio). USRP developers/users perhaps would like a USRP-Matlab direct
> connection, but GNU Radio developers/users surely not.
> This is the original post:

Ya I know, I had read the original post.  I would say that it's not possible to 
have it both ways, there is either
basic encouragement for GNU Radio interface with MATLAB or there is not.  I 
think drawing the line at not providing
support for interfacing MATLAB directly to USRP hardware is fine, although I 
would note that over the years people
have interfaced MATLAB to many types of data acq/DSP/FPGA hardware that 
originally didn't support MATLAB.  It happens.

Even in these borderline cases, people who see the bigger picture -- especially 
the Professors and instructors who
influence our future engineers -- will clearly see the advantages of USRP and 
start asking "what happens if we use GNU
Radio".  Any increased awareness of GNU Radio is a good thing.


>>----- Original Message -----
>>From: "Pu, Di" <address@hidden>
>>To: <address@hidden>
>>Sent: Wednesday, April 09, 2008 12:03 AM
>>Subject: [Discuss-gnuradio] Matlab interface to USRP
>>Hello all,
>>I am trying to figure out the Matlab interface to USRP. Although I could
>>enable the communications between Matlab and GNU Radio, I am wondering
>>whether it  is possible to make Matlab hook to USRP directly without GNU
>>radio. Thank you very much!
> Pedro Ignacio Martos

reply via email to

[Prev in Thread] Current Thread [Next in Thread]